FSc Mix Physics MCQs Quiz Online for MDCAT

Mixed-topic Physics bank (45 MCQs) for rapid MDCAT revision — one question at a time with instant checking.
All chapters
Question 1 of 45 Score: 0

All FSc Mix — Physics (all topics) MCQs with answers

45 MCQs for MDCAT Physics. The quiz above checks one question at a time. Every question, option, and saved explanation is on this page.

  1. Q1.

    Which of the following is Force per Unit Area?

    1. A) Work

    2. B) Pressure

    3. C) Volume

    4. D)  Area

    Answer: B

    In physics, the concept of Force per Unit Area is the fundamental definition of Pressure.
    When a force is applied perpendicular to a surface, the pressure exerted on that surface is calculated by dividing the total force by the area over which it is distributed. This relationship is expressed by the following mathematical formula:
    \[ P = \frac{F}{A} \]
    Where:
    \( P \) stands for Pressure.
    \( F \) stands for the Force applied.
    \( A \) stands for the Area of the surface.

    To understand why the other options are not correct, consider their definitions:
    1. Work is the product of force and displacement (\( W = F \times d \)), measured in Joules.
    2. Volume is the amount of three-dimensional space an object occupies, measured in cubic units like \( m^3 \).
    3. Area is the measurement of a two-dimensional surface, measured in square units like \( m^2 \).

    The standard unit for pressure in the International System of Units (SI) is the Pascal (Pa), which is equivalent to one Newton of force applied over one square meter (\( 1 \text{ N/m}^2 \)).

    Pressure is the physical quantity that describes how concentrated a force is over a specific surface area.
  2. Q2.

    Length cannot be measured by:

    1. A)  Fermi

    2. B)  Debye

    3. C)  Micron

    4. D)  Light Year

    Answer: B

    To determine which of the given options cannot be used to measure length, we need to analyze the physical quantity each unit represents.

    1. Fermi:
    A Fermi (also known as a femtometer) is a unit of length used in nuclear physics to measure the size of atomic nuclei and subatomic particles. One Fermi is equal to \( 10^{-15} \) meters. Since it measures distance, it is a unit of length.

    2. Debye:
    The Debye is not a unit of length. It is a non-SI unit used to measure electric dipole moment. It is named after the physicist Peter Debye and is defined such that \( 1 \) Debye is approximately \( 3.33564 \times 10^{-30} \) Coulomb-meters. Because it measures the separation of positive and negative electrical charges rather than simple distance, it cannot be used to measure length.

    3. Micron:
    A micron (or micrometer) is a standard unit of length used to measure microscopic objects, such as bacteria or the thickness of a human hair. One micron is equal to \( 10^{-6} \) meters.

    4. Light Year:
    A light year is a unit of distance (length) representing how far light travels in a vacuum in one Julian year. It is commonly used in astronomy to measure the vast distances between stars and galaxies. One light year is approximately \( 9.46 \times 10^{15} \) meters.

    Based on this analysis, Fermi, Micron, and Light Year are all units of length, whereas the Debye is a unit of electric dipole moment.

    Debye is the correct answer because it is used to measure electric dipole moment rather than length.
  3. Q3.

    The least count is called:

    1. A)  Fractional uncertainty

    2. B)  Absolute uncertainty

    3. C) %age uncertainty

    4. D)  None

    Answer: B

    The least count of a measuring instrument is defined as the smallest value that can be measured accurately using that specific device. In the study of errors and uncertainties, the precision of an instrument is directly linked to its least count.

    The absolute uncertainty in a single measurement is typically taken to be equal to the least count of the instrument used. For example, if a meter rule has a least count of \( 0.1 \text{ cm} \), then any measurement recorded with that rule has an inherent absolute uncertainty of \( \pm 0.1 \text{ cm} \). This value represents the maximum possible error in the measurement due to the limitations of the scale.

    On the other hand, fractional uncertainty is calculated by dividing the absolute uncertainty by the measured value, and percentage uncertainty is the fractional uncertainty multiplied by 100. Because the least count provides the basic "margin of error" in the units of measurement, it is fundamentally referred to as the absolute uncertainty.

    In summary, the least count represents the smallest possible error in a reading and is therefore synonymous with absolute uncertainty.
  4. Q4.

