Electrostatics MCQs for MDCAT Physics

48 MCQs with answers and explanations for the Electrostatics chapter. Practice one question at a time, or read the full bank below.
All chapters
Question 1 of 48 Score: 0

All Electrostatics MCQs with answers

48 MCQs for MDCAT Physics. The quiz above checks one question at a time. Every question, option, and saved explanation is on this page.

  1. Q1.

    The SI unit of electric charge is

    1. A) Coulomb

    2. B) Ampere

    3. C) Volt

    4. D) Ohm

    Answer: A

    The Coulomb (symbol: C) is the official SI unit of electric charge, named in honor of the French physicist Charles-Augustin de Coulomb.
    In the International System of Units, electric charge is a derived unit defined in terms of electric current and time. The relationship is expressed by the following formula:
    \[ Q = I \times t \]
    In this formula, \( Q \) represents the electric charge in coulombs, \( I \) represents the current in amperes, and \( t \) represents the time in seconds. Therefore, one coulomb is defined as the amount of charge transported by a constant current of one ampere in one second.
    To distinguish this from the other options provided:
    - Ampere is the SI unit for electric current (the rate of flow of charge).
    - Volt is the SI unit for electric potential difference or electromotive force.
    - Ohm is the SI unit for electrical resistance.
    The Coulomb is the standard measurement for the quantity of electric charge.
  2. Q2.

