FSc Mix Chemistry MCQs Quiz Online for MDCAT

Mixed-topic Chemistry bank (45 MCQs) for rapid MDCAT revision — one question at a time with instant checking.
All chapters
Question 1 of 45 Score: 0

All FSc Mix — Chemistry (all topics) MCQs with answers

45 MCQs for MDCAT Chemistry. The quiz above checks one question at a time. Every question, option, and saved explanation is on this page.

  1. Q1.

    The correct outer electronic configuration of chromium (Z = 24) is:

    1. A) 4s1 3d5

    2. B) 4s2 3d4

    3. C) 4s3 3d6

    4. D) None

    Answer: A

    To determine the electronic configuration of Chromium (\( Z = 24 \)), we must look at how its 24 electrons are distributed across the atomic orbitals. Based on the standard Aufbau principle, which suggests filling orbitals in order of increasing energy, one might expect the configuration to end in \( 4s^{2} 3d^{4} \). However, Chromium is a significant exception to this general rule.

    The actual outer electronic configuration of Chromium is 4s1 3d5. This occurs because an electron from the \( 4s \) orbital is promoted to the \( 3d \) orbital. This transition happens due to the extra stability associated with half-filled and fully-filled subshells.

    There are two main reasons for this increased stability:
    1. Symmetry: A half-filled \( 3d^{5} \) subshell is more symmetrical than a \( 3d^{4} \) subshell. In quantum mechanics, symmetry is often associated with lower energy and greater stability.
    2. Exchange Energy: Electrons with the same spin in degenerate orbitals (orbitals with the same energy) can exchange their positions. Each exchange releases a small amount of energy called exchange energy. The number of possible exchanges is maximized when a subshell is half-filled (\( d^{5} \)) or fully filled (\( d^{10} \)), leading to a more stable, lower-energy state.

    By moving one electron from the \( 4s \) orbital to the \( 3d \) orbital, Chromium achieves two half-filled subshells (\( 4s^{1} \) and \( 3d^{5} \)), which is energetically more favorable than the expected \( 4s^{2} 3d^{4} \) arrangement.

    Chromium adopts the \( 4s^{1} 3d^{5} \) configuration because the stability gained from a half-filled d-subshell outweighs the energy required to promote an electron from the 4s orbital.
  2. Q2.

    The Aufbau Principle states that

    1. A) Only two electrons can occupy an orbital

    2. B) Electrons enter the lowest available energy level

    3. C) Electrons tend to occupy empty orbitals and avoid pairing

    4. D) Orbitals are regions where probability of finding electrons is maximum

    Answer: B

    The Aufbau Principle is a fundamental concept in chemistry used to determine the electron configuration of an atom. The term Aufbau is derived from the German word for "building up," which accurately describes how electrons are added to an atom's orbitals.

    According to this principle, in the ground state of an atom or ion, electrons fill atomic orbitals of the lowest available energy levels before occupying higher energy levels. This ensures that the atom maintains the most stable energy configuration possible. For example, the \( 1s \) orbital is always filled before the \( 2s \) orbital because it has a lower energy state.

    To clarify the other options provided:
    1. Option A describes the Pauli Exclusion Principle, which states that an orbital can hold a maximum of two electrons, and they must have opposite spins.
    2. Option C describes Hund's Rule of Maximum Multiplicity, which explains that electrons will occupy empty orbitals of the same energy individually before they begin to pair up.
    3. Option D is simply the general definition of an atomic orbital according to quantum mechanics.

    The sequence in which orbitals are filled is often determined by the \( (n + l) \) rule, where \( n \) represents the principal quantum number and \( l \) represents the azimuthal quantum number. Orbitals with a lower \( n + l \) value are filled first; if two orbitals have the same value, the one with the lower \( n \) is filled first.

    In summary, the Aufbau Principle states that electrons must occupy the lowest energy orbitals available to achieve a stable ground state configuration.
  3. Q3.

    Which of the following ions contains 5 unpaired electrons?

    1. A) Cr3+

    2. B) Fe3+

    3. C) Mn2+

    4. D) b and c both

    Answer: D

    To determine the number of unpaired electrons in each ion, we must first look at the electronic configurations of the neutral atoms and then account for the electrons lost during the formation of the ions.

    1. Analysis of Chromium (\(Cr^{3+}\)):
    The atomic number of Chromium (\(Cr\)) is 24. Its neutral ground-state electronic configuration is \([Ar] 3d^{5} 4s^{1}\). To form the \(Cr^{3+}\) ion, the atom loses three electrons: one from the \(4s\) orbital and two from the \(3d\) orbital. The resulting configuration is:
    \[Cr^{3+} = [Ar] 3d^{3}\]
    In the \(3d\) subshell, there are 5 orbitals. With 3 electrons, only 3 orbitals are occupied by single electrons, meaning there are 3 unpaired electrons.

    2. Analysis of Iron (\(Fe^{3+}\)):
    The atomic number of Iron (\(Fe\)) is 26. Its neutral ground-state electronic configuration is \([Ar] 3d^{6} 4s^{2}\). To form the \(Fe^{3+}\) ion, the atom loses three electrons: two from the \(4s\) orbital and one from the \(3d\) orbital. The resulting configuration is:
    \[Fe^{3+} = [Ar] 3d^{5}\]
    According to Hund's Rule, electrons fill degenerate orbitals (orbitals of the same energy) singly before they begin to pair. Since there are five \(d\) orbitals and five electrons, each orbital contains one electron. Therefore, \(Fe^{3+}\) has 5 unpaired electrons.