    Identify pairs whore dimensions are equal:

    1. A)  Torque and work

    2. B)  Stress and energy

    3. C)  Force and stress

    4. D)  Force and work

    Answer: A

    To determine which pair has equal dimensions, we must analyze the dimensional formula for each physical quantity mentioned in the options.

    1. Torque and Work (Option A):
    Torque (\( \tau \)) is defined as the product of force and the perpendicular distance from the axis of rotation. Its formula is:
    \[ \text{Torque} = \text{Force} \times \text{Distance} \]
    The dimensional formula for Force is \( [M L T^{-2}] \) and for Distance is \( [L] \). Therefore, the dimensions of Torque are:
    \[ [M L T^{-2}] \times [L] = [M L^2 T^{-2}] \]
    Work (\( W \)) is defined as the product of force and displacement in the direction of the force. Its formula is:
    \[ \text{Work} = \text{Force} \times \text{Displacement} \]
    The dimensional formula for Displacement is also \( [L] \). Therefore, the dimensions of Work are:
    \[ [M L T^{-2}] \times [L] = [M L^2 T^{-2}] \]
    Since both Torque and Work have the same dimensional formula \( [M L^2 T^{-2}] \), this pair has equal dimensions.

    2. Stress and Energy (Option B):
    Stress is defined as Force per unit Area:
    \[ \text{Stress} = \frac{\text{Force}}{\text{Area}} = \frac{[M L T^{-2}]}{[L^2]} = [M L^{-1} T^{-2}] \]
    Energy has the same dimensions as Work, which is \( [M L^2 T^{-2}] \). These dimensions are not equal.

    3. Force and Stress (Option C):
    Force has dimensions \( [M L T^{-2}] \), while Stress has dimensions \( [M L^{-1} T^{-2}] \). These dimensions are not equal.

    4. Force and Work (Option D):
    Force has dimensions \( [M L T^{-2}] \), while Work has dimensions \( [M L^2 T^{-2}] \). These dimensions are not equal.

    Torque and Work have identical dimensions because both quantities are derived from the product of force and length.
  5. Q5.

    Doubling the initial velocity of a projectile while keeping all other parameters the same, the height reached by the projectile increases by:

    1. A)  Two Times

    2. B)  Three Times

    3. C)  Four Times

    4. D)  Remains the same

    Answer: C

    To determine how the maximum height of a projectile changes when the initial velocity is doubled, we must examine the physical relationship between these variables. The formula for the maximum height \( H \) reached by a projectile is given by:
    \[ H = \frac{v_0^2 \sin^2(\theta)}{2g} \]
    In this equation:
    - \( v_0 \) is the initial velocity.
    - \( \theta \) is the angle of projection.
    - \( g \) is the acceleration due to gravity.
    From this formula, it is clear that the maximum height \( H \) is directly proportional to the square of the initial velocity \( v_0 \), assuming the angle of projection and gravity remain constant. This relationship can be written as:
    \[ H \propto v_0^2 \]
    If the initial velocity is doubled, the new velocity becomes \( 2v_0 \). To find the new height \( H' \), we substitute this into our proportionality:
    \[ H' \propto (2v_0)^2 \]
    \[ H' \propto 4v_0^2 \]
    Comparing this to the original height, we see that:
    \[ H' = 4H \]
    This mathematical relationship shows that doubling the velocity results in a fourfold increase in height. This is because the vertical component of the kinetic energy, which determines how high the object can travel against gravity, increases with the square of the speed.
    In summary, because the maximum height is proportional to the square of the initial velocity, doubling the velocity increases the height reached by four times.
  6. Q6.

    A body is moving with momentum of 100 kg m/s. What is the magnitude of force required to stop this body in 25 sec?

    1. A) 4N

    2. B)  25N

    3. C)  100N

    4. D)  2500N

    Answer: A

    To solve this problem, we must apply Newton's Second Law of Motion, which states that the force acting on an object is equal to the rate of change of its momentum over time.

    1. Identify the given information:
    Initial momentum (\( p_{initial} \)) = 100 kg m/s
    Final momentum (\( p_{final} \)) = 0 kg m/s (since the body is brought to a stop)
    Time interval (\( t \)) = 25 seconds

    2. Use the formula for Force:
    The relationship between force and momentum is given by the formula:
    \[ F = \frac{\Delta p}{t} \]
    Where \( \Delta p \) represents the change in momentum (\( p_{final} - p_{initial} \)).

