190 MCQs for MDCAT Physics. The quiz above checks one question at a time. Every question, option, and saved explanation is on this page.
-
Q1.
Angular displacement is measured in:
A) radian
B) degree per second
C) meter
D) newton
Answer: A
Okay, let's break down why the correct answer is A) radian.
Here's the explanation:
Angular displacement refers to the change in angle of an object. It's how much an object has rotated. Think of a spinning wheel – angular displacement tells you how far the wheel has turned, but in terms of an angle, not a distance.
Now, let's look at the units.
* **Radian (A):** A radian is a standard unit for measuring angles, particularly in contexts involving rotations and circular motion. It's defined as the angle subtended at the center of a circle by an arc equal in length to the radius of the circle. Radians are fundamentally linked to the geometry of circles and are often used in physics and mathematics because they simplify many formulas.
* **Degree per second (B):** This unit represents *angular velocity*, which is the *rate* of change of angular displacement (how fast something is rotating). It's not the displacement itself.
* **Meter (C):** A meter is a unit of *linear* distance, not angular measurement. It tells you how far something has moved in a straight line.
* **Newton (D):** A newton is a unit of force. It has nothing to do with angles or rotations.
**Therefore, angular displacement is inherently an angular quantity, and the standard unit for measuring angles, including angular displacement, is the radian.**
**Example (Illustrative, not a calculation):**
Imagine a rotating fan blade.
* If the blade completes one full rotation, its angular displacement is 2π radians (or 360 degrees).
* If the blade rotates 1.5 times, its angular displacement is 3π radians (or 540 degrees).
\[
\text{Angular Displacement} = \theta
\]
Where θ (theta) is typically measured in radians.
-
Q2.
Angular velocity is:
A) rate of change of angular displacement
B) rate of change of linear velocity
C) angular displacement per unit arc length
D) torque per unit time
Answer: A
-
Q3.
$\omega$ has SI unit:
A) $\text{rad s}^{-1}$
B) $\text{rad}$
C) $\text{m s}^{-1}$
D) $\text{s}$
Answer: A
-
Q4.
Angular acceleration is:
A) $\alpha=\dfrac{d\omega}{dt}$
B) $\alpha=\dfrac{d\theta}{dt}$
C) $\alpha=\dfrac{dv}{dt}$
D) $\alpha=\omega\theta$
Answer: A
-
Q5.
Relation between linear and angular velocity:
A) $v=r\omega$
B) $v=\dfrac{\omega}{r}$
C) $v=\omega r^{2}$
D) $v=\dfrac{r}{\omega}$
Answer: A
-
Q6.
Centripetal acceleration magnitude is:
A) $a_{c}=\dfrac{v^{2}}{r}=r\omega^{2}$
B) $a_{c}=vr$
C) $a_{c}=\dfrac{r}{v^{2}}$
D) $a_{c}=\omega/v$
Answer: A
-
Q7.
Centripetal force on a mass $m$ moving with speed $v$ in radius $r$:
A) $F=\dfrac{mv^{2}}{r}$
B) $F=\dfrac{mr^{2}}{v}$
C) $F=\dfrac{rv}{m}$
D) $F=\dfrac{m}{rv^{2}}$
Answer: A
-
Q8.
Torque of a force $\vec F$ about point with position $\vec r$:
A) $\vec\tau=\vec r\times\vec F$
B) $\vec\tau=\vec F\times\vec r$
C) $\tau=rF\cos\theta$
D) $\tau=F/r$
Answer: A
-
Q9.
Magnitude of torque is:
A) $\tau=rF\sin\theta$
B) $\tau=rF\cos\theta$
C) $\tau=\dfrac{F}{r}$
D) $\tau=r/F$
Answer: A
-
Q10.
Work in rotational motion:
A) $W=\tau\,\theta$ (for constant $\tau$)
B) $W=\omega\,\tau$
C) $W=\alpha\,\theta$
D) $W=I\,\theta$
Answer: A
-
Q11.
Power in rotational motion:
A) $P=\tau\,\omega$
B) $P=\dfrac{\tau}{\omega}$
C) $P=I\alpha$
D) $P=\omega/\tau$
Answer: A
-
Q12.
Rotational analog of $F=ma$:
A) $\tau=I\alpha$
B) $\tau=I\omega$
C) $\tau=\alpha/I$
D) $\tau=mv$
Answer: A
-
Q13.
Moment of inertia of a point mass $m$ at distance $r$:
A) $I=mr^{2}$
B) $I=\dfrac{m}{r^{2}}$
C) $I=\dfrac{r^{2}}{m}$
D) $I=mr$
Answer: A
-
Q14.
$I$ of a thin ring (hoop) of mass $M$ and radius $R$ about its axis:
A) $I=MR^{2}$
B) $I=\tfrac12 MR^{2}$
C) $I=\tfrac25 MR^{2}$
D) $I=\tfrac13 MR^{2}$
Answer: A
-
Q15.
$I$ of a solid disc (about central axis):
A) $I=\tfrac12 MR^{2}$
B) $I=MR^{2}$
C) $I=\tfrac25 MR^{2}$
D) $I=\tfrac13 MR^{2}$
Answer: A
-
Q16.
$I$ of a solid sphere (about diameter):
A) $I=\tfrac25 MR^{2}$
B) $I=\tfrac12 MR^{2}$
C) $I=MR^{2}$
D) $I=\tfrac23 MR^{2}$
Answer: A
-
Q17.
$I$ of a thin rod of length $L$ about center and perpendicular to length:
A) $I=\tfrac{1}{12}ML^{2}$
B) $I=\tfrac{1}{3}ML^{2}$
C) $I=\tfrac12 ML^{2}$
D) $I=ML^{2}$
Answer: A
To determine the moment of inertia (I) of a thin rod of mass M and length L about an axis passing through its center and perpendicular to its length, we apply the definition of the moment of inertia for a continuous distribution of mass.
First, we define the linear mass density, λ, which represents the mass per unit length of the rod:
\[ \lambda = \frac{M}{L} \]
Next, we consider a small element of the rod with a tiny length \( dx \) located at a distance \( x \) from the center. The mass of this small element, \( dm \), is calculated as:
\[ dm = \lambda dx = \frac{M}{L} dx \]
The general formula for the moment of inertia is the integral of the square of the distance from the axis multiplied by the mass element:
\[ I = \int x^2 dm \]
Because the axis is located at the center of the rod, the rod extends from \( -\frac{L}{2} \) to \( \frac{L}{2} \). We set up the integral with these limits:
\[ I = \int_{-L/2}^{L/2} x^2 \left( \frac{M}{L} \right) dx \]
We can pull the constant terms \( \frac{M}{L} \) out of the integral:
\[ I = \frac{M}{L} \int_{-L/2}^{L/2} x^2 dx \]
Integrating \( x^2 \) with respect to \( x \) gives \( \frac{x^3}{3} \). Applying the limits of integration, we get:
\[ I = \frac{M}{L} \left[ \frac{x^3}{3} \right]_{-L/2}^{L/2} \]
\[ I = \frac{M}{L} \left( \frac{(\frac{L}{2})^3}{3} - \frac{(-\frac{L}{2})^3}{3} \right) \]
\[ I = \frac{M}{L} \left( \frac{L^3/8}{3} - \frac{-L^3/8}{3} \right) \]
\[ I = \frac{M}{L} \left( \frac{L^3}{24} + \frac{L^3}{24} \right) \]
\[ I = \frac{M}{L} \left( \frac{2L^3}{24} \right) = \frac{M}{L} \left( \frac{L^3}{12} \right) \]
\[ I = \frac{1}{12}ML^2 \]
This mathematical derivation shows that the correct expression is \( \frac{1}{12}ML^2 \), which corresponds to Option A. For comparison, Option B (\( \frac{1}{3}ML^2 \)) represents the moment of inertia if the axis were at one end of the rod.