    3. Analysis of Manganese (\(Mn^{2+}\)):
    The atomic number of Manganese (\(Mn\)) is 25. Its neutral ground-state electronic configuration is \([Ar] 3d^{5} 4s^{2}\). To form the \(Mn^{2+}\) ion, the atom loses two electrons from the \(4s\) orbital. The resulting configuration is:
    \[Mn^{2+} = [Ar] 3d^{5}\]
    Just like the iron ion above, the five electrons in the \(3d\) subshell occupy the five \(d\) orbitals singly. Therefore, \(Mn^{2+}\) also has 5 unpaired electrons.

    Because both \(Fe^{3+}\) and \(Mn^{2+}\) possess five unpaired electrons, the correct option is D.

    In summary, both \(Fe^{3+}\) and \(Mn^{2+}\) ions have a half-filled \(d\) subshell consisting of five unpaired electrons.
  4. Q4.

    The number of hybridized orbitals in sp hybridized carbon atom is

    1. A) 1

    2. B) 2

    3. C) 3

    4. D) 4

    Answer: B

    To understand the number of hybridized orbitals in an sp hybridized carbon atom, we must look at the process of orbital mixing. Hybridization is a chemical concept where atomic orbitals of slightly different energies in the same atom redistribute their energy to form a new set of equivalent orbitals.

    In sp hybridization, one s orbital and one p orbital (typically the \( 2s \) and one of the \( 2p \) orbitals in the valence shell of carbon) combine. A fundamental rule of hybridization states that the number of hybrid orbitals formed is always equal to the total number of pure atomic orbitals that were mixed together.

    Since the process involves the combination of:
    1. One s orbital
    2. One p orbital

    The total number of orbitals mixing is \( 1 + 1 = 2 \). Consequently, exactly two sp hybrid orbitals are created. These two orbitals are identical in shape and energy. To minimize electron repulsion, they arrange themselves in a linear geometry with a bond angle of \( 180^{\circ} \).

    In a carbon atom, which has four valence electrons, two electrons occupy these two sp hybrid orbitals to form sigma (\( \sigma \)) bonds. The remaining two valence electrons stay in the two unhybridized p orbitals (the \( p_{y} \) and \( p_{z} \) orbitals), which are then available to form pi (\( \pi \)) bonds, such as those found in triple bonds (e.g., in ethyne, \( C_{2}H_{2} \)).

    Because the name sp itself denotes the mixing of one s and one p orbital, the resulting count of hybrid orbitals is two.

    In summary, an sp hybridized carbon atom possesses 2 hybridized orbitals formed from the mixing of two atomic orbitals.
  5. Q5.

    VSEPR theory is used to predict:

    1. A) Molecular mass

    2. B) Molecular shape

    3. C) Reaction rate

    4. D) Ionization energy

    Answer: B

    VSEPR stands for Valence Shell Electron Pair Repulsion theory. This model is based on the fundamental principle that pairs of electrons in the valence shell of a central atom carry negative charges and, therefore, repel each other.

    To minimize this repulsion and achieve the most stable, low-energy state, these electron pairs (which include both bonding pairs and non-bonding lone pairs) arrange themselves as far apart as possible in three-dimensional space. The specific arrangement they take directly determines the molecular shape or geometry of the molecule. For example, if there are four electron pairs around a central atom, they will naturally move toward the corners of a tetrahedron to maximize their distance from one another.

    The other options provided are unrelated to this theory: molecular mass is determined by the sum of atomic weights, reaction rate is a concept in chemical kinetics, and ionization energy relates to the energy required to remove an electron from an atom.

    In summary, VSEPR theory is the primary tool used by chemists to predict the three-dimensional geometric structure of molecules based on electron repulsion.
  6. Q6.

    In VSEPR theory, lone pairs cause:

    1. A) Increase in bond length

    2. B) Decrease in bond angle

    3. C) No change in geometry

    4. D) Ionic bonding

    Answer: B

  7. Q7.

    No. of moles of oxygen molecules in 0.5 moles of Al2(SO4)3:

    1. A) 6

    2. B) 3

    3. C) 12

    4. D) 4

    Answer: B

    To find the number of moles of oxygen molecules in 0.5 moles of Al2(SO4)3, we must first analyze the chemical formula to determine the quantity of oxygen atoms present.

    The formula Al2(SO4)3 shows that there are 3 sulfate groups (\( SO_4 \)) for every unit of the compound. Each sulfate group contains 4 oxygen atoms. Therefore, in 1 mole of Al2(SO4)3, the total number of moles of oxygen atoms is calculated as:
    \[ 3 \times 4 = 12 \text{ moles of oxygen atoms (O)} \]

    The question asks for the number of oxygen molecules (\( O_2 \)). An oxygen molecule is diatomic, meaning it consists of 2 oxygen atoms. To find the number of moles of \( O_2 \) molecules in 1 mole of the compound, we divide the total number of oxygen atoms by 2:
    \[ \frac{12 \text{ atoms}}{2} = 6 \text{ moles of } O_2 \text{ molecules} \]

    Since the question asks for the amount in 0.5 moles of Al2(SO4)3, we multiply the result by 0.5:
    \[ 0.5 \text{ moles of compound} \times 6 \text{ moles of } O_2 = 3 \text{ moles of } O_2 \]

    This confirms that there are 3 moles of oxygen molecules in 0.5 moles of aluminum sulfate.

    By determining that 1 mole of the compound contains 6 moles of diatomic oxygen molecules, we can conclude that half a mole of the compound contains exactly 3 moles of oxygen molecules.
  8. Q8.

    Which of the following mass has greatest number of moles?

    1. A) 10g of NaOH

    2. B) 10g of glucose

    3. C) 4g of He

    4. D) 50g of CaCO3

    Answer: C

    To determine which substance has the greatest number of moles, we use the fundamental formula for calculating moles:
    \[ n = \frac{m}{M} \]
    where \( n \) is the number of moles, \( m \) is the given mass in grams, and \( M \) is the molar mass of the substance in grams per mole (g/mol).