    The charge on an electron is

    1. A) $1.6\times10^{-19} C$

    2. B) $1.6\times10^{-20} C$

    3. C) $1.6\times10^{-21} C$

    4. D) $1.6\times10^{-22} C$

    Answer: A

  3. Q3.

    The law of conservation of charge states that

    1. A) Charge can be created

    2. B) Charge can be destroyed

    3. C) Charge can be transferred

    4. D) The total charge in an isolated system remains constant

    Answer: D

  4. Q4.

    Coulomb's law states that the force between two point charges is

    1. A) Directly proportional to the product of charges

    2. B) Inversely proportional to the square of the distance

    3. C) Both A and B

    4. D) Neither A nor B

    Answer: C

  5. Q5.

    The value of Coulomb's constant k is

    1. A) $9\times10^{9} N m^{2}/C^{2}$

    2. B) $9\times10^{-9} N m^{2}/C^{2}$

    3. C) $9\times10^{9} N m^{2}/C^{2}$

    4. D) $9\times10^{-9} N m^{2}/C^{2}$

    Answer: A

  6. Q6.

    The electric field intensity is defined as

    1. A) Force per unit charge

    2. B) Force per unit mass

    3. C) Work per unit charge

    4. D) Energy per unit charge

    Answer: A

  7. Q7.

    The SI unit of electric field intensity is

    1. A) N/C

    2. B) V/m

    3. C) Both A and B

    4. D) Neither A nor B

    Answer: C

  8. Q8.

    The electric field due to a point charge q at a distance r is

    1. A) $\frac{kq}{r}$

    2. B) $\frac{kq}{r^{2}}$

    3. C) $\frac{kq}{r^{3}}$

    4. D) $kqr$

    Answer: B

  9. Q9.

    The electric field lines due to a positive point charge are

    1. A) Radially inward

    2. B) Radially outward

    3. C) Parallel

    4. D) Perpendicular

    Answer: B

  10. Q10.

    The electric field lines due to a negative point charge are

    1. A) Radially inward

    2. B) Radially outward

    3. C) Parallel

    4. D) Perpendicular

    Answer: A

  11. Q11.

    The electric potential at a point is defined as

    1. A) Work done per unit charge

    2. B) Force per unit charge

    3. C) Energy per unit charge

    4. D) Both A and C

    Answer: D

  12. Q12.

    The SI unit of electric potential is

    1. A) Volt

    2. B) Joule/Coulomb

    3. C) Both A and B

    4. D) Neither A nor B

    Answer: C

  13. Q13.

    The electric potential due to a point charge q at a distance r is

    1. A) $\frac{kq}{r}$

    2. B) $\frac{kq}{r^{2}}$

    3. C) $\frac{kq}{r^{3}}$

    4. D) $kqr$

    Answer: A

    The electric potential at a point is defined as the amount of work done per unit charge in bringing a positive test charge from infinity to that point in the electric field of a source charge \( q \).
    To understand why Option A is correct, we look at the relationship between the electric field \( E \) and the electric potential \( V \). The electric field produced by a point charge \( q \) at a distance \( r \) is given by the formula: \[ E = \frac{kq}{r^{2}} \]
    The electric potential is the negative integral of the electric field with respect to the distance \( r \). When we integrate the expression for the electric field from infinity to the distance \( r \), we get: \[ V = -\int_{\infty}^{r} \frac{kq}{r^{2}} dr \]
    Solving this integral results in the standard formula for electric potential: \[ V = \frac{kq}{r} \]
    In this formula:
    - V represents the electric potential.
    - k is the electrostatic constant, also written as \( \frac{1}{4\pi\epsilon_{0}} \).
    - q is the magnitude of the point charge.
    - r is the distance from the charge to the point where the potential is being measured.
    It is important to distinguish this from the electric field strength, which follows an inverse-square law (\( 1/r^{2} \)), whereas the electric potential follows an inverse relationship with distance (\( 1/r \)). Therefore, Option A is the mathematically correct choice.
    In summary, the electric potential due to a point charge is determined by the formula \( V = \frac{kq}{r} \).
  14. Q14.

    The electric potential difference between two points is

    1. A) Work done per unit charge

    2. B) Force per unit charge

    3. C) Energy per unit charge

    4. D) Both A and C

    Answer: D

  15. Q15.

    The SI unit of electric potential difference is

    1. A) Volt

    2. B) Joule/Coulomb

    3. C) Both A and B

    4. D) Neither A nor B

    Answer: C

  16. Q16.

    The capacitance of a capacitor is defined as

    1. A) Charge per unit voltage

    2. B) Voltage per unit charge

    3. C) Charge per unit energy

    4. D) Energy per unit charge

    Answer: A

    The concept of capacitance describes the ability of a component, known as a capacitor, to store an electric charge. In physics, the amount of charge \( Q \) that a capacitor can hold is directly proportional to the potential difference \( V \) (voltage) applied across its plates.
    This relationship is defined by the fundamental equation:
    \[ Q = CV \]
    Where:
    \( Q \) is the electric charge measured in Coulombs.
    \( C \) is the capacitance measured in Farads.
    \( V \) is the voltage measured in Volts.
    To define capacitance, we can rearrange this formula to solve for C:
    \[ C = \frac{Q}{V} \]
    From this expression, it is clear that capacitance is the ratio of the charge to the voltage. Therefore, it is formally defined as the charge per unit voltage. This means that a capacitor with a higher capacitance can store more charge for the same amount of applied voltage compared to one with a lower capacitance.
    The unit of measurement for capacitance is the Farad (F), which is equivalent to one Coulomb per Volt (\( 1 \text{ F} = 1 \text{ C/V} \)). Other options, such as voltage per unit charge or energy-related ratios, do not represent the standard physical definition of capacitance.
    In summary, capacitance is the measure of how much electric charge is stored on a capacitor's plates for every one unit of potential difference.
  17. Q17.