In summary, the moment of inertia for a thin rod rotated about its center is calculated as one-twelfth of the mass times the square of the length.
-
Q18.
$I$ of the same rod about one end (perp. to length):
A) $I=\tfrac{1}{3}ML^{2}$
B) $I=\tfrac{1}{12}ML^{2}$
C) $I=\tfrac12 ML^{2}$
D) $I=ML^{2}$
Answer: A
-
Q19.
Parallel axis theorem:
A) $I=I_{\text{cm}}+Md^{2}$
B) $I=I_{\text{cm}}-Md^{2}$
C) $I=I_{\text{cm}}/Md^{2}$
D) $I=Md^{2}$
Answer: A
Okay, let's break down the Parallel Axis Theorem and why option A is the correct answer.
The Parallel Axis Theorem is a fundamental concept in rotational mechanics. It helps us calculate the moment of inertia of a rigid body about *any* axis, provided we know its moment of inertia about a parallel axis passing through its center of mass (CM).
Here's the core idea: If you shift the axis of rotation slightly, the moment of inertia changes. The Parallel Axis Theorem quantifies this change.
**The Formula**
The Parallel Axis Theorem is expressed mathematically as:
\[
I = I_{\text{cm}} + Md^2
\]
Let's understand what each term means:
* $I$: This is the moment of inertia about the *new* axis of rotation (the one we're interested in).
* $I_{\text{cm}}$: This is the moment of inertia about a parallel axis that *passes through the center of mass* of the object. This is often easier to calculate or is given in a problem.
* $M$: This is the total mass of the object.
* $d$: This is the perpendicular distance between the new axis of rotation and the parallel axis passing through the center of mass. It's crucial that this distance is *perpendicular*.
**Why the other options are incorrect:**
* **B) $I=I_{\text{cm}}-Md^{2}$:** The theorem *adds* $Md^2$, not subtracts it. Subtracting would imply a decrease in moment of inertia when moving the axis away from the center of mass, which isn't generally true.
* **C) $I=I_{\text{cm}}/Md^{2}$:** This is not the correct relationship. It involves division, which isn't part of the theorem.
* **D) $I=Md^{2}$:** This formula only accounts for the term $Md^2$ and ignores the contribution from the moment of inertia about the center of mass, $I_{\text{cm}}$. It's incomplete.
**In summary:** The Parallel Axis Theorem states that the moment of inertia about any axis is equal to the moment of inertia about a parallel axis through the center of mass, plus the product of the mass and the square of the distance between the two axes. Therefore, option A is the correct representation of the theorem.
-
Q20.
Perpendicular axis theorem (plane lamina):
A) $I_{z}=I_{x}+I_{y}$
B) $I_{z}=I_{x}-I_{y}$
C) $I_{z}=I_{x}I_{y}$
D) $I_{z}=\dfrac{I_{x}}{I_{y}}$
Answer: A
-
Q21.
Angular momentum for rigid body:
A) $L=I\omega$
B) $L=I\alpha$
C) $L=\tau\omega$
D) $L=\dfrac{I}{\omega}$
Answer: A
-
Q22.
For a particle, angular momentum is:
A) $\vec L=\vec r\times\vec p$
B) $\vec L=\vec p\times\vec r$
C) $\vec L=\vec r\cdot\vec p$
D) $\vec L=\vec p/\vec r$
Answer: A
-
Q23.
Torque–angular momentum relation:
A) $\vec\tau=\dfrac{d\vec L}{dt}$
B) $\vec\tau=\vec L\,dt$
C) $\vec\tau=\vec L/t$
D) $\vec\tau=\vec L$
Answer: A
Okay, let's break down why option A, $\vec{\tau} = \dfrac{d\vec{L}}{dt}$, is the correct answer for the torque-angular momentum relation.
Here's the explanation:
The fundamental relationship between torque and angular momentum is a direct analogy to the relationship between force and linear momentum. Let's recall the familiar force-momentum relationship:
\[
\vec{F} = \dfrac{d\vec{p}}{dt}
\]
Where:
* $\vec{F}$ is the net force acting on an object.
* $\vec{p}$ is the linear momentum of the object.
* $t$ is time.
* $\dfrac{d\vec{p}}{dt}$ represents the rate of change of linear momentum with respect to time.
Now, let's translate this to rotational motion. We replace:
* Force ($\vec{F}$) with Torque ($\vec{\tau}$) - Torque is the rotational equivalent of force.
* Linear momentum ($\vec{p}$) with Angular momentum ($\vec{L}$) - Angular momentum is the rotational equivalent of linear momentum.
This gives us the torque-angular momentum relation:
\[
\vec{\tau} = \dfrac{d\vec{L}}{dt}
\]
Where:
* $\vec{\tau}$ is the net torque acting on an object.
* $\vec{L}$ is the angular momentum of the object.
* $t$ is time.
* $\dfrac{d\vec{L}}{dt}$ represents the rate of change of angular momentum with respect to time.
**In simpler terms:** Torque is the rate at which angular momentum changes. If you apply a torque to an object, its angular momentum will change over time. If the torque is zero, the angular momentum remains constant.
**Why the other options are incorrect:**
* **B) $\vec{\tau} = \vec{L}\,dt$:** This equation is dimensionally incorrect. Torque is a rate of change, not a product of angular momentum and time.
* **C) $\vec{\tau} = \vec{L}/t$:** Again, this is dimensionally incorrect and doesn't represent the relationship.
* **D) $\vec{\tau} = \vec{L}$:** This implies that torque is equal to angular momentum, which is not generally true. Torque *changes* angular momentum, it isn't equal to it.
Therefore, option A, $\vec{\tau} = \dfrac{d\vec{L}}{dt}$, correctly expresses the torque-angular momentum relation. It's a crucial concept in rotational dynamics!
-
Q24.
Kinetic energy of rotation:
A) $K_{rot}=\tfrac12 I\omega^{2}$
B) $K_{rot}=I\omega$
C) $K_{rot}=\tfrac12 m\omega^{2}$
D) $K_{rot}=\tfrac12 I\alpha^{2}$
Answer: A
-
Q25.
Rolling without slipping condition:
A) $v=R\omega$
B) $v=\dfrac{\omega}{R}$
C) $v=R/\omega$
D) $v=R^{2}\omega$
Answer: A
-
Q26.
Total kinetic energy for rolling body:
A) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
B) $\tfrac12 I\omega^{2}$
C) $\tfrac12 mv^{2}$
D) $I\omega$
Answer: A
-
Q27.