    Step 1: Calculate moles for Option A (10g of NaOH)
    The molar mass of NaOH is calculated as: \( 23 (Na) + 16 (O) + 1 (H) = 40 \text{ g/mol} \).
    \[ n = \frac{10}{40} = 0.25 \text{ moles} \]

    Step 2: Calculate moles for Option B (10g of glucose)
    The chemical formula for glucose is \( C_{6}H_{12}O_{6} \). Its molar mass is: \( (6 \times 12) + (12 \times 1) + (6 \times 16) = 180 \text{ g/mol} \).
    \[ n = \frac{10}{180} \approx 0.055 \text{ moles} \]

    Step 3: Calculate moles for Option C (4g of He)
    The molar mass of Helium (He) is approximately \( 4 \text{ g/mol} \).
    \[ n = \frac{4}{4} = 1.0 \text{ mole} \]

    Step 4: Calculate moles for Option D (50g of CaCO\(_{3}\))
    The molar mass of \( CaCO_{3} \) is: \( 40 (Ca) + 12 (C) + (3 \times 16) (O) = 100 \text{ g/mol} \).
    \[ n = \frac{50}{100} = 0.5 \text{ moles} \]

    Conclusion:
    Comparing the results:
    - NaOH: 0.25 moles
    - Glucose: 0.055 moles
    - Helium: 1.0 mole
    - \( CaCO_{3} \): 0.5 moles

    The substance with the highest value is 4g of Helium, which equals 1.0 mole.

    Summary: By dividing the given mass by the respective molar mass for each substance, we find that 4g of Helium contains the largest number of moles compared to the other options.
  9. Q9.

    Vol. of H2 gas required to produce 0.1 moles of HCl at STP H2 + Cl2 -> 2HCl

    1. A) 11.2 L

    2. B) 1.12 L

    3. C) 1.12 mL

    4. D) 0.56 L

    Answer: B

    To determine the volume of H2 gas required, we must first analyze the balanced chemical equation provided:
    \[ H_2 + Cl_2 \rightarrow 2HCl \]
    Step 1: Understand the Stoichiometry
    From the balanced equation, we can see that 1 mole of H2 gas reacts to produce 2 moles of HCl gas. This gives us a molar ratio of 1:2 between H2 and HCl.

    Step 2: Calculate the Moles of H2 Required
    The question asks for the amount of H2 needed to produce 0.1 moles of HCl. Using the molar ratio, we calculate the required moles of H2 as follows:
    \[ \text{Moles of } H_2 = \frac{1 \text{ mole of } H_2}{2 \text{ moles of } HCl} \times 0.1 \text{ moles of } HCl \] \[ \text{Moles of } H_2 = 0.05 \text{ moles} \]
    Step 3: Convert Moles to Volume at STP
    At Standard Temperature and Pressure (STP), 1 mole of any ideal gas occupies a volume of 22.4 liters. To find the volume of 0.05 moles of H2, we use the formula:
    \[ \text{Volume} = \text{moles} \times \text{molar volume at STP} \] \[ \text{Volume} = 0.05 \text{ moles} \times 22.4 \text{ L/mol} \] \[ \text{Volume} = 1.12 \text{ L} \]
    Comparing this result to the given options, we find that 1.12 L corresponds to option B.

    Summary: By using the stoichiometric ratio from the balanced equation and the molar volume of a gas at STP, we find that 1.12 L of hydrogen gas is needed to produce 0.1 moles of hydrogen chloride.
  10. Q10.

    Which one is limiting reagent, if 3.5 mL of H2 and 3.5 mL of Cl2 react to produce HCl? H2 + Cl2 -> 2HCl

    1. A) Cl2

    2. B) H2

    3. C) Both A & B

    4. D) None

    Answer: D

    To determine the limiting reagent, we must first look at the balanced chemical equation for the reaction:
    \[ H_{2}(g) + Cl_{2}(g) \rightarrow 2HCl(g) \]
    From the coefficients in the balanced equation, we can see that 1 mole of hydrogen gas (\( H_{2} \)) reacts with 1 mole of chlorine gas (\( Cl_{2} \)). According to Avogadro's Law, equal volumes of gases at the same temperature and pressure contain an equal number of moles. This means that the volume ratio of the reactants is the same as their molar ratio.
    In this specific reaction, the stoichiometric ratio is:
    \[ 1 \text{ volume of } H_{2} : 1 \text{ volume of } Cl_{2} \]
    The problem states that we have 3.5 mL of \( H_{2} \) and 3.5 mL of \( Cl_{2} \). Since the volumes provided are exactly equal, they match the 1:1 ratio required by the chemical equation perfectly.
    A limiting reagent is defined as the reactant that is completely consumed first in a chemical reaction, which limits the amount of product that can be formed. In this scenario, since both gases are provided in the exact amounts needed to react with each other completely, neither reactant will be left over, and neither is in short supply relative to the other.
    Therefore, because both reactants are consumed simultaneously and completely, there is no limiting reagent.
    Because the reactants are provided in the exact stoichiometric ratio required for the reaction, neither substance acts as a limiting reagent.
  11. Q11.

    Considering canal rays, which one has maximum e/m?

    1. A) Hydrogen

    2. B) Nitrogen

    3. C) Oxygen

    4. D) Helium

    Answer: A

    Canal rays, also known as anode rays, consist of positively charged ions that are produced when gas atoms in a discharge tube lose electrons due to high-voltage ionization. Unlike cathode rays (electrons), the properties of canal rays, specifically the charge-to-mass ratio \( (e/m) \), depend entirely on the type of gas used in the tube.

