Vectors and Equilibrium MCQs for MDCAT Physics

199 MCQs with answers and explanations for the Vectors and Equilibrium chapter. Practice one question at a time, or read the full bank below.
All chapters
Question 1 of 199 Score: 0

All Vectors and Equilibrium MCQs with answers

199 MCQs for MDCAT Physics. The quiz above checks one question at a time. Every question, option, and saved explanation is on this page.

  1. Q1.

    The resultant of two vectors of magnitude 2 and 3  unit is 1 unit the angle between them is 

    1. A)  180º

    2. B)  90º

    3. C)  60º

    4. D)  45º

    Answer: A

    Okay, let's break down why the correct answer is A) 180°. Here's the reasoning, explained step-by-step: We're given the magnitudes of two vectors (let's call them **a** and **b**) and the magnitude of their resultant (**R**). We need to find the angle (θ) between them. We can use the Law of Cosines to solve this. The Law of Cosines relates the sides of a triangle to one of its angles. In this case, we can think of the vectors **a**, **b**, and **R** as forming a triangle. The Law of Cosines formula we'll use is: \[ R^2 = a^2 + b^2 - 2ab \cos(\theta) \] Where: * R is the magnitude of the resultant vector (1 unit) * a is the magnitude of the first vector (2 units) * b is the magnitude of the second vector (3 units) * θ is the angle between the two vectors (what we want to find) Now, let's plug in the given values: \[ 1^2 = 2^2 + 3^2 - 2(2)(3) \cos(\theta) \] \[ 1 = 4 + 9 - 12 \cos(\theta) \] \[ 1 = 13 - 12 \cos(\theta) \] Now, let's isolate the cosine term: \[ 12 \cos(\theta) = 13 - 1 \] \[ 12 \cos(\theta) = 12 \] \[ \cos(\theta) = \frac{12}{12} \] \[ \cos(\theta) = 1 \] To find the angle θ, we need to find the inverse cosine (arccos) of 1: \[ \theta = \arccos(1) \] The angle whose cosine is 1 is 180°. \[ \theta = 180^\circ \] Therefore, the angle between the two vectors is 180°. This means the vectors are pointing in opposite directions.
    This aligns with option A.
  2. Q2.

    Two forces of 6N and 8N can produce resultant of 

    1. A)  0 N

    2. B)  1 N

    3. C)  10 N

    4. D)  18 N

    Answer: C

    Okay, let's break down why the correct answer is C) 10 N. This question deals with vector addition, specifically finding the resultant force when two forces are acting. Here's the explanation: The resultant force is the single force that has the same effect as the original two forces combined. The magnitude of the resultant force depends on the angle between the two forces. There are three possible scenarios: 1. **Forces acting in the same direction:** In this case, the forces add up. 2. **Forces acting in opposite directions:** In this case, the forces subtract. 3. **Forces acting at an angle:** This requires using the law of cosines, which is more complex. However, the question doesn't give us any information about the angle between the forces. Therefore, we need to consider the *maximum* and *minimum* possible resultant forces. * **Maximum Resultant:** The maximum resultant force occurs when the forces act in the *same* direction. In this case, we simply add the magnitudes of the forces: \[ F_{resultant, max} = F_1 + F_2 = 6 \text{ N} + 8 \text{ N} = 14 \text{ N} \] * **Minimum Resultant:** The minimum resultant force occurs when the forces act in *opposite* directions. In this case, we subtract the smaller force from the larger force: \[ F_{resultant, min} = |F_1 - F_2| = |6 \text{ N} - 8 \text{ N}| = |-2 \text{ N}| = 2 \text{ N} \] So, the resultant force can be anywhere between 2 N and 14 N, inclusive. Looking at the options provided: * A) 0 N - Too low. * B) 1 N - Too low. * C) 10 N - This falls within the possible range (2 N to 14 N). * D) 18 N - Too high. Therefore, 10 N is the most reasonable answer given the options. It's a value that *could* be the resultant force depending on the angle between the two forces. Without more information, we assume the simplest case where the resultant is somewhere in between the maximum and minimum values.
    **Important Note:** If the question had specified that the forces were acting at right angles to each other, we would have used the Pythagorean theorem to find the resultant. But since no angle is given, we consider the range of possible resultant forces.
  3. Q3.

    Which one is the vector out of following?

    1. A)  Current

    2. B)  Electrostatic Potential

    3. C)  Charge

    4. D)  Moment of force

    Answer: D

    To determine which of the given options is a vector, we must evaluate whether each quantity has both magnitude and direction and, crucially, whether it obeys the laws of vector addition.

    Option A: Current
    Although electric current has a specific direction of flow in a circuit, it is considered a scalar quantity in introductory physics. This is because current does not follow the laws of vector addition. For instance, if two wires carrying current meet at a junction, the total current is simply the algebraic sum of the individual currents, regardless of the angle at which the wires meet.

    Option B: Electrostatic Potential
    Electrostatic potential is defined as the amount of work done per unit charge to move a test charge from a reference point to a specific point in an electric field. Since work and charge are both scalar quantities, electrostatic potential is also a scalar quantity. It represents a level of "electric pressure" at a point rather than a directional force.

    Option C: Charge
    Electric charge is a fundamental property of matter. While it can be positive or negative, these signs represent types of charge rather than spatial directions. Charge does not have a direction in space, making it a scalar quantity.

    Option D: Moment of force
    Moment of force, commonly known as torque, is a measure of the tendency of a force to rotate an object about an axis. It is mathematically defined as the cross product of the position vector \( \vec{r} \) and the force vector \( \vec{F} \):
    \[ \vec{\tau} = \vec{r} \times \vec{F} \]
    Because it is the result of a vector cross product, it has both a magnitude and a specific direction (perpendicular to the plane containing \( \vec{r} \) and \( \vec{F} \)) and follows the rules of vector algebra. Therefore, it is a vector quantity.

    In conclusion, moment of force is the only quantity listed that satisfies the requirements of being a vector.
  4. Q4.

    The product of unit vector with magnitude is 

    1. A)  direction

    2. B)  Vector

    3. C)  magnitude

    4. D) All

    Answer: B

    Okay, let's break down why the correct answer is B) Vector. Here's the explanation: A **unit vector** is a vector with a magnitude (or length) of 1. Think of it as a direction indicator, normalized to have a length of 1. It's a fundamental concept in physics and mathematics, especially when dealing with vector quantities like force, velocity, and displacement. Now, the question asks about the "product of a unit vector with magnitude." This is a bit of a trick question designed to test your understanding of what a unit vector *is*. Let's consider each option: * **A) Direction:** While a unit vector *indicates* a direction, it's not simply "direction." It's a vector *with* a direction. * **B) Vector:** This is the correct answer. A unit vector *is* a vector. It has both magnitude (which is 1) and direction. Multiplying a unit vector by any scalar (a regular number) results in another vector. * **C) Magnitude:** The magnitude of a unit vector is *already* 1. The question asks about the *product* of the unit vector, not its magnitude. * **D) All:** This is incorrect because not all of the options are accurate descriptions of what a unit vector is. **In simpler terms:** Imagine you have a compass needle. The compass needle points in a specific direction (North, South, East, West). A unit vector is like that compass needle, but its length is perfectly standardized to 1 unit. It's still a needle (a vector) – it has both a direction and a length. Therefore, the product of a unit vector with magnitude is a **vector**. \[ \text{Unit Vector} \times \text{Scalar} = \text{Vector} \]
  5. Q5.

    A force of 10 N making an angle of 30º with Y-axis, its horizontal component will be

    1. A)  8.66 N

    2. B)  5 N

    3. C)  7.07 N

    4. D)  None

    Answer: B

    Okay, let's break down this problem step-by-step. The question asks us to find the horizontal component of a force given its magnitude (10 N) and the angle it makes with the Y-axis (30°). Here's the reasoning:
    **Understanding Components of a Force** When a force acts at an angle, it can be resolved into two perpendicular components: a horizontal component and a vertical component. These components represent the force's effect in the x and y directions, respectively.
    **Relating the Angle to the Y-axis** The problem states the angle is with respect to the Y-axis. This is important. We need to find the angle with respect to the X-axis first. Since the X and Y axes are perpendicular, the angle with respect to the X-axis will be 90° - 30° = 60°.
    **Using Trigonometry** We can use trigonometry to find the horizontal component. Specifically, we'll use the cosine function because: * `cos(angle) = Adjacent / Hypotenuse` In this case: * The "Adjacent" side is the horizontal component (what we want to find). * The "Hypotenuse" is the magnitude of the force (10 N). * The "Angle" is the angle with respect to the X-axis (60°).
    **Calculation** Let's write this out mathematically: \[ \text{Horizontal Component} = \text{Force} \times \cos(\text{Angle}) \] \[ \text{Horizontal Component} = 10 \text{ N} \times \cos(60^\circ) \] We know that `cos(60°) = 0.5`. Therefore: \[ \text{Horizontal Component} = 10 \text{ N} \times 0.5 \] \[ \text{Horizontal Component} = 5 \text{ N} \]
    **Conclusion** Therefore, the horizontal component of the force is 5 N. This corresponds to option B.
    **Why other options are incorrect:** * **A) 8.66 N:** This value is related to `sin(30°)`, which would be used to find the *vertical* component, not the horizontal. * **C) 7.07 N:** This is not a relevant value in this calculation. * **D) None:** Since we correctly calculated the horizontal component as 5 N, this option is incorrect.
  6. Q6.

    Which of the following is a scalar quantity?

    1. A) Displacement

    2. B) Velocity

    3. C) Force

    4. D) Work

    Answer: D

    Okay, let's break down why the correct answer is D) Work. Here's the explanation: First, let's understand the difference between scalar and vector quantities. * **Scalar Quantity:** A scalar quantity is a quantity that is fully described by its *magnitude* (size or amount) only. It doesn't have a direction associated with it. Examples include temperature, mass, speed, and energy. * **Vector Quantity:** A vector quantity is a quantity that is described by both its *magnitude* and its *direction*. Examples include displacement, velocity, force, and acceleration. Now, let's look at each option: * **A) Displacement:** Displacement is the change in position of an object. It has both magnitude (the distance between the initial and final points) and direction (from the initial to the final point). Therefore, it's a vector. * **B) Velocity:** Velocity is the rate of change of displacement. It's calculated as displacement over time. Like displacement, it has both magnitude (speed) and direction. So, it's a vector. * **C) Force:** Force is a push or pull on an object. It has both magnitude (how strong the push or pull is) and direction (the direction of the push or pull). Hence, it's a vector. * **D) Work:** Work is defined as the energy transferred when a force causes displacement. The formula for work is: \[ W = F \cdot d \cdot \cos(\theta) \] Where: * $W$ is work * $F$ is the force * $d$ is the displacement * $\theta$ is the angle between the force and displacement vectors. The result of this calculation is a *number* representing the amount of energy transferred. It doesn't inherently have a direction. It's simply a quantity of energy. Therefore, work is a scalar. **Therefore, the correct answer is D) Work because it is a scalar quantity, only having magnitude and no direction.**
    I hope this explanation is clear and helpful! Let me know if you have any other questions.
  7. Q7.

    Which of the following is a vector quantity?

    1. A) Mass

    2. B) Density

    3. C) Momentum

    4. D) Speed

    Answer: C

    Okay, let's break down why momentum is the correct answer and why the others aren't.
    **Understanding Vector and Scalar Quantities** First, it's crucial to understand the difference between vector and scalar quantities. * **Scalar Quantities:** These are quantities that are fully described by their *magnitude* (size) alone. Think of things like temperature, mass, or speed. Just knowing "10 degrees Celsius" or "5 kilograms" or "20 meters per second" tells you everything you need to know. * **Vector Quantities:** These quantities are described by both their *magnitude* and their *direction*. Knowing just the magnitude isn't enough; you need to know *which way* it's acting. Examples include displacement, velocity, force, and momentum.
    **Analyzing the Options** Let's look at each option: * **A) Mass:** Mass is a scalar quantity. It simply tells you how much "stuff" is in an object. A mass of 5 kg doesn't have a direction. * **B) Density:** Density is also a scalar quantity. It's defined as mass per unit volume (ρ = m/V). It doesn't inherently have a direction. * **C) Momentum:** This is the correct answer! Momentum is defined as the product of an object's mass (m) and its velocity (v): \[ \text{Momentum} = p = m \cdot v \] Since velocity is a vector quantity (magnitude *and* direction), momentum is also a vector quantity. It has both a magnitude (how much "oomph" the object has) and a direction (the same direction as the velocity). For example, a ball rolling to the right with a certain speed has a momentum pointing to the right. * **D) Speed:** Speed is the rate at which an object is moving. It's the magnitude of velocity. It's a scalar quantity. Knowing an object is moving at 15 m/s doesn't tell you which way it's going.
    **Therefore, momentum (C) is the only option that is a vector quantity because it depends on both magnitude (mass) and direction (velocity).**
  8. Q8.