    The SI unit of capacitance is

    1. A) Farad

    2. B) Coulomb/Volt

    3. C) Both A and B

    4. D) Neither A nor B

    Answer: C

  18. Q18.

    The capacitance of a parallel plate capacitor is

    1. A) $\frac{\epsilon_{0}A}{d}$

    2. B) $\frac{\epsilon_{0}d}{A}$

    3. C) $\frac{A}{\epsilon_{0}d}$

    4. D) $\frac{d}{\epsilon_{0}A}$

    Answer: A

  19. Q19.

    If the area of the plates of a parallel plate capacitor is doubled, the capacitance becomes

    1. A) Half

    2. B) Double

    3. C) One-fourth

    4. D) Four times

    Answer: B

  20. Q20.

    If the distance between the plates of a parallel plate capacitor is doubled, the capacitance becomes

    1. A) Half

    2. B) Double

    3. C) One-fourth

    4. D) Four times

    Answer: A

  21. Q21.

    The energy stored in a capacitor is

    1. A) $\frac{1}{2}CV^{2}$

    2. B) $\frac{1}{2}QV$

    3. C) $\frac{1}{2}\frac{Q^{2}}{C}$

    4. D) All of these

    Answer: D

  22. Q22.

    If the charge on a capacitor is doubled, the energy stored becomes

    1. A) Half

    2. B) Double

    3. C) One-fourth

    4. D) Four times

    Answer: D

    To determine how the energy stored in a capacitor changes when the charge is doubled, we must look at the relationship between energy, charge, and capacitance.
    The energy stored in a capacitor (\( U \)) is given by the formula: \[ U = \frac{Q^2}{2C} \]
    In this equation:
    - \( U \) represents the potential energy stored in the capacitor.
    - \( Q \) represents the electric charge.
    - \( C \) represents the capacitance, which remains constant for a given capacitor.
    From this formula, it is evident that the energy stored is directly proportional to the square of the charge (\( U \propto Q^2 \)).
    If the charge is doubled, we can represent the new charge as \( Q' = 2Q \). Substituting this new value into the energy equation, we get: \[ U' = \frac{(2Q)^2}{2C} \] \[ U' = \frac{4Q^2}{2C} \]
    By comparing this to the original energy formula (\( U = \frac{Q^2}{2C} \)), we can see that: \[ U' = 4U \]
    This mathematical relationship confirms that when the charge is doubled, the energy stored increases by a factor of four.
    In summary, because the energy stored in a capacitor is proportional to the square of the charge, doubling the charge results in four times the energy.
  23. Q23.

    If the voltage across a capacitor is doubled, the energy stored becomes

    1. A) Half

    2. B) Double

    3. C) One-fourth

    4. D) Four times

    Answer: D

    Okay, let's break down why the correct answer is D) Four times. The energy stored in a capacitor is given by the formula: \[ E = \frac{1}{2}CV^2 \] Where: * `E` is the energy stored * `C` is the capacitance (a property of the capacitor itself - it doesn't change in this problem) * `V` is the voltage across the capacitor
    Now, the question states that the voltage (`V`) is doubled. Let's represent the original voltage as `V₁` and the new voltage as `V₂ = 2V₁`.
    The original energy stored, `E₁`, can be written as: \[ E₁ = \frac{1}{2}CV₁^2 \]
    The new energy stored, `E₂`, with the doubled voltage, is: \[ E₂ = \frac{1}{2}CV₂^2 = \frac{1}{2}C(2V₁)^2 \]
    Let's simplify `E₂`: \[ E₂ = \frac{1}{2}C(4V₁^2) = 4 \cdot \frac{1}{2}CV₁^2 \]
    Notice that `4 * (1/2)CV₁²` is simply `4 * E₁`. Therefore: \[ E₂ = 4E₁ \]
    This shows that the new energy stored (`E₂`) is four times the original energy stored (`E₁`). Since the capacitance `C` remains constant, the only factor affecting the energy is the voltage. Doubling the voltage quadruples the energy.
    Therefore, the correct answer is **D) Four times**.
  24. Q24.