    The \( e/m \) ratio is defined as the ratio of the electrical charge of the particle to its mass. To find the maximum \( e/m \) value, we need to look for the particle that has the smallest mass, as the ratio is inversely proportional to the mass of the ion: \[ \frac{e}{m} \propto \frac{1}{m} \]
    Comparing the given options based on their atomic masses:
    1. Hydrogen: The mass of a hydrogen ion (a proton) is approximately \( 1 \) atomic mass unit (amu).
    2. Helium: The mass of a helium ion is approximately \( 4 \) amu.
    3. Nitrogen: The mass of a nitrogen ion is approximately \( 14 \) amu.
    4. Oxygen: The mass of an oxygen ion is approximately \( 16 \) amu.

    Since Hydrogen is the lightest element in the periodic table, its ion has the smallest mass among all the options. Consequently, the \( e/m \) ratio for hydrogen canal rays is the highest, with a value of approximately \( 9.58 \times 10^{7} \) C/kg.

    Hydrogen has the maximum \( e/m \) ratio because it possesses the smallest atomic mass of all known elements.
  12. Q12.

    Considering e/m of canal rays the correct order is:

    1. A) Hydrogen > Helium > Nitrogen

    2. B) Nitrogen > Helium > Hydrogen

    3. C) Nitrogen = Helium = Hydrogen

    4. D) All are correct

    Answer: A

    To understand the correct order of the \( e/m \) ratio for canal rays, we must first define what canal rays are. Canal rays, also known as anode rays, consist of positively charged ions created when electrons collide with neutral gas atoms in a discharge tube, knocking away one or more electrons.

    The ratio \( e/m \) is known as the specific charge, where:
    \( e \) represents the magnitude of the charge on the ion.
    \( m \) represents the mass of the ion.

    For a standard comparison of different gases, we typically consider ions carrying a single positive charge. In this case, the value of the \( e/m \) ratio is inversely proportional to the mass of the ion. This relationship can be expressed as:
    \[ \frac{e}{m} \propto \frac{1}{m} \]
    Now, let us compare the approximate atomic masses of the elements provided in the options:
    1. Hydrogen (H): Atomic mass is approximately \( 1 \text{ u} \).
    2. Helium (He): Atomic mass is approximately \( 4 \text{ u} \).
    3. Nitrogen (N): Atomic mass is approximately \( 14 \text{ u} \).

    Since Hydrogen has the smallest mass (\( m \)), it will yield the largest \( e/m \) value. Nitrogen has the largest mass among the three, which results in the smallest \( e/m \) value. Helium falls in the middle.

    Following this logic, the decreasing order of the \( e/m \) ratio is:
    Hydrogen > Helium > Nitrogen

    This confirms that Option A is the correct answer.

    In summary, the \( e/m \) ratio for canal rays is highest for Hydrogen because it is the lightest element, and the ratio decreases as the atomic mass of the gas increases.
  13. Q13.

    The number of orbitals present in 6th orbit:

    1. A) 36

    2. B) 25

    3. C) 15

    4. D) 14

    Answer: A

    To determine the number of orbitals in a specific orbit (also known as a principal energy level), we refer to the rules of quantum mechanics. The principal quantum number, represented by the symbol \( n \), identifies the shell or orbit level.

    There is a direct mathematical relationship between the principal quantum number and the total number of orbitals contained within that shell. The formula is: \[ \text{Total number of orbitals} = n^2 \]
    In this problem, we are asked to find the number of orbitals in the 6th orbit. This means that \( n = 6 \).

    By substituting the value of \( n \) into the formula, we get: \[ 6^2 = 6 \times 6 = 36 \]
    To understand why this works, we can look at the subshells available in the 6th shell. For \( n = 6 \), the azimuthal quantum number (\( l \)) can have values from 0 to 5, which correspond to different subshells:
    - s-subshell (\( l = 0 \)): 1 orbital
    - p-subshell (\( l = 1 \ )): 3 orbitals
    - d-subshell (\( l = 2 \)): 5 orbitals
    - f-subshell (\( l = 3 \)): 7 orbitals
    - g-subshell (\( l = 4 \)): 9 orbitals
    - h-subshell (\( l = 5 \)): 11 orbitals

    Adding these together: \( 1 + 3 + 5 + 7 + 9 + 11 = 36 \).

    Therefore, the total number of orbitals in the 6th orbit is 36, making option A the correct choice.

    Summary: The total number of orbitals in any shell is equal to the square of the principal quantum number (\( n^2 \)), which for the 6th orbit equals 36.
  14. Q14.

    Which one can explain the size of orbit?

    1. A) n

    2. B) l

    3. C) m

    4. D) s

    Answer: A

    The principal quantum number, denoted by n, is the primary factor that determines the size and energy of an atomic orbital.
    In the quantum mechanical model of the atom, n represents the main energy level or shell. As the value of n increases (for example, from \( n = 1 \) to \( n = 2 \)), the electron is likely to be found at a greater distance from the nucleus. This increase in distance directly results in a larger orbital size.
    The other quantum numbers provided in the options describe different characteristics of the electron's environment:
    1. l (Azimuthal or Angular Momentum quantum number) determines the shape of the orbital (such as s, p, d, or f).
    2. m (Magnetic quantum number) determines the orientation of the orbital in three-dimensional space.
    3. s (Spin quantum number) describes the direction of spin of the electron on its own axis.
    Because the principal quantum number n dictates the shell level and the average distance of the electron from the nucleus, it is the only one that explains the size of the orbit.
    In summary, the principal quantum number n defines the main energy level and the overall size of the orbital.
  15. Q15.

    If l = 4, the total values of "m" will be:

    1. A) 9

    2. B) 10

    3. C) 6

    4. D) 4

    Answer: A

    To determine the total number of values for the magnetic quantum number (m), we must understand its relationship with the azimuthal quantum number (l).