    What is the magnitude of the unit vector $\hat{i}$?

    1. A) 0

    2. B) 1

    3. C) 2

    4. D) Undefined

    Answer: B

  9. Q9.

    The sum of two vectors $\vec{A}$ and $\vec{B}$ is found by which method?

    1. A) Head-to-tail rule

    2. B) Parallelogram rule

    3. C) Both A and B

    4. D) Cross product

    Answer: C

    To find the sum of two vectors, \(\vec{A}\) and \(\vec{B}\), physicists and mathematicians use geometric constructions that yield the resultant vector.

    The first method is the Head-to-tail rule (also known as the triangle law). In this method, the tail of vector \(\vec{B}\) is placed at the head of vector \(\vec{A}\). The sum, or resultant vector \(\vec{R}\), is the vector drawn from the tail of the first vector (\(\vec{A}\)) to the head of the second vector (\(\vec{B}\)).

    The second method is the Parallelogram rule. In this approach, both vectors \(\vec{A}\) and \(\vec{B}\) are drawn from a common starting point so that their tails are joined. A parallelogram is then constructed using these two vectors as adjacent sides. The diagonal of the parallelogram that starts from the common tail represents the resultant vector \(\vec{R} = \vec{A} + \vec{B}\).

    Both of these methods are mathematically equivalent and will always produce the same resultant vector in terms of both magnitude and direction. Option D, the cross product, is a method of vector multiplication that results in a vector perpendicular to the plane of the original vectors, and it is not used for addition.

    Therefore, because both the head-to-tail rule and the parallelogram rule are valid techniques for vector addition, the correct answer is Both A and B.

    Vector addition can be performed using either the head-to-tail rule or the parallelogram rule, as both methods correctly determine the resultant vector.
  10. Q10.

    The dot product of two perpendicular vectors is:

    1. A) Maximum

    2. B) Zero

    3. C) Negative

    4. D) Minimum

    Answer: B

    Okay, let's break down why the correct answer is B) Zero when dealing with the dot product of perpendicular vectors. Here's the explanation: The dot product, also known as the scalar product, is a way to multiply two vectors to get a scalar (a single number) result. It's defined as follows: Let's say we have two vectors, **a** and **b**. We can write them as: **a** = < ax, ay, az > **b** = < bx, by, bz > Then, the dot product is: **a** ⋅ **b** = axbx + ayby + azbz
    Now, what happens when two vectors are perpendicular (also called orthogonal)? Perpendicular vectors form a 90-degree angle between them. The key here is the relationship between the angle between the vectors and the dot product. The dot product can *also* be expressed as: **a** ⋅ **b** = |**a**| |**b**| cos(θ) Where: * |**a**| is the magnitude (length) of vector **a** * |**b**| is the magnitude (length) of vector **b** * θ is the angle between the vectors **a** and **b**
    Since **a** and **b** are perpendicular, the angle θ between them is 90 degrees. We know that cos(90°) = 0. Therefore: **a** ⋅ **b** = |**a**| |**b**| * 0 = 0
    So, the dot product of two perpendicular vectors is always zero. Let's look at why the other options are incorrect: * **A) Maximum:** The dot product isn't necessarily at a maximum. It's maximum when the vectors point in the same direction (0-degree angle). * **C) Negative:** The dot product can be negative if the angle between the vectors is greater than 90 degrees. * **D) Minimum:** Similar to "maximum," the dot product isn't necessarily at a minimum. **In summary:** The dot product of perpendicular vectors is zero because the cosine of the angle between them (90 degrees) is zero.
  11. Q11.

    What is the dot product of two parallel vectors?

    1. A) 0

    2. B) $AB\cos\theta$

    3. C) $AB$

    4. D) $AB\sin\theta$

    Answer: C

    Okay, let's break down why the correct answer is C) $AB$. Here's the explanation in a teacher-like style: The dot product, also known as the scalar product, is a way to multiply two vectors to get a scalar (a single number) result. It tells us something about how much the two vectors point in the same direction. Let's recall the formula for the dot product of two vectors, $\vec{A}$ and $\vec{B}$: \[ \vec{A} \cdot \vec{B} = |\vec{A}| |\vec{B}| \cos\theta \] Where: * $|\vec{A}|$ is the magnitude (length) of vector $\vec{A}$. We often just write this as $A$. * $|\vec{B}|$ is the magnitude (length) of vector $\vec{B}$. We often just write this as $B$. * $\theta$ is the angle between the two vectors. Now, the key piece of information in this question is that the vectors are *parallel*. Parallel vectors point in the same direction (or exactly opposite directions). This means the angle between them, $\theta$, is either $0^\circ$ or $180^\circ$. Let's consider both cases: * **Case 1: $\theta = 0^\circ$** (Vectors point in the same direction) In this case, $\cos(0^\circ) = 1$. So, the dot product becomes: \[ \vec{A} \cdot \vec{B} = A \cdot B \cdot 1 = AB \] * **Case 2: $\theta = 180^\circ$** (Vectors point in opposite directions) In this case, $\cos(180^\circ) = -1$. So, the dot product becomes: \[ \vec{A} \cdot \vec{B} = A \cdot B \cdot (-1) = -AB \] Notice that in both cases, the dot product is directly related to the product of the magnitudes of the vectors. However, the options only provide $AB$ as a possible answer. Since the question doesn't specify whether the vectors point in the same or opposite directions, we consider the magnitude of the dot product, which is $|AB|$. In the context of multiple choice, $AB$ is the most appropriate answer. Let's look at why the other options are incorrect: * **A) 0:** The dot product is 0 only when the vectors are *perpendicular* (at a 90-degree angle), not parallel. * **B) $AB\cos\theta$:** This is the general formula for the dot product, but it doesn't simplify to a single value when the vectors are parallel. * **D) $AB\sin\theta$:** This is not the formula for the dot product at all. It resembles a formula for the area of a parallelogram formed by the vectors. Therefore, the dot product of two parallel vectors is $AB$ (or $-AB$ if they point in opposite directions), making option C the correct answer.
  12. Q12.

    The cross product of two parallel vectors is:

    1. A) A null vector

    2. B) Maximum

    3. C) A scalar

    4. D) Negative

    Answer: A

  13. Q13.

    The direction of the cross product of $\vec{A}$ and $\vec{B}$ is given by:

    1. A) Left-hand rule

    2. B) Right-hand rule

    3. C) Fleming's rule

    4. D) Newton's rule

    Answer: B

    The direction of the cross product of two vectors, \(\vec{A}\) and \(\vec{B}\), is determined by the Right-hand rule. This is a fundamental convention used in mathematics and physics to define the orientation of the resulting vector in three-dimensional space.

    When you compute the cross product \(\vec{C} = \vec{A} \times \vec{B}\), the resulting vector \(\vec{C}\) is always perpendicular to the plane containing both \(\vec{A}\) and \(\vec{B}\). To find which way \(\vec{C}\) points along that perpendicular line, you follow these steps using your right hand:
    1. Point your fingers in the direction of the first vector, \(\vec{A}\).
    2. Curl your fingers toward the second vector, \(\vec{B}\), through the smallest angle between them.
    3. Your thumb will then point in the direction of the cross product vector \(\vec{C}\).

    The other options are not applicable here: Fleming's rules are specific to electromagnetic applications (like motors and generators), Newton's rules refer to the laws of motion, and the Left-hand rule is not the standard convention for vector algebra.

    The Right-hand rule provides a consistent and universal method for determining the perpendicular direction of a vector resulting from a cross product.
  14. Q14.

    If $\vec{A} \cdot \vec{B} = 0$, then the angle between vectors $\vec{A}$ and $\vec{B}$ is:

    1. A) $0^\circ$

    2. B) $45^\circ$

    3. C) $90^\circ$

    4. D) $180^\circ$

    Answer: C

  15. Q15.

    The cross product of two vectors $\vec{A}$ and $\vec{B}$ is represented as:

    1. A) $\vec{A} \cdot \vec{B}$

    2. B) $\vec{A} \times \vec{B}$

    3. C) $\vec{A} + \vec{B}$

    4. D) $\vec{A} - \vec{B}$

    Answer: B

  16. Q16.

    Torque is a measure of the turning effect of a force and is given by:

    1. A) $\tau = \vec{r} \cdot \vec{F}$

    2. B) $\tau = \vec{r} \times \vec{F}$

    3. C) $\tau = F/r$

    4. D) $\tau = F \times r$

    Answer: B

  17. Q17.

    The unit of torque in the SI system is:

    1. A) Joule

    2. B) Newton

    3. C) Watt

    4. D) Newton-meter

    Answer: D

  18. Q18.

    The first condition of equilibrium states that:

    1. A) The sum of all forces is zero

    2. B) The sum of all torques is zero

    3. C) The object is at rest

    4. D) The object is moving at constant velocity

    Answer: A

  19. Q19.

    The second condition of equilibrium states that:

    1. A) The sum of all forces is zero

    2. B) The sum of all torques is zero

    3. C) The object is at rest

    4. D) The object is moving with acceleration

    Answer: B

  20. Q20.

    A body is in complete equilibrium if it satisfies:

    1. A) The first condition only

    2. B) The second condition only

    3. C) Both first and second conditions

    4. D) None of these

    Answer: C

  21. Q21.

    The cross product $\hat{i} \times \hat{j}$ is equal to:

    1. A) 0

    2. B) 1

    3. C) $\hat{k}$

    4. D) $-\hat{k}$

    Answer: C

  22. Q22.

    The scalar product of two vectors is commutative, meaning:

    1. A) $\vec{A} \cdot \vec{B} = -\vec{B} \cdot \vec{A}$

    2. B) $\vec{A} \cdot \vec{B} = \vec{B} \cdot \vec{A}$

    3. C) $\vec{A} \times \vec{B} = \vec{B} \times \vec{A}$

    4. D) $\vec{A} + \vec{B} = \vec{B} + \vec{A}$

    Answer: B

  23. Q23.

    The vector product of two vectors is anti-commutative, meaning:

    1. A) $\vec{A} \times \vec{B} = \vec{B} \times \vec{A}$

    2. B) $\vec{A} \times \vec{B} = -\vec{B} \times \vec{A}$

    3. C) $\vec{A} \cdot \vec{B} = \vec{B} \cdot \vec{A}$

    4. D) $\vec{A} \cdot \vec{B} = -\vec{B} \cdot \vec{A}$

    Answer: B

  24. Q24.

    What is the magnitude of a vector $\vec{A} = 3\hat{i} + 4\hat{j}$?

    1. A) 3

    2. B) 4

    3. C) 5

    4. D) 7

    Answer: C

    Okay, let's break down how to find the magnitude of a vector and why the correct answer is C. **Understanding Vector Magnitude** The magnitude of a vector represents its length or size. Think of it as the distance from the starting point of the vector to its endpoint. For a vector in 2D space (like the one given, with components in the $\hat{i}$ and $\hat{j}$ directions), we can use the Pythagorean theorem to calculate the magnitude. **Applying the Pythagorean Theorem** The vector $\vec{A} = 3\hat{i} + 4\hat{j}$ has components: * $A_x = 3$ (the $\hat{i}$ component, representing movement along the x-axis) * $A_y = 4$ (the $\hat{j}$ component, representing movement along the y-axis) The magnitude, denoted as $|\vec{A}|$, is calculated as follows: \[ |\vec{A}| = \sqrt{A_x^2 + A_y^2} \] **Step-by-Step Calculation** Let's plug in the values: 1. **Square the components:** $A_x^2 = 3^2 = 9$ $A_y^2 = 4^2 = 16$ 2. **Add the squares:** $A_x^2 + A_y^2 = 9 + 16 = 25$ 3. **Take the square root:** $|\vec{A}| = \sqrt{25} = 5$ **Therefore, the magnitude of the vector $\vec{A} = 3\hat{i} + 4\hat{j}$ is 5.** **Why the other options are incorrect:** * **A) 3:** This is just the x-component of the vector, not the magnitude. * **B) 4:** This is just the y-component of the vector, not the magnitude. * **D) 7:** This is the sum of the components (3 + 4), but not the magnitude. It's a common mistake to add the components directly, but that doesn't give you the length of the vector. So, option C (5) is the only one that correctly represents the magnitude of the vector.
  25. Q25.