    The dielectric constant of a medium is

    1. A) $\frac{C}{C_{0}}$

    2. B) $\frac{C_{0}}{C}$

    3. C) $\frac{\epsilon}{\epsilon_{0}}$

    4. D) Both A and C

    Answer: D

  25. Q25.

    The dielectric constant of vacuum is

    1. A) 1

    2. B) 0

    3. C) 8

    4. D) -1

    Answer: A

  26. Q26.

    The dielectric constant of air is approximately

    1. A) 1

    2. B) 1.0006

    3. C) 2

    4. D) 3

    Answer: B

  27. Q27.

    The dielectric constant of water is about

    1. A) 80

    2. B) 60

    3. C) 40

    4. D) 20

    Answer: A

  28. Q28.

    The dielectric constant of mica is about

    1. A) 3

    2. B) 5

    3. C) 7

    4. D) 9

    Answer: C

  29. Q29.

    Gauss's law states that the electric flux through a closed surface is equal to

    1. A) $\frac{1}{\epsilon_{0}}$ times the charge enclosed

    2. B) $\epsilon_{0}$ times the charge enclosed

    3. C) $\frac{1}{\epsilon_{0}}$ times the total charge

    4. D) $\epsilon_{0}$ times the total charge

    Answer: A

  30. Q30.

    The electric flux through a closed surface is zero if

    1. A) No charge is enclosed

    2. B) The net charge enclosed is zero

    3. C) Both A and B

    4. D) Neither A nor B

    Answer: C

  31. Q31.

    The electric field due to an infinite plane sheet of charge is

    1. A) $\frac{\sigma}{2\epsilon_{0}}$

    2. B) $\frac{\sigma}{\epsilon_{0}}$

    3. C) $\frac{2\sigma}{\epsilon_{0}}$

    4. D) $\frac{\sigma}{4\epsilon_{0}}$

    Answer: A

  32. Q32.

    The electric field due to an infinite line charge is

    1. A) $\frac{\lambda}{2\pi\epsilon_{0}r}$

    2. B) $\frac{\lambda}{4\pi\epsilon_{0}r}$

    3. C) $\frac{2\lambda}{\pi\epsilon_{0}r}$

    4. D) $\frac{\lambda}{\pi\epsilon_{0}r}$

    Answer: A

    To determine the electric field due to an infinite line charge with a linear charge density \( \lambda \), we apply Gauss's Law.
    Gauss's Law states that the total electric flux through a closed surface is equal to the net charge enclosed by that surface divided by the permittivity of free space \( \epsilon_{0} \). The formula is expressed as:
    \[ \oint \mathbf{E} \cdot d\mathbf{A} = \frac{q_{enclosed}}{\epsilon_{0}} \]
    For an infinite line charge, we choose a cylindrical Gaussian surface of radius \( r \) and length \( L \), centered on the line. Due to the symmetry of the infinite line, the electric field \( E \) must be directed radially outward and its magnitude must be constant at all points on the curved surface of the cylinder.
    The total flux through the Gaussian surface consists of the flux through the curved side and the flux through the two flat end caps:
    1. The electric field lines are parallel to the flat end caps, so the flux through them is zero.
    2. The electric field is perpendicular to the curved surface area, which is \( 2\pi r L \).
    Thus, the total flux \( \Phi \) is:
    \[ \Phi = E \cdot (2\pi r L) \]
    The charge enclosed within this cylinder is the linear charge density multiplied by the length of the cylinder:
    \[ q_{enclosed} = \lambda L \]
    Substituting these values into Gauss's Law, we get:
    \[ E \cdot (2\pi r L) = \frac{\lambda L}{\epsilon_{0}} \]
    To solve for the electric field \( E \), we divide both sides by \( 2\pi r L \):
    \[ E = \frac{\lambda L}{2\pi r L \epsilon_{0}} \]
    The length \( L \) cancels out, leaving the final expression:
    \[ E = \frac{\lambda}{2\pi\epsilon_{0}r} \]
    This matches Option A, showing that the electric field strength is inversely proportional to the distance \( r \) from the line charge.
    In summary, the electric field of an infinite line charge is calculated using Gauss's Law and is defined by the formula \( \frac{\lambda}{2\pi\epsilon_{0}r} \).
  33. Q33.