Unit of torque is:
A) $\text{N m}$
B) $\text{J s}^{-1}$
C) $\text{N s}$
D) $\text{J}$
Answer: A
-
Q28.
Precession in absence of external torque:
A) angular momentum conserved
B) energy not conserved
C) angular momentum not defined
D) torque equals angular momentum
Answer: A
-
Q29.
For uniform circular motion, speed is:
A) constant, acceleration towards center
B) constant, acceleration zero
C) increasing, acceleration outward
D) constant, acceleration outward
Answer: A
-
Q30.
Period of rotation is:
A) $T=\dfrac{2\pi}{\omega}$
B) $T=2\pi\omega$
C) $T=\omega/2\pi$
D) $T=2\pi v$
Answer: A
-
Q31.
Frequency is:
A) $f=\dfrac{\omega}{2\pi}$
B) $f=2\pi\omega$
C) $f=\dfrac{2\pi}{\omega}$
D) $f=\omega v$
Answer: A
-
Q32.
Banking of a curve avoids reliance on:
A) friction
B) gravity
C) normal reaction
D) centripetal force
Answer: A
-
Q33.
For bank angle $\phi$, ideal speed $v$ (no friction):
A) $v=\sqrt{rg\tan\phi}$
B) $v=\sqrt{gr\tan\phi}$
C) $v=\sqrt{g/\tan\phi}$
D) $v=\sqrt{r/g}$
Answer: A
-
Q34.
Conical pendulum tension provides:
A) centripetal component
B) tangential component only
C) no radial component
D) weightless support
Answer: A
-
Q35.
Radial component of acceleration in circular motion:
A) $a_{r}=\dfrac{v^{2}}{r}$
B) $a_{r}=v^{2}r$
C) $a_{r}=\dfrac{r}{v^{2}}$
D) $a_{r}=vr$
Answer: A
-
Q36.
Tangential acceleration is:
A) $a_{t}=r\alpha$
B) $a_{t}=\dfrac{\alpha}{r}$
C) $a_{t}=\dfrac{r}{\alpha}$
D) $a_{t}=r\omega$
Answer: A
-
Q37.
For disc rolling without slipping down incline, acceleration is:
A) $a=\dfrac{g\sin\theta}{1+\tfrac{I}{mR^{2}}}$
B) $a=g\sin\theta$
C) $a=\dfrac{g\sin\theta}{2}$
D) $a=\dfrac{g\cos\theta}{1+I/mR^{2}}$
Answer: A
-
Q38.
Gyroscope resists change in:
A) axis of rotation
B) mass
C) speed of light
D) inertia of translation
Answer: A
-
Q39.
Static friction for rolling without slipping does:
A) no work at point of contact (ideal rigid surface)
B) positive work
C) negative work
D) always zero force
Answer: A
-
Q40.
If external torque is zero, then:
A) $\Delta\vec L=0$
B) $\Delta K=0$
C) $\Delta \omega=0$
D) $\Delta \theta=0$
Answer: A
-
Q41.
Unit of angular momentum:
A) $\text{kg m}^{2}\text{s}^{-1}$
B) $\text{kg m s}^{-1}$
C) $\text{N m}$
D) $\text{J}$
Answer: A
-
Q42.
S.I. unit of moment of inertia:
A) $\text{kg m}^{2}$
B) $\text{kg m}$
C) $\text{kg m}^{-2}$
D) $\text{kg s}^{2}$
Answer: A
-
Q43.
Dimension of torque is same as:
A) work/energy
B) power
C) momentum
D) pressure
Answer: A
-
Q44.
But torque is different from work because:
A) it is an axial (pseudovector)
B) it has different unit
C) it is scalar
D) it is dimensionless
Answer: A
-
Q45.
Angular impulse equals change in:
A) angular momentum
B) kinetic energy
C) torque
D) moment of inertia
Answer: A
-
Q46.
$\omega$–$\alpha$ relation in constant angular acceleration:
A) $\omega^{2}=\omega_{0}^{2}+2\alpha\theta$
B) $\omega=\omega_{0}+\alpha\theta$
C) $\omega^{2}=\omega_{0}\alpha\theta$
D) $\omega=\alpha/\theta$
Answer: A
-
Q47.
Rotational kinematic equation:
A) $\theta=\omega_{0}t+\tfrac12\alpha t^{2}$
B) $\theta=\omega t^{2}$
C) $\theta=\tfrac12\omega t$
D) $\theta=\alpha/t$
Answer: A
-
Q48.
Tangential speed of a point on rim:
A) $v=\omega R$
B) $v=\alpha R$
C) $v=\dfrac{R}{\omega}$
D) $v=\dfrac{\omega}{R}$
Answer: A
-
Q49.
For a wheel with $I$ and $\alpha$, net torque is:
A) $\tau=I\alpha$
B) $\tau=I\omega$
C) $\tau=I\theta$
D) $\tau=\alpha/I$
Answer: A
-
Q50.
If $L=I\omega$ and $I$ decreases without external torque:
A) $\omega$ increases
B) $\omega$ decreases
C) $\omega$ unchanged
D) $L$ decreases
Answer: A
-
Q51.
$I$ of a rectangular plate about axis through center & perpendicular:
A) $I=\tfrac{1}{12}M(a^{2}+b^{2})$
B) $I=\tfrac12 M(a^{2}+b^{2})$
C) $I=\tfrac{1}{3}M(a^{2}+b^{2})$
D) $I=Mab$
Answer: A
-
Q52.
For a particle in UCM, direction of $\vec a$ is:
A) toward center
B) away from center
C) along velocity
D) random
Answer: A
-
Q53.
If string breaks in UCM, the object moves:
A) tangentially
B) radially outward
C) toward center
D) stops
Answer: A
-
Q54.
Unit of radian:
A) dimensionless
B) radian
C) steradian
D) meter
Answer: A
-
Q55.
Choose the correct set of analogies:
A) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
B) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
C) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
D) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
Answer: B
-
Q56.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=I\omega$
B) $W=\tau\,\theta$
C) $W=\alpha\theta$
D) $W=\tau/\theta$
Answer: B
-
Q57.
A mass $m=4\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=6\,\text{m s}^{-1}$. The required centripetal force is:
A) $mvr$
B) $\dfrac{v}{mr}$
C) $\dfrac{r}{mv^{2}}$
D) $\dfrac{mv^2}{r}$
Answer: D
To determine the required centripetal force, we must look at the fundamental principles of circular motion. Centripetal force is the inward force required to keep an object moving in a circular path at a constant speed. It is always directed toward the center of the rotation.
According to Newton's Second Law of Motion, force is equal to mass times acceleration (\( F = ma \)). In the case of circular motion, the acceleration is the centripetal acceleration (\( a_c \)), which is defined as the square of the velocity divided by the radius of the path:
\[ a_c = \frac{v^2}{r} \]
By substituting this acceleration into the force equation, we derive the standard formula for centripetal force (\( F_c \)):
\[ F_c = \frac{mv^2}{r} \]
Where:
- \( m \) is the mass of the object (\( 4\,\text{kg} \) in this problem).