    The resolved component of a vector $\vec{A}$ along the x-axis is given by:

    1. A) $A\sin\theta$

    2. B) $A\cos\theta$

    3. C) $A\tan\theta$

    4. D) $\sqrt{A_x^2 + A_y^2}$

    Answer: B

  26. Q26.

    The angle of a vector $\vec{A}$ with the x-axis is given by:

    1. A) $\theta = \tan^{-1}(A_x/A_y)$

    2. B) $\theta = \tan^{-1}(A_y/A_x)$

    3. C) $\theta = \cos^{-1}(A_y/A)$

    4. D) $\theta = \sin^{-1}(A_x/A)$

    Answer: B

  27. Q27.

    Two forces $\vec{F_1}$ and $\vec{F_2}$ are applied on a body. The body is in equilibrium if:

    1. A) $\vec{F_1} = \vec{F_2}$

    2. B) $\vec{F_1} = -\vec{F_2}$

    3. C) $\vec{F_1} + \vec{F_2} \neq 0$

    4. D) $\vec{F_1} \cdot \vec{F_2} = 0$

    Answer: B

  28. Q28.

    A body is in static equilibrium when:

    1. A) It is moving with constant velocity

    2. B) It is at rest

    3. C) Its acceleration is non-zero

    4. D) It is rotating

    Answer: B

  29. Q29.

    A body is in dynamic equilibrium when:

    1. A) It is at rest

    2. B) It is moving with constant velocity

    3. C) It is accelerating

    4. D) It is rotating with constant angular velocity

    Answer: B

  30. Q30.

    The position vector of a point $(x, y, z)$ is given by:

    1. A) $x\hat{i} + y\hat{j}$

    2. B) $y\hat{j} + z\hat{k}$

    3. C) $x\hat{i} + y\hat{j} + z\hat{k}$

    4. D) $x+y+z$

    Answer: C

  31. Q31.

    The magnitude of the torque is given by:

    1. A) $rF$

    2. B) $rF\sin\theta$

    3. C) $rF\cos\theta$

    4. D) $rF\tan\theta$

    Answer: B

  32. Q32.

    The point about which a force causes a turning effect is called the:

    1. A) Point of application

    2. B) Pivot

    3. C) Axis of rotation

    4. D) Origin

    Answer: C

  33. Q33.

    What is the condition for a body to be in rotational equilibrium?

    1. A) $\sum \vec{F} = 0$

    2. B) $\sum \vec{\tau} = 0$

    3. C) $\vec{P} = 0$

    4. D) $\vec{L} = 0$

    Answer: B

  34. Q34.

    A pair of forces equal in magnitude but opposite in direction and not acting along the same line is called a:

    1. A) Net force

    2. B) Couple

    3. C) Resultant force

    4. D) Equilibrium force

    Answer: B

    Okay, let's break down why the correct answer is B) Couple. Here's the explanation in a teacher-like style: Imagine you're trying to open a door. You don't just push on the door in one spot, right? You push on the handle, and often someone else might push on the other side. These pushes are equal in strength (magnitude) but point in opposite directions. Crucially, they don't act along the same line – they're on opposite sides of the door. This causes the door to *rotate*. That's exactly what a "couple" is!
    Let's look at why the other options are incorrect: * **A) Net force:** The net force is the *sum* of all forces acting on an object. If forces are equal and opposite, the net force *could* be zero, but that's not the defining characteristic of a couple. A couple *always* produces a torque (rotational effect).
    * **C) Resultant force:** The resultant force is similar to the net force – it's the single force that would have the same effect as all the individual forces. Again, equal and opposite forces can result in a zero resultant force, but that doesn't describe a couple.
    * **D) Equilibrium force:** Equilibrium means an object is at rest or moving with constant velocity. It doesn't specifically describe a pair of forces with the properties mentioned in the question. **In essence:** A couple is a specific type of force application that creates rotation. It's defined by equal and opposite forces *not* acting along the same line. **To illustrate with a simple example:** Consider two forces, each with a magnitude of 10 Newtons (N). * Force 1: 10 N upwards * Force 2: 10 N downwards If these forces act at the *same* point, they cancel each other out (net force = 0). But if they act at *different* points, say 0.5 meters apart, they create a torque, causing rotation. This is a couple. \[ \tau = F \cdot d \] Where: * τ (tau) is the torque * F is the force (10 N in this case) * d is the distance between the forces (0.5 m in this case) Therefore, the torque (and the rotational effect) is: \[ \tau = 10 \text{ N} \cdot 0.5 \text{ m} = 5 \text{ N}\cdot\text{m} \] This demonstrates how a couple produces a torque.
    I hope this explanation clarifies why "Couple" is the correct answer!
  35. Q35.

    The moment arm is the perpendicular distance from the axis of rotation to the:

    1. A) Point of application

    2. B) Line of action of the force

    3. C) Center of mass

    4. D) Point of origin

    Answer: B

  36. Q36.

    What is the magnitude of the resultant of two forces, $F_1$ and $F_2$, acting at a right angle?

    1. A) $F_1 + F_2$

    2. B) $F_1^2 + F_2^2$

    3. C) $\sqrt{F_1^2 + F_2^2}$

    4. D) $F_1 F_2$

    Answer: C

  37. Q37.

    The magnitude of the resultant of two vectors $\vec{A}$ and $\vec{B}$ is given by:

    1. A) $\sqrt{A^2 + B^2}$

    2. B) $\sqrt{A^2 + B^2 + 2AB\cos\theta}$

    3. C) $A + B$

    4. D) $\sqrt{A^2 + B^2 - 2AB\cos\theta}$

    Answer: B

    Okay, let's break down why option B is the correct answer for finding the magnitude of the resultant of two vectors. **Understanding Vector Addition** When you add vectors, you're not just adding their magnitudes (lengths). You need to consider both their magnitudes *and* the angle between them. The resultant vector is the single vector that represents the sum of the two original vectors. Its magnitude is the length of this resultant vector. **The Law of Cosines** The correct formula for the magnitude of the resultant vector, let's call it `R`, is derived from the Law of Cosines. The Law of Cosines is a generalization of the Pythagorean theorem and is useful for finding sides of a triangle when you don't have a right angle. Let's visualize this: Imagine vectors $\vec{A}$ and $\vec{B}$ placed head-to-tail. The resultant vector $\vec{R}$ goes from the tail of $\vec{A}$ to the head of $\vec{B}$. This forms a triangle with sides $A$, $B$, and $R$, and the angle opposite side $R$ is $\theta$ (the angle between vectors $\vec{A}$ and $\vec{B}$). Applying the Law of Cosines to this triangle, we get: \[ R^2 = A^2 + B^2 - 2AB\cos\theta \] Where: * $R$ is the magnitude of the resultant vector. * $A$ is the magnitude of vector $\vec{A}$. * $B$ is the magnitude of vector $\vec{B}$. * $\theta$ is the angle between vectors $\vec{A}$ and $\vec{B}$. **Finding the Magnitude (R)** To find the magnitude of the resultant vector ($R$), we take the square root of both sides of the equation: \[ R = \sqrt{A^2 + B^2 - 2AB\cos\theta} \] **Why the other options are incorrect:** * **A) $\sqrt{A^2 + B^2}$:** This is only correct if the vectors are perpendicular (i.e., $\theta = 90^\circ$). In that case, $\cos\theta = 0$, and the formula simplifies to this. But it's not generally true for all angles. * **C) $A + B$:** This is the magnitude of the resultant *only* if the vectors are acting in the same direction. It's a scalar addition, not a vector addition. * **D) $\sqrt{A^2 + B^2 - 2AB\cos\theta}$:** This is incorrect. The sign in front of the $2AB\cos\theta$ term is wrong. The correct formula includes a negative sign. Therefore, option B, $\sqrt{A^2 + B^2 - 2AB\cos\theta}$, is the correct formula for the magnitude of the resultant of two vectors.
  38. Q38.

    What is the value of $\hat{i} \cdot \hat{i}$?

    1. A) 0

    2. B) 1

    3. C) $\hat{i}$

    4. D) $-\hat{i}$

    Answer: B

  39. Q39.

    What is the value of $\hat{i} \times \hat{i}$?

    1. A) 0

    2. B) 1

    3. C) $\hat{j}$

    4. D) Null vector

    Answer: D

    Okay, let's break down why the correct answer is D) Null vector. The question asks us to find the cross product of the unit vector $\hat{i}$ with itself, i.e., $\hat{i} \times \hat{i}$. Let's recall what the cross product represents and how it works. The cross product of two vectors results in a new vector that is perpendicular to both original vectors. The magnitude of the resulting vector is related to the magnitudes of the original vectors and the angle between them. In this case, we're taking the cross product of $\hat{i}$ with itself. This means the two vectors are identical, and the angle between them is 0 degrees. Let's use the formula for the cross product in terms of components. In 3D Cartesian coordinates, we have: \[ \vec{a} \times \vec{b} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \\ a_x & a_y & a_z \\ b_x & b_y & b_z \end{vmatrix} \] Since $\hat{i} = (1, 0, 0)$ and $\hat{i} = (1, 0, 0)$, we can write: \[ \hat{i} \times \hat{i} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \\ 1 & 0 & 0 \\ 1 & 0 & 0 \end{vmatrix} \] Expanding the determinant, we get: \[ \hat{i}(0 \cdot 0 - 0 \cdot 0) - \hat{j}(1 \cdot 0 - 0 \cdot 1) + \hat{k}(1 \cdot 0 - 0 \cdot 1) = \hat{i}(0) - \hat{j}(0) + \hat{k}(0) = 0\hat{i} - 0\hat{j} + 0\hat{k} = (0, 0, 0) \] The result is the zero vector, also known as the null vector. This is because when you cross two parallel vectors (including a vector with itself), the resulting vector has zero length and points in no particular direction. Therefore, $\hat{i} \times \hat{i} = \text{Null vector}$. **Why other options are incorrect:** * **A) 0:** While the magnitude of the resulting vector is 0, 0 is a scalar value, not a vector. The cross product *always* results in a vector. * **B) 1:** This is simply incorrect; the cross product doesn't produce a scalar value of 1. * **C) $\hat{j}$:** The cross product of $\hat{i}$ and $\hat{i}$ is not $\hat{j}$. $\hat{j}$ would be the result of $\hat{i} \times \hat{k}$ or $\hat{k} \times \hat{j}$, for example. I hope this explanation is clear and helpful! Let me know if you have any other questions.
  40. Q40.

    If the resultant of all forces acting on a body is zero, then the body is in:

    1. A) Linear equilibrium

    2. B) Rotational equilibrium

    3. C) Both linear and rotational equilibrium

    4. D) None of these

    Answer: A

  41. Q41.

    Which of the following is an example of a scalar product?

    1. A) Force

    2. B) Velocity

    3. C) Work

    4. D) Torque

    Answer: C

  42. Q42.

    Which of the following is an example of a vector product?

    1. A) Power

    2. B) Work

    3. C) Torque

    4. D) Energy

    Answer: C

  43. Q43.

    The cross product of two vectors is maximum when the angle between them is:

    1. A) $0^\circ$

    2. B) $45^\circ$

    3. C) $90^\circ$

    4. D) $180^\circ$

    Answer: C

  44. Q44.

    The dot product of two vectors is maximum when the angle between them is:

    1. A) $0^\circ$

    2. B) $45^\circ$

    3. C) $90^\circ$

    4. D) $180^\circ$

    Answer: A

  45. Q45.

    What is the magnitude of a null vector?

    1. A) 1

    2. B) Infinity

    3. C) Zero

    4. D) Depends on the vector

    Answer: C

  46. Q46.

    Vector subtraction $\vec{A} - \vec{B}$ is equivalent to:

    1. A) $\vec{A} + (-\vec{B})$

    2. B) $\vec{A} + \vec{B}$

    3. C) $\vec{A} \times \vec{B}$

    4. D) $\vec{B} - \vec{A}$

    Answer: A

  47. Q47.

    The law of sines for vector addition is used for:

    1. A) Finding the direction of a vector

    2. B) Finding the magnitude of a vector

    3. C) Solving for forces in equilibrium

    4. D) All of these

    Answer: C

  48. Q48.

    What is the component of a vector $\vec{A}$ along the y-axis?