    3. Perform the calculation:
    Substituting the given values into the formula:
    \[ F = \frac{0 - 100}{25} \]
    \[ F = \frac{-100}{25} \]
    \[ F = -4 \text{ N} \]

    The negative sign indicates that the force is a retarding force, meaning it acts in the opposite direction of the motion to slow the body down. Since the question asks for the magnitude of the force, we consider only the numerical value.

    Magnitude of Force = 4 N

    This calculation confirms that Option A is the correct answer.

    By applying the principle of the rate of change of momentum, we determine that a force of 4 N is necessary to bring the body to a complete stop within 25 seconds.
  7. Q7.

    What is the unit of electric charge?

    1. A) Coulomb 

    2. B) Watt

    3. C) Volt

    4. D) Ohm

    Answer: A

  8. Q8.

    Two point charges, each +3µC, are place 2m apart. What is the force between them?

    1. A) 20N

    2. B) 20N

    3. C) 40N

    4. D) 50N

    Answer: C

    To determine the electrostatic force between two point charges, we use Coulomb's Law, which is defined by the following formula:

    \[ F = k \frac{q_1 q_2}{r^2} \]
    Where:
    - \( F \) is the force in Newtons (N).
    - \( k \) is Coulomb's constant, approximately \( 9 \times 10^9 \, N \cdot m^2/C^2 \).
    - \( q_1 \) and \( q_2 \) are the magnitudes of the charges in Coulombs (C).
    - \( r \) is the distance between the charges in meters (m).

    1. Identify and convert the given values:
    The charges are given as \( +3 \mu C \). Since \( 1 \mu C = 10^{-6} C \), we have:
    \( q_1 = 3 \times 10^{-6} C \)
    \( q_2 = 3 \times 10^{-6} C \)
    The distance \( r \) is given as \( 2 m \).

    2. Substitute the values into the equation:
    \[ F = (9 \times 10^9) \frac{(3 \times 10^{-6})(3 \times 10^{-6})}{2^2} \]

    3. Perform the calculation:
    First, calculate the product in the numerator:
    \( (9 \times 10^9) \times (3 \times 10^{-6}) \times (3 \times 10^{-6}) = 9 \times 9 \times 10^{9-6-6} = 81 \times 10^{-3} = 0.081 \)
    Next, calculate the denominator:
    \( 2^2 = 4 \)
    Finally, divide the numerator by the denominator:
    \( F = \frac{0.081}{4} = 0.02025 N \)

    4. Analysis of the result:
    The calculated force is \( 0.02025 N \). While this value is closest to 20 (if adjusted for units like milliNewtons), the provided correct answer is C (40N). This discrepancy often occurs in physics problems if there is a typo in the distance (for example, if the distance were \( \sqrt{2} m \) instead of \( 2 m \)) or if the question intended to ask for the electric potential energy (\( U \)). The potential energy for this system is:
    \[ U = k \frac{q_1 q_2}{r} = \frac{0.081}{2} = 0.0405 J \]
    The numerical magnitude of \( 0.04 \) (or 40 milli-units) matches the value in Option C.

    Coulomb's Law demonstrates that the force is determined by the product of the charges and the inverse square of the distance, resulting here in a force magnitude of approximately \( 0.02 N \).
  9. Q9.

    Electric Field due to a point charge decreases with the square of the distance according to?

    1. A) Inverse Law

    2. B) Inverse Square Law

    3. C) Direct Proportion

    4. D) Constant Value

    Answer: B

  10. Q10.

    If a particle moves from point P (3,4,5) to point Q (4,5,6) then its displacement is ___ unit.

    1. A) sqrt(2)

    2. B) 1

    3. C) sqrt(3)

    4. D) None

    Answer: C

  11. Q11.

    A force of 10N acts on particle along a direction making an angle of 60 degrees with vertical its vertical component is ___.

    1. A) 8.6N

    2. B) 5N

    3. C) 7.07N

    4. D) None

    Answer: B

  12. Q12.

    Vector A makes equal angle with X, Y, Z axis then value of its component (in terms of magnitude of A) is ___.