- \( v \) is the tangential speed (\( 6\,\text{m s}^{-1} \) in this problem).
- \( r \) is the radius of the circle (\( 2\,\text{m} \) in this problem).
If we were to calculate the numerical value for this specific question, it would be:
\[ F_c = \frac{4 \times 6^2}{2} = \frac{4 \times 36}{2} = 72\,\text{N} \]
Comparing the derived formula to the given options, Option D correctly represents the mathematical expression for centripetal force.
The centripetal force is calculated by multiplying the mass by the square of the velocity and dividing the result by the radius of the circular path.
-
Q58.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{g/\tan\phi}$
B) $v=\sqrt{rg\tan\phi}$
C) $v=\sqrt{gr\tan\phi}$
D) $v=rg\phi$
Answer: B
-
Q59.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{gr\tan\phi}$
B) $v=rg\phi$
C) $v=\sqrt{g/\tan\phi}$
D) $v=\sqrt{rg\tan\phi}$
Answer: D
-
Q60.
A mass $m=0.5\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $\dfrac{r}{mv^{2}}$
C) $mvr$
D) $\dfrac{mv^2}{r}$
Answer: D
-
Q61.
Choose the correct set of analogies:
A) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
B) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
C) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
D) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
Answer: B
-
Q62.
Moment of inertia of a solid sphere about the standard axis is:
A) $I=ML^{2}$
B) $I=\tfrac23 MR^{2}$
C) $I=\tfrac25 MR^{2}$
D) $I=\tfrac34 MR^{2}$
Answer: C
-
Q63.
Choose the correct set of analogies:
A) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
B) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
C) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
D) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
Answer: B
-
Q64.
Moment of inertia of a solid sphere about the standard axis is:
A) $I=\tfrac34 MR^{2}$
B) $I=ML^{2}$
C) $I=\tfrac25 MR^{2}$
D) $I=\tfrac23 MR^{2}$
Answer: C
-
Q65.
A mass $m=0.5\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=2\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $\dfrac{r}{mv^{2}}$
C) $mvr$
D) $\dfrac{mv^2}{r}$
Answer: D
-
Q66.
A mass $m=0.5\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=2\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{r}{mv^{2}}$
B) $\dfrac{v}{mr}$
C) $\dfrac{mv^2}{r}$
D) $mvr$
Answer: C
-
Q67.
Choose the correct set of analogies:
A) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
B) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
C) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
D) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
Answer: B
-
Q68.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{rg\tan\phi}$
B) $v=rg\phi$
C) $v=\sqrt{g/\tan\phi}$
D) $v=\sqrt{gr\tan\phi}$
Answer: A
-
Q69.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $I\omega$
B) $\tfrac12 mv^{2}$
C) $\tfrac12 I\omega^{2}$
D) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
Answer: D
-
Q70.
A mass $m=4\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=2\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $\dfrac{mv^2}{r}$
C) $\dfrac{r}{mv^{2}}$
D) $mvr$
Answer: B
-
Q71.
A mass $m=0.5\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=10\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $\dfrac{mv^2}{r}$
C) $\dfrac{r}{mv^{2}}$
D) $mvr$
Answer: B
-
Q72.
Choose the correct set of analogies:
A) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
B) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
C) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
D) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
Answer: B
-
Q73.
Choose the correct set of analogies:
A) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
B) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
C) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
D) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
Answer: C
-
Q74.
Choose the correct set of analogies:
A) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
B) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
C) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
D) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
Answer: C
-
Q75.
In absence of external torque, a spinning body tends to:
A) reverse spin spontaneously
B) double its angular speed
C) keep its angular momentum vector constant
D) lose all rotational KE
Answer: C
-
Q76.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=I\omega$
B) $W=\tau\,\theta$
C) $W=\alpha\theta$
D) $W=\tau/\theta$
Answer: B
-
Q77.
A mass $m=1\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $mvr$
C) $\dfrac{mv^2}{r}$
D) $\dfrac{r}{mv^{2}}$
Answer: C
-
Q78.
In absence of external torque, a spinning body tends to:
A) double its angular speed
B) keep its angular momentum vector constant
C) reverse spin spontaneously
D) lose all rotational KE
Answer: B
-
Q79.
A mass $m=0.5\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $mvr$
C) $\dfrac{r}{mv^{2}}$
D) $\dfrac{mv^2}{r}$
Answer: D
-
Q80.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $\tfrac12 mv^{2}$
B) $\tfrac12 I\omega^{2}$
C) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
D) $I\omega$
Answer: C
-
Q81.
In absence of external torque, a spinning body tends to:
A) lose all rotational KE
B) keep its angular momentum vector constant
C) double its angular speed
D) reverse spin spontaneously
Answer: B
-
Q82.
Moment of inertia of a solid disc about the standard axis is:
A) $I=ML^{2}$
B) $I=\tfrac34 MR^{2}$
C) $I=\tfrac12 MR^{2}$
D) $I=\tfrac23 MR^{2}$
Answer: C
-
Q83.
Moment of inertia of a solid disc about the standard axis is:
A) $I=\tfrac34 MR^{2}$
B) $I=\tfrac12 MR^{2}$
C) $I=\tfrac23 MR^{2}$
D) $I=ML^{2}$
Answer: B
-
Q84.
Moment of inertia of a thin rod (center) about the standard axis is:
A) $I=ML^{2}$
B) $I=\tfrac{1}{12}ML^{2}$
C) $I=\tfrac23 MR^{2}$
D) $I=\tfrac34 MR^{2}$
Answer: B
-
Q85.
Choose the correct set of analogies:
A) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
B) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
C) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
D) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
Answer: D
-
Q86.
A mass $m=2\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{mv^2}{r}$
B) $\dfrac{v}{mr}$
C) $mvr$
D) $\dfrac{r}{mv^{2}}$
Answer: A
-
Q87.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $I\omega$
B) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
C) $\tfrac12 mv^{2}$
D) $\tfrac12 I\omega^{2}$
Answer: B
-
Q88.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=\alpha\theta$
B) $W=\tau\,\theta$
C) $W=\tau/\theta$
D) $W=I\omega$
Answer: B
-
Q89.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $I\omega$
B) $\tfrac12 mv^{2}$
C) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
D) $\tfrac12 I\omega^{2}$
Answer: C
-
Q90.
A mass $m=2\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=10\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $\dfrac{r}{mv^{2}}$
C) $\dfrac{mv^2}{r}$
D) $mvr$
Answer: C
-
Q91.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=\tau/\theta$
B) $W=\tau\,\theta$
C) $W=I\omega$
D) $W=\alpha\theta$
Answer: B
-
Q92.
A mass $m=2\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $mvr$
B) $\dfrac{mv^2}{r}$
C) $\dfrac{v}{mr}$
D) $\dfrac{r}{mv^{2}}$
Answer: B
-
Q93.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{g/\tan\phi}$
B) $v=\sqrt{gr\tan\phi}$
C) $v=rg\phi$
D) $v=\sqrt{rg\tan\phi}$
Answer: D
-
Q94.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $\tfrac12 I\omega^{2}$
B) $I\omega$
C) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
D) $\tfrac12 mv^{2}$
Answer: C
-
Q95.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{g/\tan\phi}$
B) $v=rg\phi$
C) $v=\sqrt{gr\tan\phi}$
D) $v=\sqrt{rg\tan\phi}$
Answer: D
-
Q96.