    1. A) $A\sin\theta$

    2. B) $A\cos\theta$

    3. C) $A\tan\theta$

    4. D) $\sqrt{A_x^2 - A_y^2}$

    Answer: A

  49. Q49.

    The direction of a vector is given by:

    1. A) Its magnitude

    2. B) A unit vector

    3. C) The angle it makes with an axis

    4. D) Both B and C

    Answer: D

    To understand how the direction of a vector is defined, we must look at the standard mathematical and physical representations of vector quantities.
    1. Unit Vector (Option B):
    A unit vector is a vector that has a magnitude of exactly 1. Its sole purpose is to specify a direction in space. For any non-zero vector \(\vec{A}\), the unit vector \(\hat{a}\) in the same direction is defined as: \[ \hat{a} = \frac{\vec{A}}{|\vec{A}|} \] By dividing the vector by its own magnitude, we are left with a value of 1 that points exactly where the original vector was pointing. Therefore, a unit vector is a primary way to give the direction of a vector.
    2. Angle with an Axis (Option C):
    In a coordinate system (such as the Cartesian plane), the direction of a vector is often described by the angle \(\theta\) it makes with a reference axis, typically the positive x-axis. For a vector with components \(V_x\) and \(V_y\), the direction is given by: \[ \theta = \tan^{-1}\left(\frac{V_y}{V_x}\right) \] This angular measurement provides a clear geometric orientation of the vector.
    3. Magnitude (Option A):
    Magnitude refers only to the size, length, or strength of the vector. It is a scalar quantity and contains no information regarding which way the vector is pointing. Thus, magnitude alone cannot give the direction.
    Because both a unit vector and the angle made with an axis are valid methods for defining orientation, the correct answer is Option D.
    The direction of a vector is effectively communicated through either its unit vector or the specific angle it forms relative to a coordinate axis.
  50. Q50.

    If the resultant of two vectors is maximum, they are acting:

    1. A) At $90^\circ$ to each other

    2. B) At $180^\circ$ to each other

    3. C) In the same direction

    4. D) In opposite directions

    Answer: C

  51. Q51.

    A couple produces only:

    1. A) Linear motion

    2. B) Rotational motion

    3. C) Both linear and rotational motion

    4. D) No motion

    Answer: B

  52. Q52.

    The moment of a couple is the product of one of the forces and:

    1. A) The perpendicular distance between them

    2. B) The sum of the forces

    3. C) The angle between them

    4. D) The point of application

    Answer: A

  53. Q53.

    A body in equilibrium can have a non-zero:

    1. A) Velocity

    2. B) Acceleration

    3. C) Net force

    4. D) Net torque

    Answer: A

  54. Q54.

    Which of the following is true for an object in dynamic equilibrium?

    1. A) $\sum \vec{F} \neq 0$

    2. B) $\sum \vec{F} = 0$ and $\sum \vec{\tau} = 0$

    3. C) Velocity is zero

    4. D) Acceleration is non-zero

    Answer: B

  55. Q55.

    The condition $\sum \vec{F} = 0$ implies:

    1. A) No acceleration

    2. B) No net force

    3. C) Constant velocity

    4. D) All of the above

    Answer: D

    The condition \( \sum \vec{F} = 0 \) is a fundamental principle in physics that describes a state of translational equilibrium. To understand why all the options are correct, we must look at the relationship between force, mass, and motion.

    1. No net force: The notation \( \sum \vec{F} \) represents the vector sum of all external forces acting on an object. When this sum equals zero, it means that all the individual forces (such as gravity, friction, or applied forces) cancel each other out. Therefore, the term net force is zero by definition.

    2. No acceleration: According to Newton's Second Law of Motion, the net force acting on an object is equal to the product of its mass and its acceleration: \[ \sum \vec{F} = m\vec{a} \] If the net force \( \sum \vec{F} \) is zero, then the equation becomes \( 0 = m\vec{a} \). Since mass (\( m \)) is a non-zero property of matter, the acceleration (\( \vec{a} \)) must be zero. This means the object is not speeding up, slowing down, or changing direction.

    3. Constant velocity: Acceleration is defined as the rate of change of velocity over time. If the acceleration is zero, the velocity does not change. An object with zero acceleration will either remain at rest (velocity = 0) or continue to move in a straight line at a steady speed. In both cases, the velocity is considered constant.

    Because each of these statements describes a different aspect of the same physical state, they are all logical consequences of the condition \( \sum \vec{F} = 0 \).

    In summary, when the sum of all forces is zero, the object experiences no net force and no acceleration, resulting in a constant velocity.
  56. Q56.

    The dot product of a vector with itself is equal to:

    1. A) Its magnitude

    2. B) The square of its magnitude

    3. C) A null vector

    4. D) Zero

    Answer: B

  57. Q57.

    The cross product of a vector with itself is:

    1. A) A scalar quantity

    2. B) A null vector

    3. C) Its magnitude squared

    4. D) Unity

    Answer: B

  58. Q58.

    Which of the following is a scalar?

    1. A) Electric field

    2. B) Magnetic flux

    3. C) Magnetic field

    4. D) Gravitational force

    Answer: B

  59. Q59.

    If $\vec{A} = 2\hat{i} + 3\hat{j} - \hat{k}$ and $\vec{B} = 4\hat{i} + 6\hat{j} - 2\hat{k}$, then $\vec{A}$ and $\vec{B}$ are:

    1. A) Perpendicular

    2. B) Parallel

    3. C) Equal

    4. D) Orthogonal

    Answer: B

    Okay, let's break down why the correct answer is B) Parallel. Here's the explanation: To determine if two vectors, $\vec{A}$ and $\vec{B}$, are parallel, perpendicular (orthogonal), or neither, we need to examine their relationship. The key lies in the dot product and scalar multiplication. **1. Parallel Vectors:** Two vectors are parallel if one is a scalar multiple of the other. This means that $\vec{B} = k\vec{A}$ for some scalar *k*. Let's check if this is the case here. **2. Perpendicular/Orthogonal Vectors:** Two vectors are perpendicular (or orthogonal) if their dot product is zero. The dot product is calculated as: $\vec{A} \cdot \vec{B} = A_x B_x + A_y B_y + A_z B_z$. **3. Equal Vectors:** Two vectors are equal if their corresponding components are equal (i.e., $A_x = B_x$, $A_y = B_y$, and $A_z = B_z$). Now, let's apply these concepts to our problem: $\vec{A} = 2\hat{i} + 3\hat{j} - \hat{k}$ $\vec{B} = 4\hat{i} + 6\hat{j} - 2\hat{k}$ **Checking for Parallelism:** Let's see if we can find a scalar *k* such that $\vec{B} = k\vec{A}$. $4\hat{i} + 6\hat{j} - 2\hat{k} = k(2\hat{i} + 3\hat{j} - \hat{k})$ This gives us the following equations: * $4 = 2k$ * $6 = 3k$ * $-2 = -k$ Solving for *k* in each equation: * $k = \frac{4}{2} = 2$ * $k = \frac{6}{3} = 2$ * $k = 2$ Since we get *k* = 2 in all three equations, we can conclude that $\vec{B} = 2\vec{A}$. Therefore, $\vec{A}$ and $\vec{B}$ are parallel. **Checking for Perpendicularity:** Let's calculate the dot product: $\vec{A} \cdot \vec{B} = (2)(4) + (3)(6) + (-1)(-2) = 8 + 18 + 2 = 28$ Since the dot product is 28 (not zero), the vectors are *not* perpendicular. **Checking for Equality:** Clearly, the components of $\vec{A}$ and $\vec{B}$ are not all equal. For example, $A_x = 2$ and $B_x = 4$. Therefore, the vectors are *not* equal. **Conclusion:** Since $\vec{B}$ is a scalar multiple of $\vec{A}$, the vectors are parallel. Options A (Perpendicular), C (Equal), and D (Orthogonal) are incorrect. Therefore, the correct answer is B) Parallel.
  60. Q60.

    The resultant of a 5 N force along the x-axis and a 12 N force along the y-axis has a magnitude of:

    1. A) 17 N

    2. B) 13 N

    3. C) 7 N

    4. D) 10 N

    Answer: B

    Okay, let's break down why the correct answer is 13 N. This problem deals with vector addition, specifically finding the magnitude of the resultant force when you have forces acting along perpendicular axes (x and y). Here's the reasoning: Imagine a right triangle. The 5 N force acts along the x-axis, and the 12 N force acts along the y-axis. These two forces are at a 90-degree angle to each other. The *resultant force* is the single force that would have the same effect as both forces acting together. It's the hypotenuse of our right triangle. We can use the Pythagorean theorem to find the magnitude (length) of the hypotenuse (resultant force). The Pythagorean theorem states: \[ a^2 + b^2 = c^2 \] Where: * `a` and `b` are the lengths of the two shorter sides of the right triangle (in our case, the forces 5 N and 12 N). * `c` is the length of the hypotenuse (the resultant force). Let's plug in our values: \[ 5^2 + 12^2 = c^2 \] \[ 25 + 144 = c^2 \] \[ 169 = c^2 \] Now, we need to find the square root of 169 to find `c`: \[ c = \sqrt{169} \] \[ c = 13 \] Therefore, the magnitude of the resultant force is 13 N. That's why option B is the correct answer.
    The other options are incorrect because they don't follow from the Pythagorean theorem applied to these specific force values.
  61. Q61.

    The torque produced by a force is maximum when the force is applied:

    1. A) Along the axis of rotation

    2. B) Perpendicular to the position vector

    3. C) Parallel to the position vector

    4. D) At $45^\circ$ to the position vector

    Answer: B

  62. Q62.

    A body in stable equilibrium returns to its original position after a slight displacement. This means its center of gravity is:

    1. A) Raised

    2. B) Lowered

    3. C) Unchanged

    4. D) Shifted horizontally

    Answer: A

  63. Q63.

    A body in unstable equilibrium has its center of gravity:

    1. A) Raised when displaced

    2. B) Lowered when displaced

    3. C) Unchanged

    4. D) At the lowest point

    Answer: B

  64. Q64.

    What is the angle between $\hat{i} + \hat{j}$ and $\hat{i} - \hat{j}$?

    1. A) $0^\circ$

    2. B) $45^\circ$

    3. C) $90^\circ$

    4. D) $180^\circ$

    Answer: C

    Okay, let's break down why the correct answer is $90^\circ$. Here's the reasoning, explained step-by-step: We're asked to find the angle between two vectors: $\vec{v} = \hat{i} + \hat{j}$ and $\vec{w} = \hat{i} - \hat{j}$. We can use the dot product formula to find this angle. The dot product of two vectors is defined as: \[ \vec{v} \cdot \vec{w} = ||\vec{v}|| \cdot ||\vec{w}|| \cdot \cos(\theta) \] Where: * $\vec{v} \cdot \vec{w}$ is the dot product of $\vec{v}$ and $\vec{w}$. * $||\vec{v}||$ is the magnitude of $\vec{v}$. * $||\vec{w}||$ is the magnitude of $\vec{w}$. * $\theta$ is the angle between the two vectors. Let's calculate each part: **1. Calculate the dot product $\vec{v} \cdot \vec{w}$:** The dot product of two vectors $\vec{a} = a_1\hat{i} + a_2\hat{j}$ and $\vec{b} = b_1\hat{i} + b_2\hat{j}$ is given by: \[ \vec{a} \cdot \vec{b} = a_1b_1 + a_2b_2 \] So, for our vectors: \[ \vec{v} \cdot \vec{w} = (\hat{i} + \hat{j}) \cdot (\hat{i} - \hat{j}) = (1)(1) + (1)(-1) = 1 - 1 = 0 \] **2. Calculate the magnitudes $||\vec{v}||$ and $||\vec{w}||$:** The magnitude of a vector $\vec{a} = a_1\hat{i} + a_2\hat{j}$ is given by: \[ ||\vec{a}|| = \sqrt{a_1^2 + a_2^2} \] So, \[ ||\vec{v}|| = \sqrt{1^2 + 1^2} = \sqrt{1 + 1} = \sqrt{2} \] and \[ ||\vec{w}|| = \sqrt{1^2 + (-1)^2} = \sqrt{1 + 1} = \sqrt{2} \] **3. Solve for $\theta$:** Now, we plug these values into the dot product formula: \[ 0 = \sqrt{2} \cdot \sqrt{2} \cdot \cos(\theta) \] \[ 0 = 2 \cdot \cos(\theta) \] \[ \cos(\theta) = 0 \] The angle $\theta$ for which $\cos(\theta) = 0$ is $90^\circ$. Therefore, the angle between the vectors $\hat{i} + \hat{j}$ and $\hat{i} - \hat{j}$ is $90^\circ$. This corresponds to option C.
    **In simpler terms:** Notice that the vectors $\hat{i} + \hat{j}$ and $\hat{i} - \hat{j}$ are perpendicular to each other. One points along the line $y=x$ and the other points along the line $y=-x$. Perpendicular lines form a $90^\circ$ angle.
  65. Q65.