    The electric field inside a conductor is

    1. A) Zero

    2. B) Constant

    3. C) Proportional to distance

    4. D) Inversely proportional to distance

    Answer: A

    The reason the electric field inside a conductor is zero under electrostatic conditions is due to the behavior of free charges. In a conducting material, such as a metal, electrons are free to move throughout the volume of the substance. If an external electric field were present inside the conductor, it would exert a force \( F = qE \) on these free electrons, causing them to accelerate and move.

    These charges will redistribute themselves along the surface of the conductor almost instantaneously. They move in such a way that they create an internal electric field that perfectly opposes and cancels out any external field. Once the charges reach a state of electrostatic equilibrium, they stop moving because the net force on them has become zero. For the net force to be zero, the net electric field \( E \) inside the conductor must be zero.

    This concept can also be explained using Gauss's Law. Gauss's Law states that the net electric flux through any closed surface is proportional to the enclosed charge: \[ \oint \mathbf{E} \cdot d\mathbf{A} = \frac{Q_{enclosed}}{\epsilon_0} \] In a conductor, all excess charges reside on the outer surface. Therefore, if we imagine a Gaussian surface anywhere inside the material of the conductor, the enclosed charge \( Q_{enclosed} \) is zero. This mathematical relationship confirms that the electric field \( E \) must be zero everywhere inside the conducting material.

    Summary: Under electrostatic equilibrium, the free charges in a conductor redistribute to the outer surface to ensure that the internal electric field is exactly zero.
  34. Q34.

    The electric potential inside a conductor is

    1. A) Zero

    2. B) Constant

    3. C) Proportional to distance

    4. D) Inversely proportional to distance

    Answer: B

    To understand why the electric potential inside a conductor is constant, we must first look at the behavior of the electric field. In a state of electrostatic equilibrium, the electric field \( \vec{E} \) inside a conductor is always zero. This is because the free electrons within the conductor redistribute themselves on the outer surface until they perfectly cancel out any internal electric field.

    The relationship between the electric field and the electric potential \( V \) is mathematically defined by the gradient relationship: \[ \vec{E} = -\nabla V \] In a simpler one-dimensional form, this is expressed as: \[ E = -\frac{dV}{dr} \]
    Since the electric field \( E \) inside the conductor is zero, the equation becomes: \[ 0 = -\frac{dV}{dr} \]
    In calculus, if the derivative of a value with respect to distance is zero, it implies that the value itself is not changing. Therefore, the electric potential \( V \) must be a constant value at every point inside the conductor. This means that the potential at any point in the interior is exactly the same as the potential on the surface of the conductor.

    Summary: Since the electric field inside a conductor is zero, the electric potential does not vary with distance and remains constant throughout the conductor's volume.
  35. Q35.

    The charge on a conductor resides

    1. A) Inside the conductor

    2. B) On the surface

    3. C) Both inside and on the surface

    4. D) Neither inside nor on the surface

    Answer: B

    In a conductor, such as a metal object, the internal charges are free to move throughout the material. When an excess charge is placed on a conductor, the individual charges exert repulsive forces on one another because like charges repel.
    To minimize this mutual repulsion and reach a state of electrostatic equilibrium, the charges move as far away from each other as possible. The maximum distance they can achieve is by migrating to the outermost boundary, which is the surface of the conductor.
    This phenomenon can also be explained through Gauss's Law. In a state of electrostatic equilibrium, the electric field \( E \) inside a conductor is zero. If there were an electric field, the free charges would continue to move until the field was neutralized. According to Gauss's Law:
    \[ \oint \mathbf{E} \cdot d\mathbf{A} = \frac{Q_{enclosed}}{\epsilon_0} \]
    Since the electric field \( E \) is zero everywhere inside the conductor, the net enclosed charge \( Q_{enclosed} \) within any Gaussian surface drawn inside the material must also be zero. Consequently, any excess charge cannot exist inside the body of the conductor and must reside strictly on its outer surface.
    This principle holds true for both solid and hollow conductors, ensuring that the interior remains shielded from external electrostatic influences.
    In summary, excess charge resides on the surface of a conductor because the internal electric field is zero and charges move to the boundary to minimize repulsive forces.
  36. Q36.