Moment of inertia of a solid sphere about the standard axis is:
A) $I=ML^{2}$
B) $I=\tfrac34 MR^{2}$
C) $I=\tfrac25 MR^{2}$
D) $I=\tfrac23 MR^{2}$
Answer: C
-
Q97.
A mass $m=4\,\text{kg}$ moves in a circle of radius $r=1\,\text{m}$ with speed $v=6\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{mv^2}{r}$
B) $\dfrac{r}{mv^{2}}$
C) $\dfrac{v}{mr}$
D) $mvr$
Answer: A
-
Q98.
A mass $m=4\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=2\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{r}{mv^{2}}$
B) $\dfrac{v}{mr}$
C) $mvr$
D) $\dfrac{mv^2}{r}$
Answer: D
-
Q99.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{g/\tan\phi}$
B) $v=\sqrt{rg\tan\phi}$
C) $v=\sqrt{gr\tan\phi}$
D) $v=rg\phi$
Answer: B
-
Q100.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{gr\tan\phi}$
B) $v=\sqrt{g/\tan\phi}$
C) $v=rg\phi$
D) $v=\sqrt{rg\tan\phi}$
Answer: D
-
Q101.
Moment of inertia of a hoop about the standard axis is:
A) $I=MR^{2}$
B) $I=\tfrac34 MR^{2}$
C) $I=ML^{2}$
D) $I=\tfrac23 MR^{2}$
Answer: A
The moment of inertia of an object measures its resistance to rotational acceleration about a specific axis. For a hoop, which is also commonly referred to as a thin circular ring, the total mass M is distributed uniformly along its circumference at a constant distance R from the center.
The standard axis for a hoop is defined as the axis passing through its center of mass and perpendicular to the plane of the hoop. Because every small element of mass dm in the hoop is located at the exact same radial distance R from this central axis, the calculation for the moment of inertia is based on the sum of these mass elements multiplied by the square of their distance from the axis.
Mathematically, the moment of inertia I is defined by the following integral:
\[ I = \int r^{2} dm \]
Since the distance \( r \) is equal to the radius \( R \) for every point on the hoop, we can treat \( R^{2} \) as a constant and move it outside the integral:
\[ I = R^{2} \int dm \]
The integral of all mass elements \( \int dm \) simply equals the total mass M of the hoop. Therefore, the formula simplifies to:
\[ I = MR^{2} \]
This matches Option A. Other formulas, such as \( \frac{2}{3}MR^{2} \) or \( \frac{1}{2}MR^{2} \), correspond to different geometries like a thin-walled hollow sphere or a solid cylinder, respectively.
In summary, the moment of inertia of a hoop about its standard central axis is \( MR^{2} \) because all of its mass is located at the same distance from the axis of rotation.
-
Q102.
Choose the correct set of analogies:
A) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
B) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
C) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
D) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
Answer: A
-
Q103.
In absence of external torque, a spinning body tends to:
A) reverse spin spontaneously
B) double its angular speed
C) lose all rotational KE
D) keep its angular momentum vector constant
Answer: D
-
Q104.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $\tfrac12 mv^{2}$
B) $I\omega$
C) $\tfrac12 I\omega^{2}$
D) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
Answer: D
-
Q105.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=\tau/\theta$
B) $W=\alpha\theta$
C) $W=I\omega$
D) $W=\tau\,\theta$
Answer: D
-
Q106.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $I\omega$
B) $\tfrac12 mv^{2}$
C) $\tfrac12 I\omega^{2}$
D) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
Answer: D
-
Q107.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=\tau/\theta$
B) $W=\tau\,\theta$
C) $W=\alpha\theta$
D) $W=I\omega$
Answer: B
-
Q108.
In absence of external torque, a spinning body tends to:
A) keep its angular momentum vector constant
B) reverse spin spontaneously
C) double its angular speed
D) lose all rotational KE
Answer: A
-
Q109.
Choose the correct set of analogies:
A) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
B) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
C) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
D) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
Answer: A
-
Q110.
Moment of inertia of a solid sphere about the standard axis is:
A) $I=\tfrac25 MR^{2}$
B) $I=\tfrac34 MR^{2}$
C) $I=\tfrac23 MR^{2}$
D) $I=ML^{2}$
Answer: A
-
Q111.
In absence of external torque, a spinning body tends to:
A) lose all rotational KE
B) double its angular speed
C) keep its angular momentum vector constant
D) reverse spin spontaneously
Answer: C
-
Q112.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=I\omega$
B) $W=\tau/\theta$
C) $W=\tau\,\theta$
D) $W=\alpha\theta$
Answer: C
-
Q113.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=\alpha\theta$
B) $W=\tau\,\theta$
C) $W=I\omega$
D) $W=\tau/\theta$
Answer: B
-
Q114.
Moment of inertia of a hoop about the standard axis is:
A) $I=ML^{2}$
B) $I=\tfrac34 MR^{2}$
C) $I=MR^{2}$
D) $I=\tfrac23 MR^{2}$
Answer: C
-
Q115.
Choose the correct set of analogies:
A) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
B) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
C) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
D) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
Answer: B
-
Q116.
In absence of external torque, a spinning body tends to:
A) keep its angular momentum vector constant
B) lose all rotational KE
C) reverse spin spontaneously
D) double its angular speed
Answer: A
-
Q117.
Moment of inertia of a solid sphere about the standard axis is:
A) $I=\tfrac23 MR^{2}$
B) $I=\tfrac25 MR^{2}$
C) $I=ML^{2}$
D) $I=\tfrac34 MR^{2}$
Answer: B
-
Q118.
In absence of external torque, a spinning body tends to:
A) lose all rotational KE
B) double its angular speed
C) reverse spin spontaneously
D) keep its angular momentum vector constant
Answer: D
-
Q119.
Moment of inertia of a solid sphere about the standard axis is:
A) $I=\tfrac34 MR^{2}$
B) $I=\tfrac25 MR^{2}$
C) $I=ML^{2}$
D) $I=\tfrac23 MR^{2}$
Answer: B
-
Q120.
Moment of inertia of a solid disc about the standard axis is:
A) $I=\tfrac23 MR^{2}$
B) $I=\tfrac12 MR^{2}$
C) $I=ML^{2}$
D) $I=\tfrac34 MR^{2}$
Answer: B
-
Q121.
A mass $m=2\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $mvr$
B) $\dfrac{v}{mr}$
C) $\dfrac{r}{mv^{2}}$
D) $\dfrac{mv^2}{r}$
Answer: D
-
Q122.
Choose the correct set of analogies:
A) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
B) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
C) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
D) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
Answer: D
-
Q123.
A mass $m=1\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $mvr$
B) $\dfrac{v}{mr}$
C) $\dfrac{mv^2}{r}$
D) $\dfrac{r}{mv^{2}}$
Answer: C
-
Q124.