    The value of $\hat{k} \times \hat{j}$ is:

    1. A) 0

    2. B) 1

    3. C) $\hat{i}$

    4. D) $-\hat{i}$

    Answer: D

  66. Q66.

    If $\vec{A} \cdot \vec{B} = AB$, then the angle between $\vec{A}$ and $\vec{B}$ is:

    1. A) $0^\circ$

    2. B) $45^\circ$

    3. C) $90^\circ$

    4. D) $180^\circ$

    Answer: A

  67. Q67.

    A uniform rod is in equilibrium. The sum of clockwise torques about any point is equal to:

    1. A) The sum of anticlockwise torques

    2. B) Zero

    3. C) The applied force

    4. D) The net force

    Answer: A

  68. Q68.

    The concept of center of gravity is closely related to the concept of:

    1. A) Center of mass

    2. B) Centroid

    3. C) Center of rotation

    4. D) Point of application

    Answer: A

  69. Q69.

    A quantity that has magnitude but no direction is called a:

    1. A) Vector

    2. B) Scalar

    3. C) Tensor

    4. D) Null vector

    Answer: B

  70. Q70.

    The vector product is also known as:

    1. A) Scalar product

    2. B) Cross product

    3. C) Dot product

    4. D) Component product

    Answer: B

  71. Q71.

    The scalar product is also known as:

    1. A) Cross product

    2. B) Dot product

    3. C) Vector product

    4. D) Null product

    Answer: B

  72. Q72.

    The resultant of forces is a single force that:

    1. A) Produces no effect

    2. B) Has the same effect as all forces combined

    3. C) Causes a turning effect

    4. D) Is equal to the sum of magnitudes

    Answer: B

  73. Q73.

    Resolution of a vector is the process of splitting it into:

    1. A) Two components

    2. B) Multiple components

    3. C) Its rectangular components

    4. D) Both B and C

    Answer: D

  74. Q74.

    A physical quantity whose direction is opposite to its magnitude is a:

    1. A) Scalar

    2. B) Vector

    3. C) Null vector

    4. D) Unit vector

    Answer: B

    To understand this question, we must first distinguish between the different types of physical quantities based on their properties.

    1. Scalar Quantities: A scalar is a quantity that is defined solely by its magnitude (size) and has no direction associated with it. Examples include mass, temperature, and time. Since scalars lack direction entirely, the concept of having a direction "opposite" to anything does not apply to them.

    2. Vector Quantities: A vector is a quantity that is defined by both a magnitude and a specific direction. In physics and mathematics, the direction of a vector is an intrinsic part of its identity. If we have a vector \(\vec{A}\), we can define an opposite vector \(-\vec{A}\) which has the same magnitude but points in the exactly opposite direction. The phrasing in the question refers to the fact that only a vector possesses a directional component that can be oriented or reversed relative to its magnitude.

    3. Null and Unit Vectors: A null vector (or zero vector) has a magnitude of zero and its direction is technically indeterminate or arbitrary. A unit vector is a vector that has a magnitude of exactly one and is used primarily to indicate a specific direction. While these are types of vectors, the most general term for a physical quantity that incorporates direction alongside magnitude is simply a vector.

    Therefore, because a vector is the only quantity listed that possesses a direction that can be defined or reversed, it is the correct answer.

    In conclusion, a vector is a physical quantity characterized by having both a magnitude and a specific direction.
  75. Q75.

    The magnitude of a vector $\vec{A}$ is given by:

    1. A) $A_x + A_y$

    2. B) $\sqrt{A_x^2 + A_y^2}$

    3. C) $A_x A_y$

    4. D) $A_x/A_y$

    Answer: B

  76. Q76.

    The condition for equilibrium of a body in two dimensions is:

    1. A) $\sum F_x = 0$ only

    2. B) $\sum F_y = 0$ only

    3. C) $\sum F_x = 0$ and $\sum F_y = 0$

    4. D) $\sum F_x = 0$, $\sum F_y = 0$, and $\sum \tau = 0$

    Answer: D

  77. Q77.

    If the resultant of two vectors $\vec{A}$ and $\vec{B}$ is a vector $\vec{R}$, and $R=A+B$, the angle between $\vec{A}$ and $\vec{B}$ is:

    1. A) $0^\circ$

    2. B) $90^\circ$

    3. C) $180^\circ$

    4. D) $45^\circ$

    Answer: A

  78. Q78.

    The law of cosines for vector addition is given by:

    1. A) $R^2 = A^2 + B^2$

    2. B) $R^2 = A^2 + B^2 + 2AB\cos\theta$

    3. C) $R^2 = A^2 + B^2 - 2AB\cos\theta$

    4. D) $R = \sqrt{A^2 + B^2}$

    Answer: B

  79. Q79.

    A body in neutral equilibrium has its center of gravity:

    1. A) Raised upon displacement

    2. B) Lowered upon displacement

    3. C) At the same height upon displacement

    4. D) None of these

    Answer: C

  80. Q80.

    The scalar product of $\vec{A} = 2\hat{i} + 3\hat{j}$ and $\vec{B} = 4\hat{i} - 5\hat{j}$ is:

    1. A) 23

    2. B) -7

    3. C) 8

    4. D) 15

    Answer: B

  81. Q81.

    The vector product of $\vec{A} = 2\hat{i}$ and $\vec{B} = 3\hat{j}$ is:

    1. A) $6\hat{k}$

    2. B) $-6\hat{k}$

    3. C) 6

    4. D) 0

    Answer: A

  82. Q82.

    What is the angle between force and position vector for zero torque?

    1. A) $0^\circ$

    2. B) $90^\circ$

    3. C) $180^\circ$

    4. D) Both A and C

    Answer: D

  83. Q83.

    The direction of a vector product $\vec{A} \times \vec{B}$ is perpendicular to:

    1. A) Vector $\vec{A}$ only

    2. B) Vector $\vec{B}$ only

    3. C) Both vectors $\vec{A}$ and $\vec{B}$

    4. D) The plane containing $\vec{A}$ and $\vec{B}$

    Answer: D

  84. Q84.

    A physical quantity that has both magnitude and direction is called a:

    1. A) Scalar

    2. B) Vector

    3. C) Unit

    4. D) Constant

    Answer: B

  85. Q85.

    The magnitude of the cross product of two vectors is given by:

    1. A) $AB\cos\theta$

    2. B) $AB\sin\theta$

    3. C) $A+B$

    4. D) $AB$

    Answer: B

  86. Q86.

    The magnitude of the dot product of two vectors is given by:

    1. A) $AB\sin\theta$

    2. B) $AB\cos\theta$

    3. C) $A-B$

    4. D) $AB$

    Answer: B

  87. Q87.

    Which of the following statements is true for a scalar product?

    1. A) It is a vector

    2. B) It is a scalar

    3. C) Its value depends on the origin

    4. D) It is non-commutative

    Answer: B

  88. Q88.

    Which of the following is an example of a scalar quantity?

    1. A) Displacement

    2. B) Momentum

    3. C) Electric potential

    4. D) Force

    Answer: C

  89. Q89.

    The angle between a vector and its negative is:

    1. A) $0^\circ$

    2. B) $90^\circ$

    3. C) $180^\circ$

    4. D) $360^\circ$

    Answer: C

  90. Q90.

    The components of a vector $\vec{A}$ are $A_x$ and $A_y$. The vector can be written as:

    1. A) $\vec{A} = A_x + A_y$

    2. B) $\vec{A} = A_x\hat{i} + A_y\hat{j}$

    3. C) $\vec{A} = A_x \hat{i} + A_y$

    4. D) $\vec{A} = A_x \hat{j} + A_y \hat{i}$

    Answer: B

  91. Q91.

    The moment of inertia is an analogue of:

    1. A) Force

    2. B) Mass

    3. C) Momentum

    4. D) Velocity

    Answer: B

  92. Q92.

    The SI unit of force is Newton (N), which is equivalent to:

    1. A) $kg \cdot m/s$

    2. B) $kg \cdot m/s^2$

    3. C) $kg \cdot m^2/s$

    4. D) $kg \cdot m/s^3$

    Answer: B

  93. Q93.

    A vector that gives the position of a point with respect to the origin is called:

    1. A) Displacement vector

    2. B) Unit vector

    3. C) Position vector

    4. D) Null vector

    Answer: C

  94. Q94.

    In the head-to-tail rule, the resultant vector is drawn from the tail of the first vector to the:

    1. A) Tail of the last vector

    2. B) Head of the last vector

    3. C) Head of the first vector

    4. D) Tail of the resultant vector

    Answer: B

  95. Q95.

    A body is in rotational equilibrium if the net torque is zero. This means:

    1. A) It is at rest

    2. B) Its angular acceleration is zero

    3. C) Its linear acceleration is zero

    4. D) Both A and B

    Answer: B

  96. Q96.

    The condition for equilibrium, $\sum \vec{F} = 0$, is a statement of Newton's:

    1. A) First law

    2. B) Second law

    3. C) Third law

    4. D) Law of gravitation

    Answer: A

  97. Q97.

    The dot product of $\vec{A} = 2\hat{i} + 3\hat{j} + \hat{k}$ and $\vec{B} = \hat{i} - \hat{j} - \hat{k}$ is:

    1. A) 2

    2. B) -2

    3. C) -1

    4. D) -3

    Answer: B

    Okay, let's break down why the correct answer is B) -2. The dot product (also known as the scalar product) of two vectors is a way to multiply them together to get a *scalar* (a single number) rather than another vector. It's calculated by multiplying corresponding components of the vectors and then summing those products. Here's how we apply that to our problem: We have $\vec{A} = 2\hat{i} + 3\hat{j} + \hat{k}$ and $\vec{B} = \hat{i} - \hat{j} - \hat{k}$. Let's represent these vectors as ordered triples: $\vec{A} = (2, 3, 1)$ and $\vec{B} = (1, -1, -1)$. The dot product, denoted by $\vec{A} \cdot \vec{B}$, is calculated as follows: \[ \vec{A} \cdot \vec{B} = (2)(1) + (3)(-1) + (1)(-1) \] Now, let's perform the multiplications: \[ \vec{A} \cdot \vec{B} = 2 - 3 - 1 \] Finally, let's sum the results: \[ \vec{A} \cdot \vec{B} = -2 \] Therefore, the dot product of $\vec{A}$ and $\vec{B}$ is -2. This matches option B.
    So, the correct answer is B) -2. We calculated it step-by-step by multiplying corresponding components and summing the results.
  98. Q98.

    A vector whose magnitude is one is called a:

    1. A) Null vector

    2. B) Unit vector

    3. C) Position vector

    4. D) Resultant vector

    Answer: B

  99. Q99.

    Which of the following is not a property of a vector?

    1. A) It has a magnitude

    2. B) It has a direction

    3. C) It can be multiplied by a scalar

    4. D) It can be divided by a scalar

    Answer: D

  100. Q100.

    The number of rectangular components of a vector in 3D is:

    1. A) 1

    2. B) 2

    3. C) 3

    4. D) 4

    Answer: C

  101. Q101.

    The scalar product of a vector with a null vector is:

    1. A) The magnitude of the vector

    2. B) Zero

    3. C) A null vector

    4. D) Unity

    Answer: B

  102. Q102.

    The cross product of a vector with a null vector is:

    1. A) Zero

    2. B) A null vector

    3. C) The magnitude of the vector

    4. D) Unity

    Answer: B

    To understand why the cross product of a vector with a null vector is a null vector, we must look at the mathematical definition of the cross product operation. The cross product of two vectors, \(\vec{A}\) and \(\vec{B}\), is defined by the following formula:
    \[ \vec{A} \times \vec{B} = |\vec{A}| |\vec{B}| \sin(\theta) \hat{n} \]
    In this expression, \(|\vec{A}|\) and \(|\vec{B}|\) are the magnitudes of the vectors, \(\theta\) is the angle between them, and \(\hat{n}\) is a unit vector that indicates the direction of the resulting vector.