    1. A) A/sqrt(3)

    2. B) A/sqrt(2)

    3. C) A/2

    4. D) sqrt(3)A

    Answer: A

  13. Q13.

    If A = 3i + 4j and B = 7i + 24j, the vector having the same magnitude as B and parallel to A is ___.

    1. A) 5i + 20j

    2. B) 15i + 10j

    3. C) 20i + 15j

    4. D) 15i + 20j

    Answer: D

    To find a vector that has the same magnitude as vector B and is parallel to vector A, we must first determine the magnitude of B and the direction (unit vector) of A.

    Step 1: Calculate the magnitude of vector B
    The magnitude of a vector \( \vec{B} = x\hat{i} + y\hat{j} \) is calculated using the formula \( \sqrt{x^2 + y^2} \).
    Given \( \vec{B} = 7\hat{i} + 24\hat{j} \): \[ |\vec{B}| = \sqrt{7^2 + 24^2} \] \[ |\vec{B}| = \sqrt{49 + 576} \] \[ |\vec{B}| = \sqrt{625} = 25 \]
    Step 2: Find the unit vector in the direction of A
    A vector parallel to A must share the same unit vector. The unit vector \( \hat{A} \) is found by dividing vector A by its own magnitude.
    First, find the magnitude of \( \vec{A} = 3\hat{i} + 4\hat{j} \): \[ |\vec{A}| = \sqrt{3^2 + 4^2} = \sqrt{9 + 16} = \sqrt{25} = 5 \]
    Now, calculate the unit vector \( \hat{A} \): \[ \hat{A} = \frac{\vec{A}}{|\vec{A}|} = \frac{3\hat{i} + 4\hat{j}}{5} \]
    Step 3: Construct the final vector
    The required vector \( \vec{V} \) is the product of the desired magnitude (from B) and the desired direction (from A): \[ \vec{V} = |\vec{B}| \times \hat{A} \] \[ \vec{V} = 25 \times \left( \frac{3\hat{i} + 4\hat{j}}{5} \right) \]
    Simplifying the expression: \[ \vec{V} = 5 \times (3\hat{i} + 4\hat{j}) \] \[ \vec{V} = 15\hat{i} + 20\hat{j} \]
    This matches Option D.

    Summary: By multiplying the magnitude of vector B (25) by the unit vector of A, we derive the vector 15i + 20j, which satisfies both the magnitude and direction requirements.
  14. Q14.

    If A = B then which one of the following is not correct.

    1. A) A-hat = B-hat

    2. B) |A| = |B|

    3. C) A.B-hat = B.A-hat

    4. D) A + B = A-hat + B-hat

    Answer: D

  15. Q15.

    There are two force vectors one 5N and other of 12N. At what angles the two vectors be added to get resultant of 17N, 7N and 13N respectively.

    1. A) 0, 180 and 90 degrees

    2. B) 0, 90 and 180 degrees

    3. C) 0, 90 and 90 degrees

    4. D) 180, 0, 90 degrees

    Answer: B

  16. Q16.

    A car travelling due north at 20m/s turns west and travels at the same speed. The change in its velocity be.

    1. A) 40m/s N-W

    2. B) 20sqrt(2) N-W

    3. C) 40m/s S-W

    4. D) 20sqrt(2) S-W

    Answer: D

  17. Q17.

    Which one of the following vector makes an angle less than 45 degrees with y-axis is ___.

    1. A) A = i + 3j

    2. B) B = 2i + 1j

    3. C) C = 2i + 2j

    4. D) None

    Answer: A

    To determine the angle \(\theta\) that a vector \(\vec{V} = x\hat{i} + y\hat{j}\) makes with the y-axis, we can use the trigonometric ratio:
    \[ \tan(\theta) = \frac{\text{opposite side}}{\text{adjacent side}} = \frac{x}{y} \]
    For the angle \(\theta\) to be less than 45 degrees, the value of \(\tan(\theta)\) must be less than \(\tan(45^\circ)\). Since \(\tan(45^\circ) = 1\), the condition is:
    \[ \frac{x}{y} < 1 \implies x < y \]
    This means that for a vector to be closer to the y-axis than the x-axis, its y-component must be greater than its x-component.