    The electric field at the surface of a conductor is

    1. A) Zero

    2. B) $\frac{\sigma}{\epsilon_{0}}$

    3. C) $\frac{\sigma}{2\epsilon_{0}}$

    4. D) $\frac{2\sigma}{\epsilon_{0}}$

    Answer: B

    To determine the electric field at the surface of a conductor, we must consider the behavior of charges in electrostatic equilibrium. In a conductor, charges reside entirely on the outer surface, and the electric field inside the material is zero.

    We can apply Gauss's Law to find the field just outside the surface. Imagine a small cylindrical Gaussian surface, often referred to as a "pillbox," that straddles the surface of the conductor. One flat face of the cylinder lies just inside the conductor, while the other flat face lies just outside.

    The total electric flux \(\Phi\) through this Gaussian surface is calculated based on the following conditions:
    1. The flux through the face inside the conductor is zero because the electric field inside a conductor is zero.
    2. The flux through the side walls of the cylinder is zero because the electric field at the surface of a conductor is always perpendicular to the surface.
    3. The flux through the outer face of area \(A\) is \(E \cdot A\), where \(E\) is the magnitude of the electric field.

    According to Gauss's Law, the total flux is equal to the enclosed charge \(q\) divided by the permittivity of free space \(\epsilon_{0}\): \[ \Phi = \frac{q}{\epsilon_{0}} \] If \(\sigma\) represents the surface charge density (charge per unit area), the charge enclosed by the Gaussian surface is \(q = \sigma \cdot A\). Substituting these values into the Gauss's Law equation gives: \[ E \cdot A = \frac{\sigma \cdot A}{\epsilon_{0}} \] By canceling the area \(A\) from both sides of the equation, we obtain the expression for the electric field: \[ E = \frac{\sigma}{\epsilon_{0}} \]
    This result shows that the electric field just outside the surface of a conductor is directly proportional to the local surface charge density.

    Summary: The electric field at the surface of a conductor is \(\frac{\sigma}{\epsilon_{0}}\) as derived from Gauss's Law, assuming the field inside the conductor is zero and the external field is normal to the surface.
  37. Q37.

    The capacitance of a spherical capacitor is

    1. A) $4\pi\epsilon_{0}\frac{ab}{b-a}$

    2. B) $4\pi\epsilon_{0}\frac{b-a}{ab}$

    3. C) $4\pi\epsilon_{0}(b-a)$

    4. D) $4\pi\epsilon_{0}ab$

    Answer: A

    To understand the capacitance of a spherical capacitor, we consider two concentric conducting spherical shells. Let the inner shell have a radius a and the outer shell have a radius b, where b > a.