    In atomic physics, the magnetic quantum number m (often written as ml) determines the number of orbitals and their orientation within a subshell. For any given value of l, the possible values of m range from -l to +l, including zero. The standard formula to find the total number of these values is:

    \[ \text{Total values of } m = 2l + 1 \]

    By substituting the given value of \( l = 4 \) into this formula, we get:

    \[ \text{Total values} = 2(4) + 1 \]
    \[ \text{Total values} = 8 + 1 \]
    \[ \text{Total values} = 9 \]

    To visualize this, the specific values for m when \( l = 4 \) are: \( -4, -3, -2, -1, 0, +1, +2, +3, \text{ and } +4 \). If you count these individual integers, you will find there are exactly 9 values in total.

    This confirms that for a subshell where \( l = 4 \) (which corresponds to a g orbital in theoretical chemistry), there are 9 possible spatial orientations.

    In summary, applying the formula \( 2l + 1 \) with \( l = 4 \) results in a total of 9 possible values for the magnetic quantum number.
  16. Q16.

    Which one has no paired "p" electrons?

    1. A) 6C

    2. B) 8O

    3. C) 11Na

    4. D) 12Mg

    Answer: A

    To determine which element has no paired "p" electrons, we must examine the electronic configurations of each atom and apply Hund's Rule of Maximum Multiplicity. This rule states that for a given electron subshell, the lowest energy is attained when the number of electrons with the same spin is maximized; essentially, electrons occupy degenerate orbitals (orbitals with the same energy) singly before they start to pair up.

    Option A: Carbon (6C)
    The atomic number of Carbon is 6. Its electronic configuration is: \[ 1s^{2} 2s^{2} 2p^{2} \] In the \( 2p \) subshell, there are three available orbitals (\( 2p_{x}, 2p_{y}, 2p_{z} \)). Following Hund's rule, the 2 electrons in the \( p \) subshell will occupy two separate orbitals with parallel spins: \[ 2p_{x}^{1} 2p_{y}^{1} 2p_{z}^{0} \] Because these electrons are in different orbitals, Carbon has no paired "p" electrons.

    Option B: Oxygen (8O)
    The atomic number of Oxygen is 8. Its electronic configuration is: \[ 1s^{2} 2s^{2} 2p^{4} \] The four electrons in the \( 2p \) subshell are distributed across the three orbitals. After each orbital receives one electron, the fourth electron must pair up with one of the existing electrons: \[ 2p_{x}^{2} 2p_{y}^{1} 2p_{z}^{1} \] This results in one pair of "p" electrons.

    Option C: Sodium (11Na)
    The atomic number of Sodium is 11. Its electronic configuration is: \[ 1s^{2} 2s^{2} 2p^{6} 3s^{1} \] The \( 2p \) subshell is completely filled with 6 electrons. In a full subshell, every orbital contains a pair of electrons: \[ 2p_{x}^{2} 2p_{y}^{2} 2p_{z}^{2} \] Thus, Sodium has three pairs of "p" electrons.

    Option D: Magnesium (12Mg)
    The atomic number of Magnesium is 12. Its electronic configuration is: \[ 1s^{2} 2s^{2} 2p^{6} 3s^{2} \] Like Sodium, the \( 2p \) subshell is completely filled with 6 electrons, meaning all "p" electrons are paired.

    Carbon is the only atom listed where the electrons in the "p" subshell occupy separate orbitals singly, leaving them unpaired.

    Summary: Carbon has no paired "p" electrons because its two \( 2p \) electrons occupy separate orbitals singly to satisfy Hund's rule.
  17. Q17.

    In which one of the following species the central atom is sp2 hybridized?

    1. A) SO2

    2. B) BF3

    3. C) CH3+

    4. D) All

    Answer: D

    To determine the hybridization of a central atom, we calculate the steric number, which is the sum of the number of sigma bonds and the number of lone pairs on that atom. For \( sp^2 \) hybridization, the steric number must be 3.

    1. Analysis of \( SO_{2} \) (Sulfur Dioxide):
    The central atom is Sulfur (S), which has 6 valence electrons. In \( SO_{2} \), sulfur forms two double bonds with two oxygen atoms and retains one lone pair. For the purpose of determining hybridization, a double bond counts as one sigma bond. Therefore, the steric number is 2 sigma bonds + 1 lone pair = 3. This corresponds to \( sp^2 \) hybridization.

    2. Analysis of \( BF_{3} \) (Boron Trifluoride):
    The central atom is Boron (B), which has 3 valence electrons. It forms three single sigma bonds with three fluorine atoms, leaving no lone pairs on the boron atom. The steric number is 3 sigma bonds + 0 lone pairs = 3. Thus, the boron atom in \( BF_{3} \) is \( sp^2 \) hybridized.

    3. Analysis of \( CH_{3}^{+} \) (Methyl Cation):
    The central atom is Carbon (C), which normally has 4 valence electrons. The positive charge indicates the loss of one electron, leaving 3 valence electrons available for bonding. These 3 electrons form three sigma bonds with three hydrogen atoms, with no lone pairs remaining. The steric number is 3 sigma bonds + 0 lone pairs = 3. Consequently, the carbon atom in \( CH_{3}^{+} \) is \( sp^2 \) hybridized.

    Conclusion:
    Since the central atoms in \( SO_{2} \), \( BF_{3} \), and \( CH_{3}^{+} \) all have a steric number of 3, they are all \( sp^2 \) hybridized.

    Therefore, all the given species feature a central atom with \( sp^2 \) hybridization.
  18. Q18.

    Which of the following has greatest bond energy?