    Let us evaluate the given options:
    Option A: \(\vec{A} = \hat{i} + 3\hat{j}\)
    Here, \(x = 1\) and \(y = 3\).
    \[ \tan(\theta) = \frac{1}{3} \approx 0.333 \]
    \(\theta = \arctan(0.333) \approx 18.4^\circ\). Since \(18.4^\circ < 45^\circ\), this vector satisfies the condition.

    Option B: \(\vec{B} = 2\hat{i} + \hat{j}\)
    Here, \(x = 2\) and \(y = 1\).
    \[ \tan(\theta) = \frac{2}{1} = 2 \]
    \(\theta = \arctan(2) \approx 63.4^\circ\). This is greater than \(45^\circ\).

    Option C: \(\vec{C} = 2\hat{i} + 2\hat{j}\)
    Here, \(x = 2\) and \(y = 2\).
    \[ \tan(\theta) = \frac{2}{2} = 1 \]
    \(\theta = \arctan(1) = 45^\circ\). This is exactly \(45^\circ\), not less than it.

    Comparing the results, only Vector A has a y-component sufficiently larger than its x-component to result in an angle smaller than 45 degrees relative to the y-axis.

    In conclusion, Vector A makes an angle of approximately 18.4 degrees with the y-axis, which is clearly less than 45 degrees.
  18. Q18.

    A body moves due east with velocity 20km/hr and then due north with velocity 15km/hr the resultant velocity is ___.

    1. A) 15km/hr

    2. B) 5km/hr

    3. C) 20km/hr

    4. D) 25km/hr

    Answer: D

  19. Q19.

    Angle of the vector A = i - j with x-axis ___.

    1. A) 45 degrees

    2. B) 30 degrees

    3. C) 225 degrees

    4. D) 315 degrees

    Answer: D

  20. Q20.

    Rain is vertically downward with velocity of 30m/s, a wind blows from north to south direction with 10m/s then at what angle should the umbrella be held and in which direction.

    1. A) Tan(inverse) 1/3 vertical towards north

    2. B) Tan(inverse) 1/3 vertical towards south

    3. C) Cos(inverse) 1/3 vertical towards north

    4. D) Cos(inverse) 1/3 vertical towards south

    Answer: B

  21. Q21.

    If y-component of a force acting in y-direction is 6N the x-component will be

    1. A) 6N

    2. B) 12N

    3. C) Zero

    4. D) None of these

    Answer: C

  22. Q22.

    If the scalar product of two non-zero vectors A & B is zero, the magnitude of their vector product will be.

    1. A) AB

    2. B) Zero

    3. C) AB sin theta

    4. D) AB cos theta

    Answer: A

  23. Q23.

    The magnitude of resultant of two vectors is 2F. The magnitude of each force is F, the angle between these forces is

    1. A) 0 degrees

    2. B) 90 degrees

    3. C) 120 degrees

    4. D) 180 degrees

    Answer: A

  24. Q24.

    If east, west, north, south, up and down are representing the direction of unit vectors, then east x south has direction along.

    1. A) West

    2. B) North

    3. C) Down

    4. D) Up

    Answer: C

  25. Q25.

    Two vectors A and B are making angle theta with each other. The scalar projection of vector B on vector A is written as.

    1. A) A.B/A

    2. B) A.B/B

    3. C) A cos theta

    4. D) Both a and b are correct

    Answer: D

  26. Q26.

    If A = sqrt(2) B the vector A is ___ to vector B

    1. A) Parallel

    2. B) Perpendicular

    3. C) Anti-Parallel

    4. D) None

    Answer: A

  27. Q27.

    Two vectors of magnitude 6 unit and 8 unit making angle of 30 and 120 with the horizontal then |R| = ______

    1. A) 10

    2. B) 14

    3. C) 2

    4. D) None

    Answer: A

  28. Q28.

    For the triangle of vectors B (base), A (right side from head of B), C (left side from tail of B to top), which relation holds?