    A null vector (also known as a zero vector) is a vector that has a magnitude of exactly zero. If we let \(\vec{B}\) be the null vector, then its magnitude \(|\vec{B}| = 0\). When we substitute this value into the cross product formula, we get:
    \[ \vec{A} \times \vec{0} = |\vec{A}| \cdot 0 \cdot \sin(\theta) \cdot \hat{n} = \vec{0} \]
    Since the magnitude of the result is zero, the entire expression simplifies to a vector with zero magnitude. In vector algebra, it is crucial to distinguish between a scalar zero and a null vector. Because the cross product is a vector operation, the result must be a vector quantity. Therefore, the result is specifically a null vector rather than just the scalar number zero.

    This property holds true regardless of the direction or magnitude of the first vector, as the zero magnitude of the null vector effectively nullifies the entire product.

    In summary, the cross product of any vector with a null vector results in a null vector because the zero magnitude of the null vector forces the resulting vector's magnitude to be zero.
  103. Q103.

    If $\vec{A} \times \vec{B} = -\vec{B} \times \vec{A}$, this property is called:

    1. A) Commutative

    2. B) Associative

    3. C) Anti-commutative

    4. D) Distributive

    Answer: C

  104. Q104.

    The center of gravity of a body is the point where the entire weight of the body is considered to be acting:

    1. A) Horizontally

    2. B) Vertically downwards

    3. C) Vertically upwards

    4. D) At any angle

    Answer: B

  105. Q105.

    If the dot product of two vectors is negative, the angle between them is:

    1. A) Acute

    2. B) Obtuse

    3. C) Right

    4. D) $0^\circ$

    Answer: B

  106. Q106.

    The cross product of $\hat{k} \times \hat{i}$ is:

    1. A) $\hat{j}$

    2. B) $-\hat{j}$

    3. C) 0

    4. D) 1

    Answer: A

  107. Q107.

    The cross product of $\hat{i} \times \hat{k}$ is:

    1. A) $\hat{j}$

    2. B) $-\hat{j}$

    3. C) 0

    4. D) 1

    Answer: B

  108. Q108.

    The maximum number of components of a vector is:

    1. A) 1

    2. B) 2

    3. C) 3

    4. D) Unlimited

    Answer: D

  109. Q109.

    The resultant of two vectors is minimum when the angle between them is:

    1. A) $0^\circ$

    2. B) $90^\circ$

    3. C) $180^\circ$

    4. D) $45^\circ$

    Answer: C

  110. Q110.

    Which of the following is a scalar field?

    1. A) Temperature distribution in a room

    2. B) Wind speed

    3. C) Gravitational force

    4. D) Electric field

    Answer: A

  111. Q111.

    Which of the following is a vector field?

    1. A) Mass

    2. B) Density

    3. C) Gravitational field

    4. D) Time

    Answer: C

  112. Q112.

    A system of forces acting on a body is in equilibrium if:

    1. A) The net force is zero

    2. B) The net torque is zero

    3. C) Both A and B are true

    4. D) None of these

    Answer: C

  113. Q113.

    If a body is in linear equilibrium, it means:

    1. A) $\sum F_x=0$

    2. B) $\sum F_y=0$

    3. C) Its velocity is constant or zero

    4. D) All of these

    Answer: D

  114. Q114.

    A body in equilibrium can have a non-zero:

    1. A) Velocity

    2. B) Acceleration

    3. C) Net force

    4. D) Net torque

    Answer: A

  115. Q115.

    The first condition of equilibrium is also known as the condition for:

    1. A) Rotational equilibrium

    2. B) Translational equilibrium

    3. C) Static equilibrium

    4. D) Dynamic equilibrium

    Answer: B

  116. Q116.

    A ladder resting against a wall is an example of:

    1. A) Static equilibrium

    2. B) Dynamic equilibrium

    3. C) Unstable equilibrium

    4. D) Neutral equilibrium

    Answer: A

  117. Q117.

    A ball rolling on the ground at a constant speed is an example of:

    1. A) Static equilibrium

    2. B) Dynamic equilibrium

    3. C) Unstable equilibrium

    4. D) Neutral equilibrium

    Answer: B

  118. Q118.

    The moment of a couple depends on:

    1. A) The magnitude of the force

    2. B) The perpendicular distance between the forces

    3. C) Both A and B

    4. D) The point of application

    Answer: C

  119. Q119.

    The direction of a vector is independent of its:

    1. A) Magnitude

    2. B) Components

    3. C) Unit vector

    4. D) Tail

    Answer: A

  120. Q120.

    Which of the following is a scalar quantity?

    1. A) Acceleration

    2. B) Electric current

    3. C) Force

    4. D) Momentum

    Answer: B

  121. Q121.

    What is the angle between the vector $\vec{A} = \hat{i} + \hat{j}$ and the x-axis?

    1. A) $0^\circ$

    2. B) $45^\circ$

    3. C) $90^\circ$

    4. D) $180^\circ$

    Answer: B

    To determine the angle between a vector and the x-axis, we must analyze the components of the vector in the Cartesian coordinate system. The given vector is \(\vec{A} = \hat{i} + \hat{j}\).

    Step 1: Identify the components of the vector
    In the expression \(\vec{A} = \hat{i} + \hat{j}\), the coefficient of the unit vector \(\hat{i}\) represents the horizontal component (\(A_x\)) and the coefficient of the unit vector \(\hat{j}\) represents the vertical component (\(A_y\)).
    For this vector:
    \(A_x = 1\)
    \(A_y = 1\)

    Step 2: Use the trigonometric formula for the angle
    The angle \(\theta\) that a vector makes with the positive x-axis can be calculated using the tangent function, which is the ratio of the vertical component to the horizontal component:
    \[ \tan(\theta) = \frac{A_y}{A_x} \]
    Substituting the known values into the equation:
    \[ \tan(\theta) = \frac{1}{1} = 1 \]

    Step 3: Calculate the value of the angle
    To find the angle \(\theta\), we take the inverse tangent (arctan) of the result:
    \[ \theta = \tan^{-1}(1) \]
    From standard trigonometric values, we know that the tangent of \(45^\circ\) is 1. Therefore:
    \[ \theta = 45^\circ \]

    Since both components are positive, the vector lies in the first quadrant, confirming the angle is exactly \(45^\circ\).

    In summary, because the x and y components are equal, the vector bisects the angle between the axes, resulting in an angle of \(45^\circ\) with the x-axis.
  122. Q122.

    If the dot product of two vectors is equal to the product of their magnitudes, the vectors are:

    1. A) Perpendicular

    2. B) Parallel

    3. C) Anti-parallel

    4. D) Null vectors

    Answer: B

  123. Q123.

    The center of gravity is the point at which the total gravitational force acts. For a symmetrical body, it is usually located at:

    1. A) The edge

    2. B) The center

    3. C) The corner

    4. D) Outside the body

    Answer: B

  124. Q124.

    Which of the following is not a condition of equilibrium?

    1. A) Sum of all forces is zero

    2. B) Sum of all torques is zero

    3. C) The body is at rest

    4. D) The body has no angular acceleration

    Answer: C

  125. Q125.

    A vector that can be shifted parallel to itself without changing its properties is a:

    1. A) Free vector

    2. B) Localized vector

    3. C) Position vector

    4. D) Null vector

    Answer: A

  126. Q126.

    The scalar product of a vector with itself is:

    1. A) $\vec{A} \cdot \vec{A} = A^2$

    2. B) $\vec{A} \cdot \vec{A} = 0$

    3. C) $\vec{A} \times \vec{A} = A^2$

    4. D) $\vec{A} \times \vec{A} = 0$

    Answer: A

  127. Q127.

    The cross product of a vector with itself is:

    1. A) $\vec{A} \cdot \vec{A} = A^2$

    2. B) $\vec{A} \cdot \vec{A} = 0$

    3. C) $\vec{A} \times \vec{A} = A^2$

    4. D) $\vec{A} \times \vec{A} = 0$

    Answer: D

  128. Q128.

    Which of the following quantities can be zero for a body in equilibrium?

    1. A) Mass

    2. B) Velocity

    3. C) Net force

    4. D) Both B and C

    Answer: D

  129. Q129.

    The scalar product of two vectors is a:

    1. A) Scalar

    2. B) Vector

    3. C) Unit vector

    4. D) Tensor

    Answer: A

  130. Q130.

    The vector product of two vectors is a:

    1. A) Scalar

    2. B) Vector

    3. C) Unit vector

    4. D) Null vector

    Answer: B

  131. Q131.

    The formula for work done by a constant force is:

    1. A) $W = \vec{F} \times \vec{d}$

    2. B) $W = \vec{F} \cdot \vec{d}$

    3. C) $W = Fd\sin\theta$

    4. D) $W = Fd$

    Answer: B

  132. Q132.

    A body is in equilibrium if the sum of all forces and torques acting on it is:

    1. A) Maximum

    2. B) Minimum

    3. C) Zero

    4. D) Constant

    Answer: C

  133. Q133.

    What is the magnitude of the force required to produce a torque of 20 Nm at a distance of 4 m?

    1. A) 5 N

    2. B) 80 N

    3. C) 4 N

    4. D) 20 N

    Answer: A

    To find the magnitude of the force required, we must use the fundamental physics formula for torque. Torque is defined as the rotational equivalent of linear force and is calculated by multiplying the force applied by the distance from the pivot point (the lever arm).

    The mathematical relationship is expressed as: \[ \tau = F \times r \]
    Where:
    - \(\tau\) represents the torque, measured in Newton-meters (Nm).
    - \(F\) represents the magnitude of the force, measured in Newtons (N).
    - \(r\) represents the distance from the axis of rotation, measured in meters (m).

    In this specific problem, we are provided with the following values:
    - Torque (\(\tau\)) = 20 Nm
    - Distance (\(r\)) = 4 m

    To solve for the force (F), we can rearrange the formula as follows: \[ F = \frac{\tau}{r} \]
    Now, substitute the given values into the equation: \[ F = \frac{20 \text{ Nm}}{4 \text{ m}} \] \[ F = 5 \text{ N} \]
    By dividing the total torque by the distance from the pivot, we determine that a force of 5 Newtons is necessary to produce the specified torque.

    Therefore, the correct option is A because dividing 20 Nm by 4 m results in a force of 5 N.
  134. Q134.

    What is the SI unit of power?

    1. A) Joule

    2. B) Watt

    3. C) Newton

    4. D) Pascal

    Answer: B

  135. Q135.

    The concept of center of gravity is most relevant for a body under the influence of:

    1. A) A single force

    2. B) Multiple forces

    3. C) A uniform gravitational field

    4. D) No forces

    Answer: C

  136. Q136.

    The direction of a vector is given by:

    1. A) A number

    2. B) An angle

    3. C) A unit vector

    4. D) Both B and C

    Answer: D

  137. Q137.

    If $\vec{A} = 3\hat{i} + 4\hat{j}$, then the angle it makes with the y-axis is:

    1. A) $\cos^{-1}(3/5)$

    2. B) $\sin^{-1}(3/5)$

    3. C) $\tan^{-1}(4/3)$

    4. D) $\tan^{-1}(3/4)$

    Answer: A

  138. Q138.

    The negative of a vector has the same magnitude but:

    1. A) Opposite direction

    2. B) Same direction

    3. C) Perpendicular direction

    4. D) No direction

    Answer: A

  139. Q139.

    The magnitude of a vector $\vec{A}$ is represented by:

    1. A) $\vec{A}$

    2. B) $|\vec{A}|$

    3. C) $\hat{A}$

    4. D) A

    Answer: B

  140. Q140.

    The cross product of two vectors is a:

    1. A) Scalar

    2. B) Vector

    3. C) Unit

    4. D) Null

    Answer: B

  141. Q141.

    The dot product of two vectors is a:

    1. A) Scalar

    2. B) Vector

    3. C) Unit

    4. D) Null

    Answer: A

  142. Q142.

    Which of the following is not a vector?

    1. A) Displacement

    2. B) Temperature

    3. C) Momentum

    4. D) Electric field

    Answer: B

    To determine which of the options is not a vector, we must first distinguish between scalar and vector quantities. A vector quantity is a physical measurement that possesses both a magnitude (size) and a direction. In contrast, a scalar quantity is defined solely by its magnitude and does not have a direction associated with it.