In absence of external torque, a spinning body tends to:
A) reverse spin spontaneously
B) keep its angular momentum vector constant
C) lose all rotational KE
D) double its angular speed
Answer: B
-
Q125.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=\tau\,\theta$
B) $W=\alpha\theta$
C) $W=\tau/\theta$
D) $W=I\omega$
Answer: A
-
Q126.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{g/\tan\phi}$
B) $v=\sqrt{rg\tan\phi}$
C) $v=rg\phi$
D) $v=\sqrt{gr\tan\phi}$
Answer: B
-
Q127.
A mass $m=4\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=10\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{r}{mv^{2}}$
B) $\dfrac{mv^2}{r}$
C) $mvr$
D) $\dfrac{v}{mr}$
Answer: B
-
Q128.
Moment of inertia of a hoop about the standard axis is:
A) $I=MR^{2}$
B) $I=ML^{2}$
C) $I=\tfrac23 MR^{2}$
D) $I=\tfrac34 MR^{2}$
Answer: A
-
Q129.
Choose the correct set of analogies:
A) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
B) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
C) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
D) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
Answer: B
-
Q130.
A mass $m=0.5\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{r}{mv^{2}}$
B) $mvr$
C) $\dfrac{mv^2}{r}$
D) $\dfrac{v}{mr}$
Answer: C
-
Q131.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=rg\phi$
B) $v=\sqrt{rg\tan\phi}$
C) $v=\sqrt{gr\tan\phi}$
D) $v=\sqrt{g/\tan\phi}$
Answer: B
-
Q132.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $\tfrac12 mv^{2}$
B) $\tfrac12 I\omega^{2}$
C) $I\omega$
D) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
Answer: D
-
Q133.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
B) $\tfrac12 mv^{2}$
C) $\tfrac12 I\omega^{2}$
D) $I\omega$
Answer: A
-
Q134.
A mass $m=1\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=2\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{r}{mv^{2}}$
B) $mvr$
C) $\dfrac{v}{mr}$
D) $\dfrac{mv^2}{r}$
Answer: D
-
Q135.
Moment of inertia of a solid disc about the standard axis is:
A) $I=\tfrac23 MR^{2}$
B) $I=ML^{2}$
C) $I=\tfrac12 MR^{2}$
D) $I=\tfrac34 MR^{2}$
Answer: C
-
Q136.
Choose the correct set of analogies:
A) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
B) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
C) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
D) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
Answer: D
-
Q137.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{gr\tan\phi}$
B) $v=\sqrt{rg\tan\phi}$
C) $v=rg\phi$
D) $v=\sqrt{g/\tan\phi}$
Answer: B
-
Q138.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{rg\tan\phi}$
B) $v=rg\phi$
C) $v=\sqrt{gr\tan\phi}$
D) $v=\sqrt{g/\tan\phi}$
Answer: A
-
Q139.
In absence of external torque, a spinning body tends to:
A) lose all rotational KE
B) keep its angular momentum vector constant
C) double its angular speed
D) reverse spin spontaneously
Answer: B
-
Q140.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=\sqrt{rg\tan\phi}$
B) $v=\sqrt{gr\tan\phi}$
C) $v=rg\phi$
D) $v=\sqrt{g/\tan\phi}$
Answer: A
-
Q141.
Work done by a constant torque $\tau$ through angle $\theta$ is:
A) $W=I\omega$
B) $W=\tau\,\theta$
C) $W=\alpha\theta$
D) $W=\tau/\theta$
Answer: B
-
Q142.
On a frictionless banked curve of radius $r$ and bank angle $\phi$, the ideal speed is:
A) $v=rg\phi$
B) $v=\sqrt{gr\tan\phi}$
C) $v=\sqrt{g/\tan\phi}$
D) $v=\sqrt{rg\tan\phi}$
Answer: D
-
Q143.
A mass $m=0.5\,\text{kg}$ moves in a circle of radius $r=1\,\text{m}$ with speed $v=10\,\text{m s}^{-1}$. The required centripetal force is:
A) $mvr$
B) $\dfrac{r}{mv^{2}}$
C) $\dfrac{mv^2}{r}$
D) $\dfrac{v}{mr}$
Answer: C
-
Q144.
A mass $m=4\,\text{kg}$ moves in a circle of radius $r=5\,\text{m}$ with speed $v=10\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $mvr$
C) $\dfrac{mv^2}{r}$
D) $\dfrac{r}{mv^{2}}$
Answer: C
-
Q145.
Choose the correct set of analogies:
A) $F\leftrightarrow \tau,\ a\leftrightarrow\alpha,\ m\leftrightarrow I$
B) $F\leftrightarrow a,\ m\leftrightarrow\tau,\ I\leftrightarrow\alpha$
C) $F\leftrightarrow \omega,\ a\leftrightarrow I,\ m\leftrightarrow\tau$
D) $F\leftrightarrow I,\ a\leftrightarrow\tau,\ m\leftrightarrow\alpha$
Answer: A
-
Q146.
In absence of external torque, a spinning body tends to:
A) keep its angular momentum vector constant
B) reverse spin spontaneously
C) lose all rotational KE
D) double its angular speed
Answer: A
-
Q147.
A mass $m=1\,\text{kg}$ moves in a circle of radius $r=1\,\text{m}$ with speed $v=10\,\text{m s}^{-1}$. The required centripetal force is:
A) $mvr$
B) $\dfrac{v}{mr}$
C) $\dfrac{mv^2}{r}$
D) $\dfrac{r}{mv^{2}}$
Answer: C
-
Q148.
A mass $m=1\,\text{kg}$ moves in a circle of radius $r=2\,\text{m}$ with speed $v=4\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{v}{mr}$
B) $mvr$
C) $\dfrac{r}{mv^{2}}$
D) $\dfrac{mv^2}{r}$
Answer: D
-
Q149.
For a rigid body rolling without slipping, total kinetic energy equals:
A) $I\omega$
B) $\tfrac12 I\omega^{2}$
C) $\tfrac12 mv^{2}+\tfrac12 I\omega^{2}$
D) $\tfrac12 mv^{2}$
Answer: C
-
Q150.
A mass $m=4\,\text{kg}$ moves in a circle of radius $r=3\,\text{m}$ with speed $v=2\,\text{m s}^{-1}$. The required centripetal force is:
A) $\dfrac{mv^2}{r}$
B) $\dfrac{v}{mr}$
C) $\dfrac{r}{mv^{2}}$
D) $mvr$
Answer: A
-
Q151.
The point on the rim of a wheel moves 0.3 m when wheel turns through an angle of 30°. The radius of wheel is
A) 1.8\pi m
B) \pi 1.8 m
C) 0.01 m
D) 0.1 m
Answer: A
-
Q152.
Speed of second’s hand of a watch in rad/sec is
A) \(\pi 30 / 30\)
B) \(\pi 1800\)
C) \(\pi 4320 / 400\)
D) \(\pi 33\)
Answer: B
-
Q153.
Angular speed of earth about its axis
A) \(\pi 432 \times 10^{-2}\)
B) \(\pi 18 \times 10^{-2}\)
C) 7.3 \(\times 10^{-5}\)
D) Both A and C
Answer: D
-
Q154.