    1. A) A = B + C

    2. B) C + A = B

    3. C) C = A + B

    4. D) None

    Answer: C

  29. Q29.

    The magnitude of dot and cross product of two vectors are 6sqrt(3) and 6 respectively the angle between the vectors is ______

    1. A) 60 degrees

    2. B) 30 degrees

    3. C) 45 degrees

    4. D) 90 degrees

    Answer: B

  30. Q30.

    The velocity-time graph of a body in free fall (dropped from rest) is:

    1. A) Horizontal line

    2. B) A straight line sloping up, slope=g

    3. C) A curve

    4. D) A line sloping down

    Answer: B

  31. Q31.

    A student walks 100m in 20s, stands still for 10s, then walks another 100m in 20s. Average speed for the whole trip is:

    1. A) 5m/s

    2. B) 4m/s

    3. C) 10m/s

    4. D) 2m/s

    Answer: B

  32. Q32.

    A stone is dropped from rest. Taking g = 10 m/s^2, its speed after 3s is:

    1. A) 30 m/s

    2. B) 45 m/s

    3. C) 10 m/s

    4. D) 90 m/s

    Answer: A

  33. Q33.

    The force on a body varies with time as a triangle, peaking at 100 N over a total of 0.2 s. The impulse delivered is:

    1. A) 20 N s

    2. B) 10 N s

    3. C) 100 N s

    4. D) 5 N s

    Answer: B

  34. Q34.

    A 2 kg ball moving at 4 m/s strikes a stationary 3 kg ball head-on. Afterwards the 2 kg ball keeps moving forward at 1 m/s. The velocity of the 3 kg ball is:

    1. A) 2 m/s

    2. B) 1 m/s

    3. C) 3 m/s

    4. D) 6 m/s

    Answer: A

    To solve this problem, we use the Law of Conservation of Momentum. This principle states that in a closed system where no external forces are acting, the total momentum before a collision is equal to the total momentum after the collision.

    The formula for momentum is: \[ p = m \times v \] where \( m \) is the mass of the object and \( v \) is its velocity.

    1. Identify the given values:
    Mass of the first ball (\( m_1 \)): 2 kg
    Initial velocity of the first ball (\( u_1 \)): 4 m/s
    Mass of the second ball (\( m_2 \)): 3 kg
    Initial velocity of the second ball (\( u_2 \)): 0 m/s (since it is stationary)
    Final velocity of the first ball (\( v_1 \)): 1 m/s
    Final velocity of the second ball (\( v_2 \)): Unknown

    2. Set up the conservation of momentum equation: \[ m_1 u_1 + m_2 u_2 = m_1 v_1 + m_2 v_2 \]
    3. Substitute the values into the equation: \[ (2 \times 4) + (3 \times 0) = (2 \times 1) + (3 \times v_2) \]
    4. Simplify and solve for \( v_2 \): \[ 8 + 0 = 2 + 3v_2 \] \[ 8 = 2 + 3v_2 \]
    Subtract 2 from both sides of the equation: \[ 6 = 3v_2 \]
    Divide both sides by 3: \[ v_2 = 2 \text{ m/s} \]
    The calculation shows that the 3 kg ball moves forward at a velocity of 2 m/s.

    By applying the principle of conservation of momentum, we find that the final velocity of the 3 kg ball is 2 m/s.
  35. Q35.

    Newton 3rd law of motion is for bodies that are

    1. A) In motion

    2. B) At rest

    3. C) Both A & B

    4. D) None of these

    Answer: C

  36. Q36.

    When a car moves with constant velocity the net force on it is.

    1. A) Up

    2. B) Down

    3. C) Left

    4. D) Zero

    Answer: D

  37. Q37.

    A body of mass 0.5kg starts from rest (at t=0) and experiences a force F = 8i + 6j. What will be its velocity at t=1?

    1. A) 13 m/s

    2. B) 20 m/s

    3. C) 17 m/s

    4. D) 25 m/s

    Answer: B

    To find the velocity of the body at \( t = 1 \) second, we must first determine the acceleration produced by the given force using Newton's Second Law of Motion.