    1. Displacement (Option A): Displacement refers to the change in position of an object. It describes how far an object is from its starting point and in what specific direction it moved. Because it requires both a numerical value and a direction, displacement is a vector quantity.

    2. Temperature (Option B): Temperature is a measure of the average kinetic energy of the particles in a system. When we state a temperature, such as \( 25^{\circ}C \), we are providing a magnitude only. It is physically meaningless to assign a direction to temperature (for example, one cannot have "25 degrees North"). Therefore, temperature is a scalar quantity.

    3. Momentum (Option C): Momentum is the product of an object's mass and its velocity. It is represented by the formula:
    \[ \vec{p} = m\vec{v} \]
    Since velocity is a vector, momentum is also a vector quantity, pointing in the same direction as the object's motion.

    4. Electric field (Option D): An electric field represents the force exerted per unit charge at a given point in space. It is defined by the formula:
    \[ \vec{E} = \frac{\vec{F}}{q} \]
    Because force is a vector, the electric field is also a vector quantity, as it has both a magnitude and a specific direction in which the force acts.

    By evaluating these definitions, we can see that temperature is the only quantity listed that does not involve a direction.

    Temperature is a scalar quantity because it is fully described by its magnitude alone, unlike the other options which are all vectors.
  143. Q143.

    The condition for equilibrium is also known as:

    1. A) Newton's second law

    2. B) Newton's first law

    3. C) The law of conservation of momentum

    4. D) The law of conservation of energy

    Answer: B

  144. Q144.

    The center of gravity of an irregularly shaped body can be found by:

    1. A) Calculation

    2. B) The plumb line method

    3. C) The head-to-tail rule

    4. D) The parallelogram method

    Answer: B

  145. Q145.

    The turning effect of a force is called:

    1. A) Momentum

    2. B) Impulse

    3. C) Torque

    4. D) Power

    Answer: C

  146. Q146.

    The unit vector in the direction of vector $\vec{A}$ is given by:

    1. A) $\vec{A}/|\vec{A}|$

    2. B) $|\vec{A}|/\vec{A}$

    3. C) $\vec{A} \cdot |\vec{A}|$

    4. D) $\vec{A} \times |\vec{A}|$

    Answer: A

  147. Q147.

    What is the angle between $\vec{A} = \hat{i}$ and $\vec{B} = \hat{j}$?

    1. A) $0^\circ$

    2. B) $45^\circ$

    3. C) $90^\circ$

    4. D) $180^\circ$

    Answer: C

  148. Q148.

    The magnitude of the torque is given by $\tau = rF\sin\theta$. The maximum value of $\tau$ is:

    1. A) $rF$

    2. B) 0

    3. C) $rF/2$

    4. D) $2rF$

    Answer: A

  149. Q149.

    A body is in rotational equilibrium if it is:

    1. A) At rest

    2. B) Rotating with constant angular velocity

    3. C) Not accelerating rotationally

    4. D) All of these

    Answer: D

  150. Q150.

    The magnitude of the cross product is equal to the area of the parallelogram formed by the two vectors. This is a property of the:

    1. A) Scalar product

    2. B) Vector product

    3. C) Both A and B

    4. D) None of these

    Answer: B

  151. Q151.

    Which of the following represents a scalar quantity?

    1. A) Acceleration

    2. B) Force

    3. C) Work

    4. D) Momentum

    Answer: C

  152. Q152.

    A body is said to be in complete equilibrium if it satisfies both:

    1. A) Translational and rotational equilibrium

    2. B) Static and dynamic equilibrium

    3. C) First and second conditions of equilibrium

    4. D) All of the above

    Answer: D

  153. Q153.

    The angle of a vector is usually measured from the:

    1. A) Negative x-axis

    2. B) Positive x-axis

    3. C) Negative y-axis

    4. D) Positive y-axis

    Answer: B

  154. Q154.

    A body is moving with uniform velocity. Its

    1. A) Speed changes

    2. B) Acceleration changes

    3. C) Direction of motion changes

    4. D) Displacement from origin changes

    Answer: D

  155. Q155.

    Which law of motion is also called law of inertia?

    1. A) 1st law

    2. B) 2nd law

    3. C) 3rd law

    4. D) All 1st, 2nd and 3rd law

    Answer: A

  156. Q156.

    Momentum depends upon

    1. A) Force acts on the body

    2. B) Mass of the body

    3. C) Velocity of the body

    4. D) Both mass and velocity of the body

    Answer: D

  157. Q157.

    Motorcycle safety helmet extends the time of collision hence decreasing the

    1. A) Change of collision

    2. B) Force acting

    3. C) Velocity

    4. D) Impulse

    Answer: B

  158. Q158.

    At maximum height on trajectory which of projectile becomes zero

    1. A) Acceleration

    2. B) Velocity

    3. C) Vertical velocity

    4. D) Horizontal velocity

    Answer: C

  159. Q159.

    When car takes turn around a curve road, the passengers feel a force acting on them in a direction away from the center of the curve. It is due to

    1. A) Centripetal force

    2. B) Gravitational force

    3. C) Their inertia

    4. D) Centrifugal force

    Answer: C

  160. Q160.

    Which of the following is not an example of projectile motion

    1. A) A gas filled balloon

    2. B) Bullet fired from gun

    3. C) A football kicked

    4. D) A baseball shot

    Answer: A

  161. Q161.

    for which the range and maximum height become equal?

    1. A) $tan^{-1}(1/4)$

    2. B) $tan^{-1}(4)$

    3. C) $tan^{-1}(1/2)$

    4. D) $tan^{-1}(2)$

    Answer: B

  162. Q162.

    Time rate of change of momentum is equal to

    1. A) Force

    2. B) Impulse

    3. C) Velocity

    4. D) Both A and C

    Answer: A

  163. Q163.

    The angle of projection, at which the range of projectile would become half of its maximum value.

    1. A) $45^{\circ}$

    2. B) $30^{\circ}$

    3. C) $15^{\circ}$

    4. D) $60^{\circ}$

    Answer: C

  164. Q164.

    Swimming is possible on account of

    1. A) 1st law of motion

    2. B) 2nd law of motion

    3. C) 3rd law of motion

    4. D) Newton’s law of Gravitation

    Answer: C

  165. Q165.

    If the momentum of a body changes from 100 N s to 200 N s in 10 s then the unbalance external force responsible to change the momentum is

    1. A) 5 N

    2. B) 2.5 N

    3. C) 2 N

    4. D) 10 N

    Answer: D

  166. Q166.

    An object is projected with 10 $ms^{-1}$ at angle of $60^{\circ}$ with the horizontal its range will be (Take g = 10 $ms^{-2}$):

    1. A) $5\sqrt{3}$ m

    2. B) $10\sqrt{3}$ m

    3. C) $3\sqrt{5}/5$ m

    4. D) None

    Answer: A

  167. Q167.

    Velocity and acceleration are in the same direction when

    1. A) Velocity of a car is increasing on a straight road

    2. B) Velocity of a car is decreasing on a straight road

    3. C) Car is turning round a corner

    4. D) None of these

    Answer: A

  168. Q168.

    When the average velocity of a moving body is equal to its instantaneous velocity then it is moving with

    1. A) Uniform velocity

    2. B) Variable velocity

    3. C) Uniform acceleration

    4. D) Variable acceleration

    Answer: A

  169. Q169.

    To a person going east in a car with a velocity of 10$ms^{-1}$, a train appears to move towards north with a velocity of $10\sqrt{3}$ $ms^{-1}$. The actual velocity of the train is

    1. A) 10 $ms^{-1}$ northeast

    2. B) 10 $ms^{-1}$ Northwest

    3. C) 20 $ms^{-1}$ Northeast

    4. D) 20 $ms^{-1}$ northwest

    Answer: C

    To find the actual velocity of the train, we must use the concept of relative velocity in two dimensions. Let us define the coordinate system where the East direction is represented by the unit vector \( \hat{i} \) and the North direction is represented by the unit vector \( \hat{j} \).

    1. Identify the given velocities:
    The velocity of the car (\( \vec{v}_c \)) is moving East at 10 \( ms^{-1} \). Therefore: \[ \vec{v}_c = 10 \hat{i} \] The apparent velocity of the train as seen from the car is the relative velocity of the train with respect to the car (\( \vec{v}_{tc} \)). It is given as \( 10\sqrt{3} \) \( ms^{-1} \) towards the North: \[ \vec{v}_{tc} = 10\sqrt{3} \hat{j} \]
    2. Apply the relative velocity formula:
    The relative velocity of the train with respect to the car is defined as: \[ \vec{v}_{tc} = \vec{v}_t - \vec{v}_c \] Where \( \vec{v}_t \) is the actual velocity of the train. To find \( \vec{v}_t \), we rearrange the equation: \[ \vec{v}_t = \vec{v}_{tc} + \vec{v}_c \] Substituting the vector values: \[ \vec{v}_t = 10\sqrt{3} \hat{j} + 10 \hat{i} \] \[ \vec{v}_t = 10 \hat{i} + 10\sqrt{3} \hat{j} \]
    3. Calculate the magnitude of the train's velocity:
    The magnitude \( |\vec{v}_t| \) is calculated using the Pythagorean theorem: \[ |\vec{v}_t| = \sqrt{(10)^2 + (10\sqrt{3})^2} \] \[ |\vec{v}_t| = \sqrt{100 + 300} \] \[ |\vec{v}_t| = \sqrt{400} = 20 \text{ ms}^{-1} \]
    4. Determine the direction:
    The angle \( \theta \) that the velocity vector makes with the East direction is: \[ \tan \theta = \frac{\text{North component}}{\text{East component}} = \frac{10\sqrt{3}}{10} = \sqrt{3} \] \[ \theta = \tan^{-1}(\sqrt{3}) = 60^\circ \] Since both the East and North components are positive, the train is moving in the Northeast direction.

    Conclusion:
    By vector addition of the car's velocity and the train's relative velocity, we find that the actual velocity of the train is 20 \( ms^{-1} \) in the Northeast direction.
  170. Q170.

    A ball is projected at 45° and its horizontal range is 10 m. Velocity of projection is

    1. A) $7\sqrt{3}$ $ms^{-1}$

    2. B) 15 $ms^{-1}$

    3. C) 9.6 $ms^{-1}$

    4. D) $7\sqrt{2}$ $ms^{-1}$

    Answer: D

  171. Q171.

    The ratio of distance to magnitude of displacement along a semi-circle of radius r is

    1. A) $2\pi$

    2. B) $\pi$

    3. C) $\pi/2$

    4. D) $3\pi$

    Answer: C

  172. Q172.

    The ratio of range to height at 45° is

    1. A) 1:4

    2. B) 1:2

    3. C) 4:1

    4. D) 2:1

    Answer: C

  173. Q173.

    If h = R then angle of projection is

    1. A) 45°

    2. B) 76°

    3. C) 60°

    4. D) 90°

    Answer: B

  174. Q174.

    Speedometer of an automobile measures

    1. A) Average velocity

    2. B) Instantaneous velocity

    3. C) Acceleration

    4. D) Instantaneous speed

    Answer: D

  175. Q175.

    Two bodies are projected at angles θ and (90°–θ) with the horizontal at the same speed. The ratio of their maximum heights is

    1. A) 1:1

    2. B) 1:tanθ

    3. C) 1:tanθ

    4. D) $tan^2:1$

    Answer: D

  176. Q176.

    An athlete completes one round of a circular track of radius R in 40 s. What will be displacement at the end of two minutes

    1. A) 0

    2. B) 2 R

    3. C) R

    4. D) 3 πR

    Answer: A

  177. Q177.

    When the mass and speed of a body are doubled K.E of body would

    1. A) Become 4 times

    2. B) Become 8 times

    3. C) Become 6 time

    4. D) Remain unchanged

    Answer: B

    To understand how the kinetic energy changes, we must first look at the standard formula for Kinetic Energy (K.E.):
    \[ K.E. = \frac{1}{2}mv^2 \]
    In this formula, m represents the mass of the body and v represents its speed.

    According to the question, both the mass and the speed of the body are doubled. Let the initial mass be m and the initial speed be v. We can define the new mass (m') and the new speed (v') as follows:
    New mass: \( m' = 2m \)
    New speed: \( v' = 2v \)

    Now, we substitute these new values into the kinetic energy formula to find the new kinetic energy (\( K.E._{new} \)):
    \[ K.E._{new} = \frac{1}{2} m' (v')^2 \]
    Substitute the doubled values:
    \[ K.E._{new} = \frac{1}{2} (2m) (2v)^2 \]
    Since \( (2v)^2 \) equals \( 4v^2 \), the equation becomes:
    \[ K.E._{new} = \frac{1}{2} (2m) (4v^2) \]
    By multiplying the constants (2 and 4), we get:
    \[ K.E._{new} = 8 \times (\frac{1}{2}mv^2) \]
    Because the original kinetic energy was \( \frac{1}{2}mv^2 \), we can see that the new kinetic energy is exactly 8 times the original value.