    1. A) O2

    2. B) N2

    3. C) H2

    4. D) All

    Answer: B

    To determine which molecule has the greatest bond energy, we must examine the bond order and the nature of the chemical bonds between the atoms in each molecule. Bond energy is defined as the amount of energy required to break one mole of a bond in a chemical substance. Generally, as the number of bonds between two atoms increases, the bond strength increases, leading to higher bond energy.

    1. Nitrogen (\( N_{2} \)):
    Nitrogen atoms are held together by a triple covalent bond (\( N \equiv N \)). This triple bond consists of one sigma bond and two pi bonds. Because of this high bond order (Bond Order = 3), the nitrogen molecule is exceptionally stable and requires a very large amount of energy to dissociate. The bond energy of \( N_{2} \) is approximately \( 945 \text{ kJ/mol} \).

    2. Oxygen (\( O_{2} \)):
    Oxygen atoms are connected by a double covalent bond (\( O=O \)). This consists of one sigma bond and one pi bond. With a bond order of 2, the bond energy is significant but considerably lower than that of nitrogen. The bond energy of \( O_{2} \) is approximately \( 498 \text{ kJ/mol} \).

    3. Hydrogen (\( H_{2} \)):
    Hydrogen atoms are joined by a single covalent bond (\( H-H \)). This is a sigma bond with a bond order of 1. While the bond is strong relative to the size of the atoms, it lacks the additional pi bonds found in oxygen and nitrogen. The bond energy of \( H_{2} \) is approximately \( 436 \text{ kJ/mol} \).

    Comparing these molecules, the triple bond in nitrogen results in the highest bond energy among the choices provided.

    Summary: Nitrogen has the greatest bond energy because its atoms are linked by a triple covalent bond, which is much stronger and harder to break than the double bond in oxygen or the single bond in hydrogen.
  19. Q19.

    Dipole moment is ______ quantity.

    1. A) Vector

    2. B) Scalar

    3. C) Tensor

    4. D) None

    Answer: A

    The dipole moment is a physical measurement used to describe the separation of positive and negative electrical charges within a system. To fully define this quantity, one must provide both its magnitude and its specific orientation in space.

    In physics, the electric dipole moment \( \vec{p} \) is mathematically defined by the following formula:
    \[ \vec{p} = q \cdot \vec{d} \]
    In this equation, \( q \) represents the magnitude of the charge and \( \vec{d} \) represents the displacement vector pointing from the negative charge to the positive charge. Because the dipole moment is the product of a scalar (charge) and a vector (displacement), the resulting quantity is a vector.

    Furthermore, when determining the net dipole moment of a complex molecule or a system of charges, the individual moments must be combined using vector addition. This means that the angles between the different dipoles significantly affect the total result, a characteristic that is unique to vector quantities and not scalar quantities.

    In summary, because the dipole moment possesses both a defined magnitude and a specific direction, it is classified as a vector quantity.
  20. Q20.

    W.O.F is ionic in nature?

    1. A) HF

    2. B) NaCl

    3. C) HCl

    4. D) All

    Answer: B

    To determine which of the given compounds is ionic in nature, we must examine the types of atoms involved and how they bond with each other.

    1. The Nature of Ionic Bonding:
    An ionic bond generally forms between a metal and a non-metal. This occurs when one or more electrons are completely transferred from the metal atom to the non-metal atom. This transfer creates positively charged ions (cations) and negatively charged ions (anions) that are held together by strong electrostatic forces of attraction.

    2. Evaluating the Options:
    - HF (Hydrogen Fluoride): Both Hydrogen and Fluorine are non-metals. While Fluorine is highly electronegative, the bond between them involves the sharing of electrons rather than a complete transfer. Therefore, HF is a polar covalent compound.
    - NaCl (Sodium Chloride): Sodium (\( Na \)) is a metal from Group 1 of the periodic table, and Chlorine (\( Cl \)) is a non-metal from Group 17. Sodium loses its single valence electron to become a \( Na^{+} \) ion, and Chlorine accepts that electron to become a \( Cl^{-} \) ion. This resulting attraction makes NaCl a classic example of an ionic compound.
    - HCl (Hydrogen Chloride): Similar to HF, both Hydrogen and Chlorine are non-metals. They share electrons to achieve stability, which results in a polar covalent bond.

    3. Why "All" is incorrect:
    Since HF and HCl are covalent molecules, the option "All" cannot be correct. Only NaCl fits the criteria for an ionic substance.

    Sodium chloride is the correct answer because it is formed by the transfer of electrons between a metal and a non-metal, resulting in a crystalline ionic structure.
  21. Q21.

    Canal rays move in the direction of:

    1. A) Cathode to anode

    2. B) Anode to cathode

    3. C) In random direction

    4. D) They do not move

    Answer: B

  22. Q22.

    The simplest canal rays are:

    1. A) Neutrons

    2. B) Electrons

    3. C) Protons

    4. D) All

    Answer: C

  23. Q23.

    The quantum number that is not derived from Schrodinger wave equation is:

    1. A) Principal quantum number

    2. B) Spin quantum number

    3. C) Azimuthal quantum number

    4. D) Magnetic quantum number

    Answer: B

  24. Q24.

    Hund's rule is not followed in the electronic configuration of:

    1. A) Carbon

    2. B) Nitrogen

    3. C) Beryllium

    4. D) None

    Answer: D

    To understand why the correct answer is None, we must first define Hund's Rule of Maximum Multiplicity. This rule states that when filling degenerate orbitals (orbitals of the same energy, such as the three \( p \) orbitals), electrons will occupy them singly with parallel spins before any pairing occurs. This behavior minimizes electron-electron repulsion within the atom.

    Let us analyze the electronic configurations of the given elements:

    1. Carbon (Z = 6): The ground-state configuration is \( 1s^{2} 2s^{2} 2p^{2} \). In the \( 2p \) subshell, there are three degenerate orbitals. According to Hund's rule, the two electrons will occupy two separate orbitals (e.g., \( 2p_{x}^{1} 2p_{y}^{1} \)) with parallel spins. Carbon strictly follows this rule.