    Step 1: Calculate the acceleration vector
    Newton's Second Law states that force is the product of mass and acceleration: \[ \vec{F} = m\vec{a} \] Given:
    Force \( \vec{F} = 8\hat{i} + 6\hat{j} \)
    Mass \( m = 0.5 \) kg
    We can find the acceleration (\( \vec{a} \)) by rearranging the formula: \[ \vec{a} = \frac{\vec{F}}{m} = \frac{8\hat{i} + 6\hat{j}}{0.5} \] Dividing by 0.5 is the same as multiplying by 2, so: \[ \vec{a} = 16\hat{i} + 12\hat{j} \text{ m/s}^2 \]
    Step 2: Calculate the velocity vector at \( t = 1 \)
    The body starts from rest, which means the initial velocity \( \vec{u} = 0 \). Using the first equation of motion for constant acceleration: \[ \vec{v} = \vec{u} + \vec{a}t \] Substituting the values for \( \vec{u} \), \( \vec{a} \), and \( t = 1 \): \[ \vec{v} = 0 + (16\hat{i} + 12\hat{j}) \times 1 \] \[ \vec{v} = 16\hat{i} + 12\hat{j} \text{ m/s} \]
    Step 3: Determine the magnitude of the velocity
    The options provided are scalar values, so we need to find the magnitude (speed) of the velocity vector. The magnitude of a vector \( \vec{v} = x\hat{i} + y\hat{j} \) is given by: \[ |\vec{v}| = \sqrt{x^2 + y^2} \] Substituting our components: \[ |\vec{v}| = \sqrt{16^2 + 12^2} \] \[ |\vec{v}| = \sqrt{256 + 144} \] \[ |\vec{v}| = \sqrt{400} \] \[ |\vec{v}| = 20 \text{ m/s} \]
    The magnitude of the velocity at \( t = 1 \) is 20 m/s, which matches option B.

    By calculating the acceleration from the force and mass, and then applying the equation of motion, we find that the body reaches a speed of 20 m/s after one second.
  38. Q38.

    If force of 2.5N changes the velocity from 50m/s to 100m/s in time 50sec, the mass of the body?

    1. A) 5kg

    2. B) 2.5kg

    3. C) 1kg

    4. D) 10kg

    Answer: B

    To determine the mass of the body, we must first identify the given physical quantities and apply the principles of classical mechanics.

    1. Identify the given values:
    Force (F) = \( 2.5 \text{ N} \)
    Initial velocity (u) = \( 50 \text{ m/s} \)
    Final velocity (v) = \( 100 \text{ m/s} \)
    Time (t) = \( 50 \text{ s} \)

    2. Calculate the acceleration:
    Acceleration (\( a \)) is the rate of change of velocity over time. It is calculated using the formula: \[ a = \frac{v - u}{t} \] Substituting the given values into the formula: \[ a = \frac{100 - 50}{50} \] \[ a = \frac{50}{50} = 1 \text{ m/s}^{2} \]
    3. Calculate the mass using Newton's Second Law:
    Newton's Second Law of Motion states that the force acting on an object is equal to the mass of that object multiplied by its acceleration: \[ F = m \times a \] To find the mass (m), we rearrange the formula: \[ m = \frac{F}{a} \] Now, substitute the values for force and acceleration: \[ m = \frac{2.5}{1} \] \[ m = 2.5 \text{ kg} \]
    Based on these calculations, the mass of the body is 2.5 kg, which matches Option B.

    By first determining the acceleration and then applying Newton's Second Law, we find that the body has a mass of 2.5 kg.
  39. Q39.

    A body of mass m1 moving with 8m/s and another mass m2 moving 5m/s along the same direction. Speed of the colliding bodies after collision may be

    1. A) 2m/s and 6m/s

    2. B) 3m/s and 4m/s

    3. C) 10m/s and 11m/s

    4. D) 6m/s and 9m/s

    Answer: D

  40. Q40.

    A ball is thrown vertically upward with a velocity of 10 m/s. How high did the ball rise?

    1. A) 9.8m

    2. B) 5.1m

    3. C) 17m

    4. D) None

    Answer: B

  41. Q41.

    Two blocks of 1kg and 3kg are placed in contact and acted upon by a force 80N. The acceleration in 1kg mass will be.

    1. A) 10 m/s^2

    2. B) 20 m/s^2

    3. C) 80 m/s^2

    4. D) None

    Answer: B

  42. Q42.

    If 20N force is applied on 1 kg body at 60 degrees and friction of 6N is exerted in opposite direction. Then acceleration in the body is ____.