    In summary, because kinetic energy is directly proportional to mass and proportional to the square of the speed, doubling both factors results in the kinetic energy becoming 8 times larger.
  178. Q178.

    When a fighter plane chasing another plane opens fire, its speed

    1. A) Increases

    2. B) Remains same

    3. C) Decreases

    4. D) First decreases then increases

    Answer: C

    The phenomenon described in the question is a direct application of Newton's Third Law of Motion and the Law of Conservation of Momentum.

    When a fighter plane fires its guns, it ejects bullets or shells in the forward direction at a very high velocity. To propel these projectiles forward, the firing mechanism exerts a significant forward force on them. According to Newton's Third Law, for every action, there is an equal and opposite reaction. Consequently, the bullets exert an equal recoil force back onto the plane in the opposite direction of its flight.

    This backward force acts as a resistance to the plane's forward motion. From the perspective of the Law of Conservation of Momentum, the total momentum of the system (plane plus bullets) must remain constant if we ignore external forces like air resistance for a moment. This can be expressed as:
    \[ m_{p}v_{p} = (m_{p} - m_{b})v'_{p} + m_{b}v_{b} \]
    Where:
    \( m_{p} \) is the mass of the plane.
    \( v_{p} \) is the initial velocity of the plane.
    \( m_{b} \) is the mass of the bullets.
    \( v_{b} \) is the velocity of the bullets.
    \( v'_{p} \) is the final velocity of the plane.

    Because the bullets are fired forward with high momentum, the plane must experience a backward impulse to balance the system's total momentum. This backward impulse results in a deceleration, causing the plane's speed to drop.

    In summary, the backward recoil force produced by firing the weapons opposes the motion of the aircraft, leading to a decrease in its speed.
  179. Q179.

    If two forces inclined at 120° with each other are acting on a body of mass m, then the acceleration produced in the body will be

    1. A) $F/m$

    2. B) $\sqrt{3}F/m$

    3. C) $2F/m$

    4. D) $F/\sqrt{2}m$

    Answer: A

  180. Q180.

    At the highest point on the trajectory of a projectile, its

    1. A) Potential energy is minimum

    2. B) Kinetic energy is maximum

    3. C) Total energy is maximum

    4. D) Kinetic energy is minimum

    Answer: D

  181. Q181.

    If air is considered, then the maximum height achieved by the projectile

    1. A) Decreases

    2. B) Increases

    3. C) Remains same

    4. D) Very difficult to answer as no data provided

    Answer: A

  182. Q182.

    Motion along A B is

    1. A) Accelerated

    2. B) Retarded

    3. C) Uniform velocity

    4. D) Circular

    Answer: A

  183. Q183.

    If velocity time graph is a straight line parallel to time axis then body is

    1. A) Moving with zero acceleration

    2. B) Moving with constant velocity

    3. C) Covering equal displacement in equal intervals of time

    4. D) All of these

    Answer: D

  184. Q184.

    Two masses of 1 g and 4 g are moving with equal kinetic energies. The ration of the magnitudes of their linear momenta is

    1. A) 4 : 1

    2. B) 2:1

    3. C) 1 : 2

    4. D) 1 : 16

    Answer: C

    To find the ratio of the magnitudes of linear momenta, we must first establish the relationship between kinetic energy (K) and linear momentum (p).
    The standard formula for kinetic energy is: \[ K = \frac{1}{2}mv^2 \] And the formula for linear momentum is: \[ p = mv \] By rearranging the momentum formula to \( v = \frac{p}{m} \) and substituting it into the kinetic energy formula, we derive the following relationship: \[ K = \frac{p^2}{2m} \] From this, we can express the magnitude of linear momentum as: \[ p = \sqrt{2mK} \]
    In the given problem, we have two masses: Mass 1 (\( m_1 \)): 1 g
    Mass 2 (\( m_2 \)): 4 g
    The problem states that both masses have equal kinetic energies, so we can say \( K_1 = K_2 = K \).
    Now, we can set up the ratio of their linear momenta (\( p_1 : p_2 \)): \[ \frac{p_1}{p_2} = \frac{\sqrt{2m_1K}}{\sqrt{2m_2K}} \] Since the terms \( 2 \) and \( K \) are identical in both the numerator and the denominator, they cancel out, leaving us with: \[ \frac{p_1}{p_2} = \sqrt{\frac{m_1}{m_2}} \] Substituting the values of the masses into the equation: \[ \frac{p_1}{p_2} = \sqrt{\frac{1}{4}} \] \[ \frac{p_1}{p_2} = \frac{1}{2} \] The ratio of the magnitudes of their linear momenta is therefore 1 : 2, which corresponds to option C.
    Since momentum is proportional to the square root of mass when kinetic energy is constant, the object with the larger mass will have the larger momentum.
  185. Q185.

    The momentum of particle is numerically equal to its kinetic energy. What is the velocity of the particle?

    1. A) 9 $ms^{-1}$

    2. B) 3 $ms^{-1}$

    3. C) 2 $ms^{-1}$

    4. D) 1 $ms^{-1}$

    Answer: C

  186. Q186.

    The range of a projectile when launched at an angle of 15° with the horizontal is 1.5 m. its range, when launched at 45° with the same speed is

    1. A) 3.0 m

    2. B) 1.5 m

    3. C) 6.0 km

    4. D) 0.75 km

    Answer: A

    To determine the new range of the projectile, we must look at the physics formula for the horizontal range of a projectile launched from the ground.

    The horizontal range R is given by the formula: \[ R = \frac{u^2 \sin(2\theta)}{g} \] where:
    \( u \) is the initial launch speed,
    \( \theta \) is the launch angle with the horizontal, and
    \( g \) is the acceleration due to gravity.

    In this problem, the launch speed \( u \) and the acceleration due to gravity \( g \) remain constant. Therefore, the range \( R \) is directly proportional to \( \sin(2\theta) \). We can express this relationship as: \[ R \propto \sin(2\theta) \]
    We can set up a ratio between the two different launch scenarios: \[ \frac{R_2}{R_1} = \frac{\sin(2\theta_2)}{\sin(2\theta_1)} \]
    Given the initial conditions:
    \( R_1 = 1.5 \text{ m} \)
    \( \theta_1 = 15^\circ \)
    \( \theta_2 = 45^\circ \)

    Now, calculate the sine values for both cases:
    For the first case: \( \sin(2 \times 15^\circ) = \sin(30^\circ) = 0.5 \)
    For the second case: \( \sin(2 \times 45^\circ) = \sin(90^\circ) = 1 \)

    Substitute these values back into our ratio: \[ \frac{R_2}{1.5} = \frac{1}{0.5} \] \[ \frac{R_2}{1.5} = 2 \]
    Solving for \( R_2 \): \[ R_2 = 1.5 \times 2 = 3.0 \text{ m} \]
    Thus, when the projectile is launched at 45°, the range becomes 3.0 m.

    Summary: Since the range is proportional to the sine of twice the launch angle, increasing the angle from 15° to 45° doubles the range from 1.5 m to 3.0 m.
  187. Q187.

    A bomb of mass 12 kg, initially at rest, explodes into two pieces of masses 4 kg and 9 kg. Speed of the 8 kg mass is 6 $ms^{-1}$ the kinetic energy of the 4 kg mass is

    1. A) 32 J

    2. B) 48 J

    3. C) 114 J

    4. D) 288 J

    Answer: D

  188. Q188.

    A stone is thrown vertically upwards with a velocity of 30 $ms^{-1}$. If the acceleration due to gravity is 10 $ms^{-2}$. What is the distance traveled by the particle during the first second of its motion? Take $g=10\u200ams^{-2}$

    1. A) 30 m

    2. B) 25 m

    3. C) 10 m

    4. D) None of these

    Answer: B

  189. Q189.

    A body starting from rest covers a distance of 0.45 km and acquires a velocity o 300 km/hr. Its acceleration will be

    1. A) 0.092 $ms^{-2}$

    2. B) 0.5 $ms^{-2}$

    3. C) 7.71 $ms^{-2}$

    4. D) 0.15 $ms^{-2}$

    Answer: C

  190. Q190.

    A force of 100 N acts in a body for 4 seconds, what will be the change in momentum

    1. A) 20 N - s

    2. B) 500 N - s

    3. C) 400 N - s

    4. D) 1000 N - s

    Answer: C

  191. Q191.

    The speed of projectile at its highest point if it is projected with initial velocity $v_i$ and at an angle of 45° with the horizontal.

    1. A) $v_i/2\sqrt{2}$

    2. B) $v_i/\sqrt{4}$

    3. C) $v_i/\sqrt{2}$

    4. D) $v_i/\sqrt{3}$

    Answer: C

  192. Q192.

    The distance covered by a body in time t starting from rest is

    1. A) $at^2/2$

    2. B) vt

    3. C) $at^2/2$

    4. D) $at^2$

    Answer: A

  193. Q193.

    A train of 150 m length is going toward north direction at a speed of 10 $ms^{-1}$ and a parrot is flying towards south direction parallel to the railway track with a speed of 5 $ms^{-1}$. The time taken by the parrot to cross the train is equal to

    1. A) 12 s

    2. B) 8 s

    3. C) 15 s

    4. D) 10 s

    Answer: D

  194. Q194.

    The speed of projectile at its highest point if it is projected with initial velocity $v_i$ and at an angle of 45° with the horizontal.

    1. A) $v_i/2\sqrt{2}$

    2. B) $v_i/\sqrt{4}$

    3. C) $v_i/\sqrt{2}$

    4. D) $v_i/\sqrt{3}$

    Answer: C

  195. Q195.

    The weight of objects in a rocket when its engine is operating

    1. A) Is constant

    2. B) Is decreasing

    3. C) Is Increasing

    4. D) Is zero

    Answer: C

    When a rocket engine is operating, it generates a powerful upward thrust that causes the rocket to accelerate. The weight that an object or person experiences in this accelerating environment is known as apparent weight.
    The apparent weight \( W_{a} \) of an object in an upwardly accelerating rocket can be expressed by the formula: \[ W_{a} = m(g + a) \] In this equation:
    - \( m \) represents the mass of the object.
    - \( g \) represents the acceleration due to gravity.
    - \( a \) represents the upward acceleration produced by the rocket's engine.
    Because the engine is providing an upward acceleration \( a \), this value is added to the acceleration of gravity \( g \). This makes the total effective acceleration \( (g + a) \) larger than the standard gravity alone, which causes the objects inside to feel heavier.
    Furthermore, as the rocket consumes its fuel, its total mass decreases. According to Newton's Second Law (\( F = ma \)), if the thrust \( F \) remains constant while the mass \( m \) decreases, the acceleration \( a \) must increase. As the acceleration increases, the value of \( m(g + a) \) also increases, leading to a continuous rise in the apparent weight of the objects inside the rocket during the flight.
    Summary: The weight of objects increases because the rocket's upward acceleration adds to the force of gravity, resulting in a higher apparent weight.
  196. Q196.

    The ratio of height and range of projectile when projected at angle θ is

    1. A) $4/tan\theta$

    2. B) $tan\theta/4$

    3. C) 4 $tan\theta$

    4. D) $tan\theta+4$

    Answer: B

  197. Q197.

    When line of action of applied force passes through the pivot then torque will be

    1. A) Maximum

    2. B) Constant

    3. C) Negative

    4. D) Zero

    Answer: D

  198. Q198.

    A uniform plank of weight 100 N is 2000 mm long and rests on a support that is 400 mm from end E. At what distance from E must a 160 N weight be placed in order to balance the plank?

    1. A) 150 mm

    2. B) 125 mm

    3. C) 25 mm

    4. D) None of these

    Answer: B

  199. Q199.

    A 450 N child is sitting on a seesaw 0.5 meter from the balance point, as shown below. How far, on the other side, should a 500 N child sit so that the seesaw will remain in balance?

    1. A) Less than 50 cm

    2. B) Less than 45 cm

    3. C) Greater than 45 cm

    4. D) Greater than 50 cm

    Answer: A