Three particles of a rigid body rotating about a fixed axis are located at 5 cm, 10 cm and 15 cm from axis of rotation. Which particle has greater tangential velocity?
A) 5 cm
B) 10 cm
C) 15 cm
D) All have same tangential speed
Answer: C
-
Q155.
The linear velocity of a person standing at the equator of the earth.
A) 465.4 m/s
B) 4.654 m/s
C) 46.54 m/s
D) Zero
Answer: A
-
Q156.
The ratio of angular speed of minutes\' hand and hours hand of a watch is
A) 1:12
B) 12:1
C) 60:1
D) 1:60
Answer: A
-
Q157.
A rotating wheel of radius 0.5 m has an angular velocity of 5 rad/sec at some instant and 10 rad/sec after 5 s. Its angular acceleration is
A) 2 rad/sec²
B) 1 rad/sec²
C) 0.5 rad/sec²
D) 4 rad/sec²
Answer: B
-
Q158.
A ball of radius 5 cm rolls down an inclined plane from rest. After 4.0 s, its angular velocity is 8 rad/sec. Its angular acceleration and linear acceleration are respectively
A) 2 rad/sec², 1 m/s²
B) 0.2 rad/sec², 0.1 m/s²
C) Zero, 0.1 m/s²
D) 2 rad/sec², 0.1 m/s²
Answer: D
-
Q159.
The direction of angular velocity is along
A) Tangent to the circle
B) Inward radius
C) Outward radius
D) The axis of rotation
Answer: D
-
Q160.
If \(\Gamma_1=4i + 2\)
\n and \(\Gamma \omega=4j + 3\)
\n then \(\zeta\) is along
A) + x - axis
B) + z - axis
C) -z - axis
D) -y - axis
Answer: C
-
Q161.
A car is traveling on a circular road of radius 500 m. at some instant its speed is 50 m/s and increasing at the rate of 2 m/s². Its acceleration will be
A) 0.1 m/s²
B) 3 m/s²
C) 13 m/s²
D) 9 m/s²
Answer: D
-
Q162.
Maximum tension in the string of length 1 m when tied to a mass of 100 g and making 2 revolutions per second is
A) 1.6\(\pi^2\) N
B) 16\(\pi^2\) N
C) 160\(\pi^2\) N
D) 0.16\(\pi^2\) N
Answer: B
-
Q163.
A stone tied to the end of a circle is whirled in a vertical circle. The tension at the lowest point is maximum
A) The tension at the lowest point is maximum
B) The speed at the lowest point is maximum
C) The speed at the highest point is minimum
D) All of these
Answer: D
-
Q164.
If a wheel of diameter 1 m is rotating at 2 rad/sec then its linear rim velocity is
A) 1 m/s
B) 2 m/s
C) 0.5 m/s
D) 0.75 m/s
Answer: B
-
Q165.
If a disc is rotating anticlockwise in xy plane, then \(\omega\) is along
A) x-axis
B) y-axis
C) z-axis
D) - y - axis
Answer: C
-
Q166.
The angular speed of minute’s hand of clock in rad/sec is
A) \(\pi 60 / 60\)
B) \(\pi 1800\)
C) \(\pi 8640 / 8640\)
D) \(\pi 4320 / 4320\)
Answer: A
-
Q167.
A toy car is rotating in circle with angular speed of 60 rev/min. If the circle radius is 1 m, then linear speed of car in m/s is
A) 2\(\pi\)
B) \(\pi\)
C) 9\(\pi\)
D) 3\(\pi\)
Answer: A
-
Q168.
If the angular velocity of a body increases from zero to 60 rev/min in 1 sec, the angular acceleration in rad/sec² is
A) \(\pi\)
B) 2\(\pi\)
C) 3\(\pi\)
D) 4\(\pi\)
Answer: B
-
Q169.
A couple produces
A) Purely linear motion
B) Purely rotational motion
C) Linear and rotational motion
D) No motion
Answer: B
-
Q170.
A body of mass 5 kg is moving in a circle of radius 1 m with angular speed of 2 rad/sec. The centripetal force is
A) 40 N
B) 30 N
C) 10 N
D) 20 N
Answer: A
-
Q171.
A stone attached to a string is being whirled in a vertical circle. The string is likely to break when the stone is at
A) Lowest position
B) Highest position
C) Any point
D) At middle
Answer: A
To understand why the string is most likely to break at the lowest position, we must analyze the forces acting on the stone as it moves through a vertical circle.
In vertical circular motion, the tension in the string changes depending on the stone's position. The net force directed toward the center of the circle is the centripetal force, which is defined by the formula:
\[ F_c = \frac{mv^2}{r} \]
At the highest position of the circle, both the tension (\( T_{top} \)) and the weight of the stone (\( mg \)) act downward toward the center. Therefore, the equation for the centripetal force is:
\[ T_{top} + mg = \frac{mv_{top}^2}{r} \]
Solving for tension, we get:
\[ T_{top} = \frac{mv_{top}^2}{r} - mg \]
At the lowest position, the tension (\( T_{bottom} \)) acts upward toward the center, while the weight (\( mg \)) acts downward, away from the center. The equation for the centripetal force at this point is:
\[ T_{bottom} - mg = \frac{mv_{bottom}^2}{r} \]
Solving for tension, we get:
\[ T_{bottom} = \frac{mv_{bottom}^2}{r} + mg \]
By comparing these two equations, it is clear that the tension at the bottom is significantly higher because the weight is added to the centripetal term rather than subtracted from it. Additionally, due to the conservation of energy, the stone's velocity (\( v \)) is at its maximum at the lowest point as gravitational potential energy is converted into kinetic energy.
Since the tension reaches its maximum value at the lowest point of the swing, this is the point where the string is most likely to exceed its breaking strength and snap.
In summary, the string is most likely to break at the lowest position because the tension must support the stone's weight while also providing the maximum required centripetal force.
-
Q172.
Work done by centripetal force in half revolution is
A) \(2mv^2 r\)
B) \(mv^2 2r\)
C) Zero
D) \(2mv^2 3r\)
Answer: C
To understand why the work done is zero, we must look at the mathematical definition of work in physics. Work done (W) by a force (F) over a displacement (d) is given by the following formula:
\[ W = \vec{F} \cdot \vec{d} = F \cdot d \cdot \cos(\theta) \]
In this equation, \(\theta\) represents the angle between the direction of the force and the direction of the displacement.
In circular motion, the centripetal force always acts toward the center of the circular path (along the radius). At the same time, the instantaneous displacement of the object at any given point is directed along the tangent to the circle at that point.
According to the principles of geometry, the radius of a circle is always perpendicular to the tangent at any point on the circumference. Therefore, the angle \(\theta\) between the centripetal force and the displacement is always \(90^\circ\).
When we substitute this angle into the work formula, we get:
\[ W = F \cdot d \cdot \cos(90^\circ) \]
Since the value of \(\cos(90^\circ)\) is 0, the calculation results in:
\[ W = F \cdot d \cdot 0 = 0 \]
This principle applies to any segment of the circular path. Whether the object completes a full revolution, a half revolution, or just a small fraction of the circle, the force remains perpendicular to the motion at every single instant. Consequently, the centripetal force does not change the kinetic energy of the object and performs no work.