    2. Nitrogen (Z = 7): The ground-state configuration is \( 1s^{2} 2s^{2} 2p^{3} \). In this case, the three electrons in the \( 2p \) subshell occupy all three degenerate orbitals (\( 2p_{x}^{1} 2p_{y}^{1} 2p_{z}^{1} \)) individually with parallel spins. This half-filled state is a perfect application of Hund's rule.

    3. Beryllium (Z = 4): The ground-state configuration is \( 1s^{2} 2s^{2} \). Since the \( s \) subshell consists of only one orbital, there are no degenerate orbitals to distribute electrons across at this energy level. Beryllium follows the Aufbau principle and Pauli Exclusion Principle, and it does not violate Hund's rule because the rule only applies when multiple orbitals of the same energy are available.

    Because all three elements follow the standard principles of electronic distribution in their ground states, none of them represent a violation of Hund's rule.

    In summary, all the listed elements adhere to Hund's rule in their ground-state electronic configurations, making "None" the correct choice.
  25. Q25.

    For a given energy sub-level, the total values of magnetic quantum number are:

    1. A) n - 1

    2. B) 2l + 1

    3. C) 4l + 2

    4. D) None

    Answer: B

  26. Q26.

    No two electron can have same spin in an orbital. This is:

    1. A) Hund's rule

    2. B) Pauli Exclusion Principle

    3. C) Aufbau rule

    4. D) None of these

    Answer: B

    The Pauli Exclusion Principle, formulated by Wolfgang Pauli in 1925, is a fundamental rule in quantum mechanics. It states that no two electrons in an atom can have the same set of all four quantum numbers: the principal quantum number (\(n\)), the azimuthal quantum number (\(l\)), the magnetic quantum number (\(m_l\)), and the spin quantum number (\(m_s\)).

    An atomic orbital is defined by the first three quantum numbers (\(n, l,\) and \(m_l\)). This means that any two electrons occupying the same orbital already share these three identical values. For the Pauli Exclusion Principle to be satisfied, these two electrons must differ in their fourth quantum number, which is the spin quantum number (\(m_s\)).

    Since the spin quantum number can only have two possible values, \(+1/2\) (spin up) and \(-1/2\) (spin down), an orbital can accommodate a maximum of two electrons. These two electrons must have opposite (antiparallel) spins. If they had the same spin, they would possess the exact same set of four quantum numbers, which is strictly forbidden by this principle.

    To clarify the other options:
    1. Hund's Rule states that for degenerate orbitals (orbitals with the same energy), electrons fill them singly with parallel spins before pairing begins.
    2. The Aufbau Principle describes the order in which electrons fill subshells based on increasing energy levels.
    3. Pauli Exclusion Principle is the specific rule that limits an orbital to two electrons with opposite spins.

    In summary, the Pauli Exclusion Principle dictates that two electrons in the same orbital must have opposite spins to ensure they do not share the same set of quantum numbers.
  27. Q27.

    The magnetic quantum number for the last electron of Na is:

    1. A) 0

    2. B) +/- 1

    3. C) +/- 2

    4. D) +/- 3

    Answer: A

    To find the magnetic quantum number for the last electron of Sodium (Na), we must first determine its electronic configuration. Sodium has an atomic number of 11, which means it has 11 electrons.
    The electronic configuration of Sodium is written as: \[ 1s^{2} 2s^{2} 2p^{6} 3s^{1} \]
    From this configuration, we can identify that the last (11th) electron resides in the 3s orbital.
    To determine the magnetic quantum number (\( m_{l} \)), we look at the quantum numbers associated with the 3s subshell:
    1. Principal Quantum Number (n): This is 3, indicating the third energy level.
    2. Azimuthal Quantum Number (l): This value depends on the shape of the orbital. For any s orbital, the value of l is always 0.
    3. Magnetic Quantum Number (m_{l}): This quantum number describes the orientation of the orbital and ranges from \( -l \) to \( +l \).
    Since the value of l for the last electron is 0, the only possible value for \( m_{l} \) is: \[ m_{l} = 0 \]
    This confirms that the magnetic quantum number for the last electron of Sodium is 0, making option A the correct choice.
    Because the valence electron of sodium is located in an s-orbital where the azimuthal quantum number is zero, the magnetic quantum number is restricted to a value of zero.
  28. Q28.

    Which represents a mole?

    1. A) 6.02x10^23 atoms

    2. B) 24 litres of oxygen gas at RTP

    3. C) 1g atom of Na

    4. D) All of these

    Answer: D

  29. Q29.

    Which one of the following contains maximum number of molecules?

    1. A) 1 mole of CH4

    2. B) 17g of NH3

    3. C) 56g of CO

    4. D) 180g of glucose

    Answer: C

  30. Q30.

    The number of atoms present in 1 mole of H2SO4

    1. A) 7 x Na

    2. B) 8 x Na

    3. C) Na

    4. D) 10 x Na

    Answer: A

  31. Q31.

    A unit which represent 6.023x10^23

    1. A) Mole

    2. B) 1-gram ionic mass

    3. C) 1 gram molecule of nitrogen

    4. D) All of these

    Answer: D

    The number \( 6.023 \times 10^{23} \) is known as Avogadro's number, which defines the quantity of particles found in one mole of any substance. To understand why all the provided options are correct, we must examine how the mole concept is applied to different forms of matter.

    1. Mole (Option A):
    By definition, one mole of any substance (whether it is an element, compound, or subatomic particle) contains exactly \( 6.023 \times 10^{23} \) entities. This is the fundamental unit used in chemistry to express amounts of a chemical substance.