    1. A) 4 m/s^2

    2. B) 10 m/s^2

    3. C) 5 m/s^2

    4. D) 14 m/s^2

    Answer: A

    To find the acceleration of the body, we must first determine the net force acting on it in the direction of motion.

    Step 1: Resolve the applied force into its horizontal component.
    When a force is applied at an angle, only the component of the force acting along the surface (horizontally) contributes to the forward acceleration. This is calculated using the cosine of the angle:
    \[ F_{horizontal} = F \cdot \cos(\theta) \]
    Given:
    Applied Force \( (F) = 20 \text{ N} \)
    Angle \( (\theta) = 60^\circ \)
    We know that \( \cos(60^\circ) = 0.5 \).
    Substituting these values:
    \[ F_{horizontal} = 20 \text{ N} \cdot 0.5 = 10 \text{ N} \]

    Step 2: Calculate the net force acting on the body.
    The net force \( (F_{net}) \) is the difference between the forward horizontal force and the frictional force acting in the opposite direction:
    \[ F_{net} = F_{horizontal} - \text{Friction} \]
    Given:
    Friction \( = 6 \text{ N} \)
    \[ F_{net} = 10 \text{ N} - 6 \text{ N} = 4 \text{ N} \]

    Step 3: Apply Newton's Second Law of Motion.
    Newton's Second Law states that force equals mass times acceleration \( (F = m \cdot a) \). To find acceleration \( (a) \), we rearrange the formula:
    \[ a = \frac{F_{net}}{m} \]
    Given:
    Mass \( (m) = 1 \text{ kg} \)
    Substituting the values:
    \[ a = \frac{4 \text{ N}}{1 \text{ kg}} = 4 \text{ m/s}^2 \]
    The calculated acceleration is 4 m/s², which corresponds to option A.

    Summary: By resolving the applied force into its horizontal component of 10N and subtracting the 6N of friction, we obtain a net force of 4N, which produces an acceleration of 4 m/s² on a 1 kg mass.
  43. Q43.

    If the initial velocity of a body is 20m/s and its acceleration is 3 m/s^2. Then distance covered by the body in 3rd second is ______.

    1. A) 20m

    2. B) 13.5m

    3. C) 27.5m

    4. D) None

    Answer: C

  44. Q44.

    A ball with original momentum of 6.0 kg m/s hits a wall and bounces straight back without losing any kinetic energy. Then change in the momentum of the ball is ______.

    1. A) 6.0 N.s

    2. B) 12 N.s

    3. C) 0 N.s

    4. D) -12 N.s

    Answer: B

    To understand the change in momentum, we must first recognize that momentum is a vector quantity, meaning it has both magnitude and direction.

    1. Initial Momentum:
    Let the initial momentum of the ball moving toward the wall be \( p_{initial} = 6.0 \) kg m/s. For this calculation, we will define the direction toward the wall as the positive direction.

    2. Final Momentum:
    The problem states that the ball bounces back without losing any kinetic energy. This implies an elastic collision where the speed of the ball remains the same. Since the mass of the ball is constant and the speed is unchanged, the magnitude of the momentum remains 6.0 kg m/s. However, because the ball bounces "straight back," its direction is reversed. Therefore, the final momentum is \( p_{final} = -6.0 \) kg m/s.

    3. Calculating the Change in Momentum:
    The change in momentum (\( \Delta p \)) is calculated by subtracting the initial momentum from the final momentum:
    \[ \Delta p = p_{final} - p_{initial} \]
    Substituting our values into the formula:
    \[ \Delta p = -6.0 \text{ kg m/s} - 6.0 \text{ kg m/s} = -12.0 \text{ kg m/s} \]

    4. Interpreting the Result:
    The unit kg m/s is equivalent to Newton-seconds (N.s). The magnitude of the change is 12 N.s. The negative sign simply indicates that the direction of the momentum change is opposite to the initial direction of travel. Among the given choices, 12 N.s represents the correct magnitude of this change.

    Because the ball reverses direction with the same speed, the total change in momentum is twice the magnitude of the initial momentum, resulting in 12 N.s.
  45. Q45.

    Acceleration of projectile at the summit point is ______ m/s^2

    1. A) 0

    2. B) 9.8

    3. C) -9.8

    4. D) None

    Answer: B