In summary, the work done by centripetal force is always zero because the force is always perpendicular to the direction of motion.
-
Q173.
A cyclist bends while taking a turn to
A) Reduce reaction
B) Reduce speed
C) Provide centripetal force
D) Reduce friction
Answer: C
-
Q174.
In uniform circular motion, which of the following does not remain constant?
A) Speed
B) Angular momentum
C) K.E
D) Momentum
Answer: A
-
Q175.
If a fan is switched ON, then its angular acceleration and angular velocity are
A) Parallel
B) Antiparallel
C) Perpendicular
D) Inclined at an angle less than 90°
Answer: A
-
Q176.
A motorcyclist doubles its velocity while taking a turn. The force exerted outwardly will be
A) Doubled
B) Increased by 4 times
C) Halved
D) Decreased by 4 times
Answer: B
-
Q177.
Linear velocity \(\vec{V}\) and centripetal force \(\vec{F}_c\) are
A) Perpendicular
B) Parallel
C) Antiparallel
D) Inclined at 45° to each other
Answer: A
-
Q178.
The point at which an applied force produces a linear acceleration but no rotation is called
A) Centre of gravity
B) Origin
C) Geometric center
D) Centre of mass
Answer: D
-
Q179.
Which of the following quantities remain constant in a planetary motion?
A) Speed
B) K.E
C) Angular momentum
D) Angular speed
Answer: C
-
Q180.
If the angular velocity of Earth around its own axis is doubled, which statement is correct?
A) \(K.E_{rot} = \text{doubled}\), \(T = \text{halved}\)
B) \(K.E_{rot} = \text{fourfold}\), \(T = \text{halved}\)
C) \(K.E_{rot} = \text{constant}\)
D) \(T = \text{constant}\)
Answer: B
To understand the effect of doubling the Earth's angular velocity (\( \omega \)), we must examine the physical formulas for rotational kinetic energy and the time period of rotation.
1. Rotational Kinetic Energy (\( K.E_{rot} \)):
The rotational kinetic energy of a body is defined by the formula:
\[ K.E_{rot} = \frac{1}{2} I \omega^2 \]
In this equation, \( I \) represents the moment of inertia and \( \omega \) represents the angular velocity. If the angular velocity is doubled, we substitute \( 2\omega \) into the formula:
\[ K.E'_{rot} = \frac{1}{2} I (2\omega)^2 \]
\[ K.E'_{rot} = \frac{1}{2} I (4\omega^2) = 4 \times \left( \frac{1}{2} I \omega^2 \right) \]
Since the energy is proportional to the square of the angular velocity, doubling the velocity results in the kinetic energy becoming fourfold.
2. Time Period (\( T \)):
The time period of rotation is the time it takes for the Earth to complete one full turn on its axis. It is related to angular velocity by the following formula:
\[ T = \frac{2\pi}{\omega} \]
If the angular velocity is doubled (\( \omega' = 2\omega \)), the new time period (\( T' \)) is calculated as:
\[ T' = \frac{2\pi}{2\omega} = \frac{1}{2} \times \left( \frac{2\pi}{\omega} \right) = \frac{T}{2} \]
This inverse relationship means that doubling the speed of rotation causes the time period to be halved.
Based on these calculations, Option B is the correct choice because it accurately reflects that the rotational kinetic energy increases by a factor of four while the time period is reduced by half.
In summary, because kinetic energy depends on the square of angular velocity and the time period is inversely proportional to it, doubling the rotation speed quadruples the energy and halves the day's length.
-
Q181.
The acceleration of a body undergoing uniform circular motion is constant in
A) Magnitude only
B) Direction only
C) Both magnitude and direction
D) Neither magnitude nor direction
Answer: A
-
Q182.
A pendulum on Earth has a time period 1 sec. Its time period in a box orbiting Earth is
A) 1 s
B) 5 s
C) 0
D) 8
Answer: A
-
Q183.
Angular speed of a satellite around Earth is
A) \(\sqrt{\frac{GM}{r^3}}\)
B) \(\frac{GM}{r}\)
C) \(\sqrt{\frac{GM 2}{r^3}}\)
D) \(\frac{GM}{r}\)
Answer: A
-
Q184.
Trackers in cars use global positioning system which consists of how many satellites?
A) 12
B) 24
C) 6
D) 18
Answer: B
-
Q185.
Minimum number of geostationary satellites required to cover the whole earth. The angular displacement between them will be
A) 60°
B) 120°
C) 180°
D) 240°
Answer: B
To understand the minimum number of geostationary satellites required for global coverage, we must consider the geometry of the Earth and the altitude of the satellites. A geostationary satellite orbits at an altitude of approximately 35,786 kilometers above the Earth's equator. At this height, a single satellite can "see" or cover a significant portion, but not all, of the Earth's surface.
1. Determining the Number of Satellites:
Due to the curvature of the Earth, a single satellite cannot transmit signals to the entire planet simultaneously. It can only cover a portion of the hemisphere facing it. To ensure that every point along the equator is within the line of sight of at least one satellite, geometric calculations show that a minimum of 3 satellites is necessary to cover the entire \( 360^\circ \) circumference of the Earth.
2. Calculating the Angular Displacement:
Since the satellites are placed in a circular orbit (the geostationary belt), the total angular distance around the Earth is \( 360^\circ \). To provide uniform and efficient coverage, these three satellites must be spaced equally along this orbit. The angular displacement between them is calculated as follows:
\[ \text{Angular Displacement} = \frac{\text{Total Degrees in a Circle}}{\text{Number of Satellites}} \]
\[ \text{Angular Displacement} = \frac{360^\circ}{3} = 120^\circ \]
This 120-degree separation ensures that the coverage footprint of each satellite overlaps or meets the next, providing a continuous communication link around the globe, excluding the extreme polar regions.
3. Conclusion:
Based on this geometric requirement, the minimum number of satellites is 3, and the angle between any two adjacent satellites is \( 120^\circ \). This matches Option B.
In summary, three geostationary satellites placed at an angular interval of 120 degrees are the minimum requirement to ensure worldwide communication coverage.
-
Q186.
If a satellite is orbiting around earth then ______ cannot be used to mean time
A) Pendulum clock
B) Elastic spring watch
C) Atomic clock
D) Electric oscillation clock
Answer: A
-
Q187.
If value of g is 10 m/s², then critical velocity of satellite close to earth is
A) 8 m/s
B) 8 km/s
C) 80 m/s
D) 80 km/s
Answer: B
-
Q188.
A satellite moving round the earth constitutes
A) An inertial frame of reference
B) non inertial frame
C) neither inertial nor non inertial
D) both inertial and non-inertial
Answer: A
-
Q189.
When a body moves in a circle, the angle between its linear velocity and angular velocity is always
A) 180°
B) 0°
C) 90°
D) 45°
Answer: C
-
Q190.
If a car moves with a uniform speed of 2 m/s in a circle of radius 0.4 m, its angular speed is
A) 4 rad/sec
B) 5 rad/sec
C) 1.6 rad/sec
D) 2.8 rad/sec
Answer: C