    2. 1-gram ionic mass (Option B):
    The term gram ionic mass refers to the mass of one mole of ions. In chemical terminology, "1 gram ion" or "1-gram ionic mass" is equivalent to one mole of that specific ion. Therefore, it contains \( 6.023 \times 10^{23} \) ions.

    3. 1 gram molecule of nitrogen (Option C):
    The term gram molecule is an older but still scientifically accurate way to refer to one mole of a molecular substance. Thus, 1 gram molecule of nitrogen (\( N_{2} \)) is the same as saying one mole of nitrogen molecules, which contains \( 6.023 \times 10^{23} \) molecules of nitrogen.

    Conclusion:
    Since a mole, a gram ionic mass, and a gram molecule are all different ways of expressing one molar unit of a substance, they all represent the same numerical value of \( 6.023 \times 10^{23} \) particles.

    In summary, all the given options are synonymous with the molar quantity of a substance and therefore represent Avogadro's number.
  32. Q32.

    How many moles of carbon atoms are present in 180g of glucose (C6H12O6)?

    1. A) 6 moles

    2. B) 12 moles

    3. C) Na moles

    4. D) 24 moles

    Answer: A

    To solve this problem, we must first determine how many moles of glucose are present in 180g of the substance.

    Step 1: Calculate the molar mass of glucose (\(C_{6}H_{12}O_{6}\)).
    The molar mass is calculated by adding the atomic masses of all atoms in the chemical formula:
    - Carbon (C): \(6 \times 12 = 72 \text{ g/mol}\)
    - Hydrogen (H): \(12 \times 1 = 12 \text{ g/mol}\)
    - Oxygen (O): \(6 \times 16 = 96 \text{ g/mol}\)
    \[ \text{Total Molar Mass} = 72 + 12 + 96 = 180 \text{ g/mol} \]

    Step 2: Calculate the number of moles of glucose in the given sample.
    We use the relationship between mass, molar mass, and moles:
    \[ \text{Moles} = \frac{\text{Mass}}{\text{Molar Mass}} \]
    \[ \text{Moles of glucose} = \frac{180 \text{ g}}{180 \text{ g/mol}} = 1 \text{ mole} \]

    Step 3: Determine the moles of carbon atoms.
    The subscript in the chemical formula \(C_{6}H_{12}O_{6}\) indicates that there are 6 carbon atoms in every molecule of glucose. Therefore, 1 mole of glucose molecules contains 6 moles of carbon atoms.
    Since our sample consists of exactly 1 mole of glucose, the calculation is:
    \[ 1 \text{ mole of glucose} \times 6 \text{ moles of C / 1 mole of glucose} = 6 \text{ moles of carbon} \]

    Because 180g of glucose is equivalent to one mole, and each mole of glucose contains six moles of carbon, the total amount of carbon present is 6 moles.
  33. Q33.

    How many moles are there in 60g of NaOH?

    1. A) 4 mol

    2. B) 1.5 mol

    3. C) 2 mol

    4. D) 3 mol

    Answer: B

  34. Q34.

    Which of the following have greater number of atoms?

    1. A) 6 moles of S

    2. B) 2.0 moles of S8

    3. C) 5.0 moles of SO2

    4. D) 44.8 dm3 of CO at STP

    Answer: B

  35. Q35.

    18.02g of H2O has:

    1. A) 1 mole of hydrogen atoms

    2. B) 1/2 mole of oxygen atoms

    3. C) 6.022 x 10^23 moles of H2O

    4. D) 6.022 x 10^23 molecules of H2O

    Answer: D

  36. Q36.

    If 15g of sulphur are burnt, what volume of SO2 is produced at STP?

    1. A) 10.5 dm3

    2. B) 20 dm3

    3. C) 30 dm3

    4. D) 100 dm3

    Answer: A

  37. Q37.

    The largest number of molecules are present in:

    1. A) 44g CO2

    2. B) 98g H2SO4

    3. C) 36g H2O

    4. D) 180g C6H12O6

    Answer: C

  38. Q38.

    The relative atomic mass of oxygen is 16 amu. What is the mass of 2 mol of oxygen gas?

    1. A) 64g

    2. B) 32g

    3. C) 100g

    4. D) 71g

    Answer: A

  39. Q39.

    The number of atoms present in 32 amu of oxygen gas:

    1. A) 2

    2. B) 6.023 x 10^23

    3. C) 4

    4. D) 8

    Answer: A

  40. Q40.

    For which one of the following the limiting reagent is not applicable?

    1. A) Irreversible reaction

    2. B) Reversible reaction

    3. C) Exothermic

    4. D) Endothermic

    Answer: B

  41. Q41.

    Which molecule has zero dipole moment but polar bonds?

    1. A) CO2

    2. B) H2O

    3. C) NH3

    4. D) SO2

    Answer: A

  42. Q42.

    Which statement is correct about hybridization in BF3?

    1. A) sp3 hybridization, tetrahedral shape

    2. B) sp2 hybridization, trigonal planar shape

    3. C) sp hybridization, linear shape

    4. D) No hybridization occurs

    Answer: B

  43. Q43.

    Which has maximum bond angle?

    1. A) H2O

    2. B) NH3

    3. C) CH4

    4. D) SO2

    Answer: C

  44. Q44.

    Which is NOT correctly matched?

    1. A) sp3 -> tetrahedral

    2. B) sp2 -> trigonal planar

    3. C) sp -> linear

    4. D) sp3d -> octahedral

    Answer: D

  45. Q45.

    In C2H2 (ethyne), the carbon-carbon bond contains:

    1. A) 1 sigma, 1 pi

    2. B) 1 sigma, 2 pi

    3. C) 2 sigma, 1 pi

    4. D) 2 sigma, 2 pi

    Answer: B