    When a charge \( +Q \) is placed on the inner sphere and a charge \( -Q \) is placed on the outer sphere, an electric field is established in the region between them. According to Gauss's Law, the electric field \( E \) at a distance \( r \) (where \( a < r < b \)) from the center is given by:
    \[ E = \frac{Q}{4\pi\epsilon_{0}r^{2}} \]
    The potential difference \( V \) between the two spheres is found by integrating the electric field from the inner radius to the outer radius:
    \[ V = \int_{a}^{b} E \, dr = \int_{a}^{b} \frac{Q}{4\pi\epsilon_{0}r^{2}} \, dr \]
    Evaluating the integral, we get:
    \[ V = \frac{Q}{4\pi\epsilon_{0}} \left[ -\frac{1}{r} \right]_{a}^{b} = \frac{Q}{4\pi\epsilon_{0}} \left( \frac{1}{a} - \frac{1}{b} \right) \]
    By simplifying the expression inside the parentheses, we find:
    \[ V = \frac{Q}{4\pi\epsilon_{0}} \left( \frac{b - a}{ab} \right) \]
    Capacitance \( C \) is defined as the ratio of the magnitude of the charge \( Q \) to the potential difference \( V \):
    \[ C = \frac{Q}{V} = \frac{Q}{\frac{Q}{4\pi\epsilon_{0}} \left( \frac{b - a}{ab} \right)} \]
    After canceling \( Q \) and rearranging the terms, the formula for the capacitance becomes:
    \[ C = 4\pi\epsilon_{0} \frac{ab}{b - a} \]
    This matches Option A, which correctly represents the geometric and physical properties of the spherical capacitor.

    In summary, the capacitance of a spherical capacitor depends on the radii of the two spheres and the permittivity of the medium between them, as expressed by the formula \( 4\pi\epsilon_{0}\frac{ab}{b-a} \).
  38. Q38.

    The capacitance of an isolated sphere of radius R is

    1. A) $4\pi\epsilon_{0}R$

    2. B) $\frac{4\pi\epsilon_{0}}{R}$

    3. C) $\frac{R}{4\pi\epsilon_{0}}$

    4. D) $\frac{1}{4\pi\epsilon_{0}R}$

    Answer: A

  39. Q39.

    The equivalent capacitance of two capacitors in series is

    1. A) $C_{1}+C_{2}$

    2. B) $\frac{C_{1}C_{2}}{C_{1}+C_{2}}$

    3. C) $\frac{C_{1}+C_{2}}{C_{1}C_{2}}$

    4. D) $C_{1}C_{2}$

    Answer: B

    When capacitors are connected in series, the same amount of electric charge \( Q \) accumulates on each capacitor. However, the total potential difference (voltage) across the entire combination is equal to the sum of the potential differences across each individual capacitor. This relationship is expressed as:
    \[ V = V_{1} + V_{2} \]
    Using the fundamental capacitance formula \( Q = CV \), or \( V = \frac{Q}{C} \), we can rewrite the voltage equation in terms of charge and capacitance:
    \[ \frac{Q}{C_{eq}} = \frac{Q}{C_{1}} + \frac{Q}{C_{2}} \]
    Since the charge \( Q \) is identical for both capacitors in series, we can divide the entire equation by \( Q \), which gives us the reciprocal formula for series capacitance:
    \[ \frac{1}{C_{eq}} = \frac{1}{C_{1}} + \frac{1}{C_{2}} \]
    To simplify this expression and solve for \( C_{eq} \), we find a common denominator for the fractions on the right side:
    \[ \frac{1}{C_{eq}} = \frac{C_{2} + C_{1}}{C_{1}C_{2}} \]
    By taking the reciprocal of both sides, we arrive at the final formula for the equivalent capacitance of two capacitors in series:
    \[ C_{eq} = \frac{C_{1}C_{2}}{C_{1} + C_{2}} \]
    This is often referred to as the product-over-sum rule. This result confirms that Option B is the correct mathematical representation.
    In summary, the equivalent capacitance for two capacitors in series is calculated by dividing the product of their capacitances by their sum.
  40. Q40.

    The equivalent capacitance of two capacitors in parallel is

    1. A) $C_{1}+C_{2}$

    2. B) $\frac{C_{1}C_{2}}{C_{1}+C_{2}}$

    3. C) $\frac{C_{1}+C_{2}}{C_{1}C_{2}}$

    4. D) $C_{1}C_{2}$

    Answer: A

  41. Q41.

    If two capacitors of capacitance C each are connected in series, the equivalent capacitance is

    1. A) C

    2. B) 2C

    3. C) C/2

    4. D) 4C

    Answer: C

    Okay, let's break down why the correct answer is C/2 when two capacitors of capacitance *C* are connected in series. Here's the explanation: When capacitors are connected in series, the reciprocal of the equivalent capacitance is equal to the sum of the reciprocals of the individual capacitances. Let's denote the equivalent capacitance as *Ceq*.
    **Formula for Capacitors in Series:** \[ \frac{1}{C_{eq}} = \frac{1}{C_1} + \frac{1}{C_2} \]
    In our case, we have two capacitors, each with capacitance *C*. So, *C1* = *C* and *C2* = *C*. Substituting these values into the formula: \[ \frac{1}{C_{eq}} = \frac{1}{C} + \frac{1}{C} \]
    Now, let's simplify the right side of the equation: \[ \frac{1}{C_{eq}} = \frac{2}{C} \]
    To find *Ceq*, we need to take the reciprocal of both sides of the equation: \[ C_{eq} = \frac{C}{2} \]
    Therefore, the equivalent capacitance of two capacitors, each with capacitance *C*, connected in series is *C/2*. This corresponds to option C.
    **Why other options are incorrect:** * **A) C:** This would be the equivalent capacitance if the capacitors were connected in *parallel*, not series. * **B) 2C:** This is also the capacitance when capacitors are connected in parallel. * **D) 4C:** This is not a standard result for any simple combination of capacitors.
  42. Q42.

    If two capacitors of capacitance C each are connected in parallel, the equivalent capacitance is

    1. A) C

    2. B) 2C

    3. C) C/2

    4. D) 4C

    Answer: B

    When capacitors are connected in parallel, the total or equivalent capacitance is determined by the sum of the individual capacitances. This occurs because connecting capacitors in parallel effectively increases the total surface area of the plates, allowing more electric charge to be stored for a given potential difference.

    The general formula for the equivalent capacitance \( C_{eq} \) of \( n \) capacitors connected in parallel is:
    \[ C_{eq} = C_{1} + C_{2} + ... + C_{n} \]
    In this specific problem, we have two capacitors, and the capacitance of each is given as \( C \). Therefore, we can substitute these values into the formula:
    \[ C_{eq} = C + C \]
    \[ C_{eq} = 2C \]

    This calculation confirms that the equivalent capacitance is 2C, which corresponds to option B. If these capacitors were connected in series instead, the equivalent capacitance would have decreased, but in a parallel arrangement, the capacities simply add up.

    Summary: The equivalent capacitance of two identical capacitors in parallel is the sum of their individual values, which equals \( 2C \).
  43. Q43.

    The force between two charges is F. If the distance between them is doubled, the force becomes

    1. A) F/2

    2. B) F/4

    3. C) 2F

    4. D) 4F

    Answer: B

  44. Q44.

    The force between two charges is F. If the magnitude of each charge is doubled, the force becomes

    1. A) F/2

    2. B) F/4

    3. C) 2F

    4. D) 4F

    Answer: D

  45. Q45.

    The electric potential at a point due to a point charge is V. If the distance is doubled, the potential becomes

    1. A) V/2

    2. B) V/4

    3. C) 2V

    4. D) 4V

    Answer: A

  46. Q46.

    The electric field at a point due to a point charge is E. If the distance is doubled, the field becomes

    1. A) E/2

    2. B) E/4

    3. C) 2E

    4. D) 4E

    Answer: B

  47. Q47.

    The work done in moving a charge between two points in an electric field is independent of the path taken. This is because the electric field is

    1. A) Conservative

    2. B) Non-conservative

    3. C) Uniform

    4. D) Non-uniform

    Answer: A

  48. Q48.

    The electric field and electric potential are related by

    1. A) $E=-\frac{dV}{dr}$

    2. B) $V=-\frac{dE}{dr}$

    3. C) $E=\frac{dV}{dr}$

    4. D) $V=\frac{dE}{dr}$

    Answer: A